An official website of the United States government
Abstract Damage caused by earthquakes to buildings and their contents (e.g., sensitive equipment) can impact life safety and disrupt business operations following an event. Floor isolation systems (FISs) are a promising retrofit strategy for protecting vital building contents. In this study, real‐time hybrid simulation (RTHS) is utilized to experimentally incorporate multi‐scale (building–FIS–equipment) interactions. For this, an experimental setup representing one bearing of a rolling pendulum (RP) based FIS is studied—first through characterization tests and then through RTHS. A series of tests was conducted at the Natural Hazards Engineering Research Infrastructure (NHERI) Experimental Facility at Lehigh University. Multiple excitations were used to study the experimental setup under uni‐axial loading. Details of the experimental testbed and test protocols for the characterization and RTHS tests are presented, along with results from these tests, which focused on the effect of different rolling surface treatments for supplemental damping, the FIS–equipment and building–FIS interactions, and rigorous evaluation of different RP isolation bearing designs through RTHS.
more »
« less
MULTI-DIRECTIONAL SHAKE TABLE REAL-TIME HYBRID SIMULATIONS OF FLOOR ISOLATION SYSTEMS IN BUILDINGS
Seismic resiliency includes the ability to protect the contents of mission-critical buildings from becoming damaged. The contents include telecommunication and other types of electronic equipment in mission-critical data centres. One technique to protect sensitive equipment in buildings is the use of floor isolation systems (FIS). Multi-directional shake table real-time hybrid simulation (RTHS) is utilized in this paper to validate the performance of full-scale rolling pendulum (RP) bearings, incorporating multi-scale (building– FIS–equipment) interactions. The analytical substructure for the RTHS included 3D nonlinear models of the building and isolated equipment, while the experimental substructure was comprised of the FIS. The RTHS test setup consisted of the FIS positioned on a shake table, where it is coupled to the analytical substructure and subjected to multi-directional deformations caused by the building’s floor accelerations and equipment motion from an earthquake. Parametric studies were performed to assess the influence of different building lateral load systems on the performance of the FISs. The lateral load resisting systems included buildings with steel moment resisting frame (SMRF) systems and with buckling restrained braced frame (BRBF) systems. Each building type was subjected to multi-directional ground motions of different sources and hazard levels. Details of the experimental test setup, RTHS test protocol and main preliminary results on the multi-directional testing of an RP-based FIS are described. Challenges in conducting the multi-axial RTHS, including the nonlinear kinematics transformation, adaptive compensation for the actuator-table dynamics, along with the approaches used to overcome them are presented. The acceleration and deformation response of the isolated equipment is assessed to demonstrate the effectiveness of the FIS in mitigating the effects of multi-directional seismic loading on isolated equipment in mission-critical buildings.
more »
« less
- Award ID(s):
- 2037771
- PAR ID:
- 10562138
- Publisher / Repository:
- 18th WCEE
- Date Published:
- Journal Name:
- World Conference on Earthquake Engineering proceedings
- ISSN:
- 3006-5933
- Format(s):
- Medium: X
- Location:
- Milan Italy
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Floor isolation systems (FISs) are used to mitigate earthquake-induced damage to sensitive building contents and equipment. Traditionally, the isolated floor and the primary building structure (PS) are analyzed independently, assuming the PS response is uncoupled from the FIS response. Dynamic coupling may be non-negligible when nonlinearities are present under large deflections at strong disturbance levels. This study investigates a multi-functional FIS that functions primarily as an isolator (i.e., attenuating total acceleration sustained by the isolated equipment) at low-to-moderate disturbance levels, and then passively adapt under strong disturbances to function as a nonlinear (vibro-impact) dynamic vibration absorbers to protect the PS (i.e., reducing inter-story drifts). The FIS, therefore, functions as a dual-model vibration isolator/absorber system, with displacement dependent response adaptation. A scale experimental model—consisting of a three-story frame and an isolated mass—is used to demonstrate and evaluate the design methodology via shake table tests. The properties of the 3D-printed rolling pendulum (RP) bearing, the seismic gap, and the impact mechanism are optimized to achieve the desired dual-mode performance. A suite of four ground motions with varying spectral qualities are used, and their amplitudes are scaled to represent various hazards—from service level earthquake (SLE), to design basis earthquake (DBE), and even maximum considered earthquake (MCE). The performance of the multi-functional FIS is established and is described in this paper.more » « less
-
Conventional lateral force-resisting systems can provide a stable, ductile response but also experience significant inelastic demands, rendering repairs impractical or uneconomical. Thus, there is a need for novel structural systems that protect structural and nonstructural components to reduce post-earthquake repairs and downtime. A U.S.-Japan research team – including three U.S. universities, two Japanese universities, and two major experimental research labs – is developing a structural solution to reduce peak drift and acceleration demands, thereby protecting buildings, their contents, and occupants during major earthquakes. The primary components of the system are: (1) steel base moment-resisting frames designed and detailed to behave in the inelastic range and dissipate energy, (2) stiff and strong elastic spines designed to remain essentially elastic to redistribute seismic demands more uniformly over the building height, and (3) force-limiting connections (FLC) that connect the frame to the spines to provide a yielding mechanism that limits acceleration demands. This economical earthquake-resilient system is intended to be used in essential facilities, such as hospitals, where damage to the buildings and contents and occupant injuries must be prevented and where continuity of operation is imperative. The system was recently tested at full scale at the E-Defense shake-table facility in Miki, Japan. This paper provides an overview of pre-test numerical simulations, shake-table test setup and instrumentation, and preliminary test results.more » « less
-
This project provides an in-depth study into how floor isolation systems (FISs) perform when subjected to floor accelerations from a 3D building model of a special concentrically steel braced frame (SCSBF) building during real-time hybrid simulation (RTHS). The project details the creation and study of a 3D model of a SCSBF building using HyCoM-3D, a 3D modeling software created for use at the NHERI Lehigh Experimental Facility. Data in this project can be reused to further assess how FISs behave when subjected to accelerations and their ability to isolate large nonstructural components of buildings and lessen their damage when subjected to different accelerations due to different building configurations. This project is unique because it considers the multi-directional response of a FIS subjected to floor motions simulated from a 3D, nonlinear model of a SCSBF building. The main audience is researchers and professionals interested in learning more about how FISs can limit damage to nonstructural building components.more » « less
-
A new seismic-resilient structural system is being developed to protect buildings, their contents, and occupants during major earthquakes. This economical system is intended for essential facilities, such as hospitals, where damage to the buildings and contents and occupant injuries must be prevented and where continuity of operation is imperative. The primary components of the Frame-Spine-FLC System are: (1) steel base moment-resisting frames designed and detailed to behave in the inelastic range and dissipate energy, (2) stiff and strong elastic spines designed to remain essentially elastic to redistribute seismic demands more uniformly over the building height, and (3) force-limiting connections (FLC) that connect the frame to the spines to provide a yielding mechanism that limits acceleration demands. An international team, including three U.S. universities, two Japanese universities and two major experimental research labs, is collaborating on this project and recently conducted full-scale shake-table testing at the E-Defense facility in Miki, Japan. The test building represents a hospital facility and includes realistic nonstructural components and medical equipment. This paper provides an overview of the shake-table testing program and presents preliminary results that demonstrate the seismic stability response of the Frame-Spine-FLC System and the overall viability of the new concept.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Proceeding:
- The DOI is not currently available.
