An official website of the United States government
Abstract Vorticella convallariaare microscopic sessile suspension feeders that live attached to substrates in aquatic environments. They feed using a self‐generated current and help maintain the health of aquatic ecosystems and wastewater treatment facilities by consuming bacteria and detritus. Their environmental impact is mediated by their feeding rate. In ambient flow, feeding rates are highly dependent on an individual's orientation relative to the substrate and the flow. Here, we investigate how this orientation is impacted by flow speed. Furthermore, we examined whether individuals actively avoid orientations unfavorable for feeding. We exposed individuals to unidirectional laminar flow at shear rates of 0, 0.5, 1.0, and 1.5 s−1, and recorded their 3D orientation using a custom biplanar microscope. We determined thatV. convallariaorientation became progressively tilted downstream as the shear rate increased, but individuals were still able to actively reorient. Additionally, at higher shear rates, individuals spent a larger fraction of their time in orientations with reduced feeding rates. Our shear rates correspond to freestream flows on the scale of mm s−1to cm s−1in natural environments.
more »
« less
Data from: The effect of external flow on 3D orientation of a microscopic sessile suspension feeder, Vorticella convallaria
Vorticella convallaria are microscopic sessile suspension feeders that live attached to substrates in aquatic environments. They feed using a self‐generated current and help maintain the health of aquatic ecosystems and wastewater treatment facilities by consuming bacteria and detritus. Their environmental impact is mediated by their feeding rate. In ambient flow, feeding rates are highly dependent on an individual's orientation relative to the substrate and the flow. Here, we investigate how this orientation is impacted by flow speed. Furthermore, we examined whether individuals actively avoid orientations unfavorable for feeding. We exposed individuals to unidirectional laminar flow at shear rates of 0, 0.5, 1.0, and 1.5 s−1, and recorded their 3D orientation using a custom biplanar microscope. We determined that V. convallaria orientation became progressively tilted downstream as the shear rate increased, but individuals were still able to actively reorient. Additionally, at higher shear rates, individuals spent a larger fraction of their time in orientations with reduced feeding rates. Our shear rates correspond to freestream flows on the scale of mm s−1 to cm s−1 in natural environments.
more »
« less
- Award ID(s):
- 1755326
- PAR ID:
- 10565255
- Publisher / Repository:
- Dryad
- Date Published:
- Subject(s) / Keyword(s):
- Vorticella Microscopic sessile suspension feeder feeding current microscale flow low reynolds number stokeslet FOS: Physical sciences FOS: Physical sciences
- Format(s):
- Medium: X Size: 5513601 bytes
- Size(s):
- 5513601 bytes
- Right(s):
- Creative Commons Zero v1.0 Universal
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.more » « less
-
Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.more » « less
-
Lyotropic chromonic liquid crystals (LCLCs) represent aqueous dispersions of organic disk-like molecules that form cylindrical aggregates. Despite the growing interest in these materials, their flow behavior is poorly understood. Here, we explore the effect of shear on dynamic structures of the nematic LCLC, formed by 14 wt% water dispersion of disodium cromoglycate (DSCG). We employ in situ polarizing optical microscopy (POM) and small-angle and wide-angle X-ray scattering (SAXS/WAXS) to obtain independent and complementary information on the director structures over a wide range of shear rates. The DSCG nematic shows a shear-thinning behavior with two shear-thinning regions (Region I at < 1 s −1 and Region III at > 10 s −1 ) separated by a pseudo-Newtonian Region II (1 s −1 < < 10 s −1 ). The material is of a tumbling type. In Region I, < 1 s −1 , the director realigns along the vorticity axis. An increase of above 1 s −1 triggers nucleation of disclination loops. The disclinations introduce patches of the director that deviates from the vorticity direction and form a polydomain texture. Extension of the domains along the flow and along the vorticity direction decreases with the increase of the shear rate to 10 s −1 . Above 10 s −1 , the domains begin to elongate along the flow. At > 100 s −1 , the texture evolves into periodic stripes in which the director is predominantly along the flow with left and right tilts. The period of stripes decreases with an increase of . The shear-induced transformations are explained by the balance of the elastic and viscous energies. In particular, nucleation of disclinations is associated with an increase of the elastic energy at the walls separating nonsingular domains with different director tilts. The uncovered shear-induced structural effects would be of importance in the further development of LCLC applications.more » « less
-
Abstract Shear-induced formation of crystal nuclei in polyamide 11 (PA 11) was studied using a conventional parallel-plate rheometer. Crystallization of PA 11 after shearing the melt at different rates for 60 s was followed by the evolution of the complex viscosity. The sheared samples showed in an optical microscope a gradient structure along the radius, due to the increasing shear rate from the center to the edge. The critical shear rate for shear-induced formation of nuclei was identified at the position where a distinct change of the semicrystalline superstructure is observed, being at around 1 to 2 s −1 . Below this threshold, a space-filled spherulitic superstructure developed as in quiescent-melt crystallization. Above this value, after shearing at rates between 1 and 5 s −1 , an increased number of point-like nuclei was detected, connected with formation of randomly oriented crystals. Shearing the melt at even higher rates led to a further increase of the nuclei number and growth of crystals oriented such that the chain axis is in parallel to the direction of flow. In addition, optical microscopy confirmed formation of long fibrillar structures after shearing at such condition. The critical specific work of flow of PA 11 was calculated to allow a comparison with that of polyamide 66 (PA 66). This comparison showed that in the case of PA 11 more work for shear-induced formation of nuclei is needed than in the case of PA 66, discussed in terms of the chemical structure of the repeat unit in the chains. Graphical abstractmore » « less
