An official website of the United States government
The many-body expansion (MBE) is promising for the efficient, parallel computation of lattice energies in organic crystals. Very high accuracy should be achievable by employing coupled-cluster singles, doubles, and perturbative triples at the complete basis set limit [CCSD(T)/CBS] for the dimers, trimers, and potentially tetramers resulting from the MBE, but such a brute-force approach seems impractical for crystals of all but the smallest molecules. Here, we investigate hybrid or multi-level approaches that employ CCSD(T)/CBS only for the closest dimers and trimers and utilize much faster methods like Møller–Plesset perturbation theory (MP2) for more distant dimers and trimers. For trimers, MP2 is supplemented with the Axilrod–Teller–Muto (ATM) model of three-body dispersion. MP2(+ATM) is shown to be a very effective replacement for CCSD(T)/CBS for all but the closest dimers and trimers. A limited investigation of tetramers using CCSD(T)/CBS suggests that the four-body contribution is entirely negligible. The large set of CCSD(T)/CBS dimer and trimer data should be valuable in benchmarking approximate methods for molecular crystals and allows us to see that a literature estimate of the core-valence contribution of the closest dimers to the lattice energy using just MP2 was overbinding by 0.5 kJ mol−1, and an estimate of the three-body contribution from the closest trimers using the T0 approximation in local CCSD(T) was underbinding by 0.7 kJ mol−1. Our CCSD(T)/CBS best estimate of the 0 K lattice energy is −54.01 kJ mol−1, compared to an estimated experimental value of −55.3 ± 2.2 kJ mol−1.
more »
« less
This content will become publicly available on December 7, 2025
Convergence of the many-body expansion with respect to distance cutoffs in crystals of polar molecules: Acetic acid, formamide, and imidazole
The many-body expansion, where one computes the total energy of a supersystem as the sum of the dimer, trimer, tetramer, etc., subsystems, provides a convenient approach to compute the lattice energies of molecular crystals. We investigate approximate methods for computing the non-additive three-body contributions to the crystal lattice energy of the polar molecules acetic acid, imidazole, and formamide, comparing to coupled-cluster singles, doubles, and perturbative triples [CCSD(T)] level benchmarks. Second-order Møller–Plesset perturbation theory (MP2), if combined with a properly damped Axilrod–Teller–Muto dispersion potential, displays excellent agreement with CCSD(T) at a substantially reduced cost. Errors between dispersion-corrected MP2 and CCSD(T) are less than 1 kJ mol−1 for all three crystals. However, the three-body energy requires quite large distance cutoffs to converge, up to 20 Å or more.
more »
« less
- Award ID(s):
- 1955940
- PAR ID:
- 10566305
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- The Journal of Chemical Physics
- Volume:
- 161
- Issue:
- 21
- ISSN:
- 0021-9606
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
To study the contribution of three-body dispersion to crystal lattice energies, we compute the three-body contributions to the lattice energies for crystalline benzene, carbon dioxide, and triazine using various computational methods. We show that these contributions converge quickly as the intermolecular distances between the monomers grow. In particular, the smallest value among the three pairwise intermonomer closest-contact distances, Rmin, shows a strong correlation with the three-body contribution to the lattice energy, and, here, the largest of the closest-contact distances, Rmax, serves as a cutoff criterion to limit the number of trimers to be considered. We considered all trimers up to Rmax=15Å. The trimers with Rmin<4Å contribute 90.4%, 90.6%, and 93.9% of the total three-body contributions for crystalline benzene, carbon dioxide, and triazine, respectively, for the coupled-cluster singles, doubles, and perturbative triples [CCSD(T)] method. For trimers with Rmin>4Å, the second-order Møller–Plesset perturbation theory (MP2) supplemented with the Axilrod–Teller–Muto (ATM) three-body dispersion correction reproduces the CCSD(T) values for the cumulative three-body contributions with errors of less than 0.1 kJ mol−1. Moreover, three-body contributions are converged within 0.15 kJ mol−1 by Rmax=10Å. From these results, it appears that in molecular crystals where dispersion dominates the three-body contribution to the lattice energy, the trimers with Rmin>4Å can be computed with the MP2+ATM method to reduce the computational cost, and those with Rmax>10Å appear to be basically negligible.more » « less
-
Insight into the Binding of Argon to Cyclic Water Clusters from Symmetry-Adapted Perturbation TheoryThis work systematically examines the interactions between a single argon atom and the edges and faces of cyclic H2O clusters containing three–five water molecules (Ar(H2O)n=3–5). Full geometry optimizations and subsequent harmonic vibrational frequency computations were performed using MP2 with a triple-ζ correlation consistent basis set augmented with diffuse functions on the heavy atoms (cc-pVTZ for H and aug-cc-pVTZ for O and Ar; denoted as haTZ). Optimized structures and harmonic vibrational frequencies were also obtained with the two-body–many-body (2b:Mb) and three-body–many-body (3b:Mb) techniques; here, high-level CCSD(T) computations capture up through the two-body or three-body contributions from the many-body expansion, respectively, while less demanding MP2 computations recover all higher-order contributions. Five unique stationary points have been identified in which Ar binds to the cyclic water trimer, along with four for (H2O)4 and three for (H2O)5. To the best of our knowledge, eleven of these twelve structures have been characterized here for the first time. Ar consistently binds more strongly to the faces than the edges of the cyclic (H2O)n clusters, by as much as a factor of two. The 3b:Mb electronic energies computed with the haTZ basis set indicate that Ar binds to the faces of the water clusters by at least 3 kJ mol−1 and by nearly 6 kJ mol−1 for one Ar(H2O)5 complex. An analysis of the interaction energies for the different binding motifs based on symmetry-adapted perturbation theory (SAPT) indicates that dispersion interactions are primarily responsible for the observed trends. The binding of a single Ar atom to a face of these cyclic water clusters can induce perturbations to the harmonic vibrational frequencies on the order of 5 cm−1 for some hydrogen-bonded OH stretching frequencies.more » « less
-
An impressive collection of accurate two-body interaction energies for small complexes has been assembled into benchmark databases and used to improve the performance of multiple density functional, semiempirical, and machine learning methods. Similar benchmark data on nonadditive three-body energies in molecular trimers are comparatively scarce, and the existing ones are practically limited to homotrimers. In this work, we present a benchmark dataset of 20 equilibrium noncovalent interaction energies for a small but diverse selection of 10 heteromolecular trimers. The new 3BHET dataset presents complexes that combine different interactions including π −π, anion−π, cation−π, and various motifs of hydrogen and halogen bonding in each trimer. A detailed symmetry-adapted perturbation theory (SAPT)-based energy decomposition of the two- and three-body interaction energies shows that 3BHET consists of electrostatics- and dispersion-dominated complexes. The nonadditive three-body contribution is dominated by induction, but its influence on the overall bonding type in the complex (as exemplified by its position on the ternary diagram) is quite small. We also tested the extended SAPT (XSAPT) approach which is capable of including some nonadditive interactions in clusters of any size. The resulting three-body dispersion term (obtained from the many-body dispersion formalism) is mostly in good agreement with the supermolecular CCSD(T)−MP2 values and the nonadditive induction term is similar to the three-body SAPT(DFT) data, but the overall three-body XSAPT energies are not very accurate as they are missing the first-order exchange terms.more » « less
-
Conformational polymorphs of organic molecular crystals represent a challenging test for quantum chemistry because they require careful balancing of the intra- and intermolecular interactions. This study examines 54 molecular conformations from 20 sets of conformational polymorphs, along with the relative lattice energies and 173 dimer interactions taken from six of the polymorph sets. These systems are studied with a variety of van der Waals-inclusive density functionals theory models; dispersion-corrected spin-component-scaled second-order Møller–Plesset perturbation theory (SCS-MP2D); and domain local pair natural orbital coupled cluster singles, doubles, and perturbative triples [DLPNO-CCSD(T)]. We investigate how delocalization error in conventional density functionals impacts monomer conformational energies, systematic errors in the intermolecular interactions, and the nature of error cancellation that occurs in the overall crystal. The density functionals B86bPBE-XDM, PBE-D4, PBE-MBD, PBE0-D4, and PBE0-MBD are found to exhibit sizable one-body and two-body errors vs DLPNO-CCSD(T) benchmarks, and the level of success in predicting the relative polymorph energies relies heavily on error cancellation between different types of intermolecular interactions or between intra- and intermolecular interactions. The SCS-MP2D and, to a lesser extent, ωB97M-V models exhibit smaller errors and rely less on error cancellation. Implications for crystal structure prediction of flexible compounds are discussed. Finally, the one-body and two-body DLPNO-CCSD(T) energies taken from these conformational polymorphs establish the CP1b and CP2b benchmark datasets that could be useful for testing quantum chemistry models in challenging real-world systems with complex interplay between intra- and intermolecular interactions, a number of which are significantly impacted by delocalization error.more » « less
