skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Single-crystal analysis of La-doped pyromorphite [Pb5(PO4)3Cl]
Abstract Rare earth elements (REE) in calcium apatite have been widely described in the literature. Based on the investigations of minerals and their synthetic analogs, the mechanism of substitution of REE3+ for Ca2+ and their structural positions are well established. Although the presence of REE in natural pyromorphite has been reported, the structural response of substitution of REE3+ for Pb2+ is not established. A better understanding of REE-rich Pb-apatite may facilitate the potential use of this mineral in industrial processes. Two La-doped pyromorphite analogs [Pb5(PO4)3Cl] and two control pyromorphite analogs (with the absence of La) were synthesized from aqueous solutions at 25 °C. Na+ and K+ were used as charge-compensating ions to facilitate the incorporation of trivalent REE cations (La3+ + Na+ ↔ 2Pb2+ and La3+ + K+ ↔ 2Pb2+). Microprobe analysis, scanning electron microscopy, and Raman spectroscopy were used to confirm the purity of obtained phases. High-precision crystal structure refinements (R1 = 0.0140–0.0225) of all four compounds were performed from single-crystal X-ray diffraction data. The La content varied from 0.12(1) to 0.19(1) atoms per formula unit with the counter ions of K+ and Na+, respectively. Both substituting ions were accommodated at the Pb1 site only. By comparing the La-doped pyromorphite analogs with their control samples, it was possible to detect small changes in bond distances and polyhedral volumes caused by the La substitution. Variations in individual and mean interatomic distances reflected the cumulative effect of both the amount of substitution and ionic radii of substituting ions (La3+, Na+, and K+).  more » « less
Award ID(s):
2025319
PAR ID:
10566839
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Mineralogical Society of America
Date Published:
Journal Name:
American Mineralogist
Volume:
108
Issue:
12
ISSN:
0003-004X
Page Range / eLocation ID:
2323 to 2330
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Goldschmidt)
    Critical mineral deposits commonly form in magmatic-hydrothermal systems including carbonatites and/or alkaline syenites, and more evolved peralkaline granites where the rare earth element (REE) undergo a complex array of partitioning, transport and mineralization. Significant alteration and veining zones develop in these deposits and can be used to vector ore zones in the field [1]. The REE ore minerals typically reflect the characteristics of these systems, which are enriched in carbonate, fluoride, and phosphate or a combination thereof. The REE can also be incorporated into vein minerals such as calcite, fluorite and apatite where the REE3+ exchange for Ca2+ on the crystal lattice [2]. These minerals give us clues about the hydrothermal reaction paths of REE in critical mineral deposits. This study aims to: 1) present our recent findings from hydrothermal fluid-mineral REE partitioning experiments, 2) discuss thermodynamic models to simulate REE in critical mineral deposits, and 3) link the thermodynamic simulations to field observations. Hydrothermal fluid-calcite partitioning experiments were conducted between 100 and 200 °C by hydrothermal fluid mixing and precipitation [2] at near neutral to mildly alkaline pH (6 – 9). The REE concentrations in synthetic calcite crystals and aqueous fluids sampled in situ were used to fit the data to the lattice strain model [3] and using the Dual Thermodynamic approach [4]. A second type of experiment consisted of reacting natural fluorite and apatite crystals with acidic to mildly acidic (pH of 2 – 4) aqueous fluids in batch-type reactors to study the behavior of REE and mineral dissolution-precipitation reactions near crystal surfaces. The GEMS code package [5] was used to implement these new data into a thermodynamic model and simulate possible REE reaction paths in hydrothermal fluids. Two REE mineral deposits in New Mexico (Lemitar and Gallinas Mountains) present ideal case studies to illustrate how these models can be linked to field observations from natural systems. [1] Gysi et al. (2016), Econ. Geol. 111, 1241-1276; [2] Perry and Gysi (2020), Geochim. Cosmochim. Acta 286, 177-197; [3] Blundy and Wood (1994) Nature 372, 452-454; [4] Kulik (2006), Chem. Geol. 225, 189-212; [5] Kulik et al. (2013), Computat. Geosci. 17, 1-24. 
    more » « less
  2. ; ; ; ; ; (, American Mineralogist: Journal of Earth and Planetary Materials)
    Abstract Partition coefficients for rare earth elements (REEs) between apatite and basaltic melt were determined as a function of oxygen fugacity (fO2; iron-wüstite to hematite-magnetite buffers) at 1 bar and between 1110 and 1175 °C. Apatite-melt partitioning data for REE3+ (La, Sm, Gd, Lu) show near constant values at all experimental conditions, while bulk Eu becomes more incompatible (with an increasing negative anomaly) with decreasing fO2. Experiments define three apatite calibrations that can theoretically be used as redox sensors. The first, a XANES calibration that directly measures Eu valence in apatite, requires saturation at similar temperature-composition conditions to experiments and is defined by: ( E u 3 + ∑ E u ) Apatite  = 1 1 + 10 - 0.10 ± 0.01 × l o g ⁡ ( f o 2 ) - 1.63 ± 0.16 . The second technique involves analysis of Sm, Eu, and Gd in both apatite and coexisting basaltic melt (glass), and is defined by: ( Eu E u * ) D Sm × Gd = 1 1 + 10 - 0.15 ± 0.03 × l o g ⁡ ( f o 2 ) - 2.46 ± 0.41 . The third technique is based on the lattice strain model and also requires analysis of REE in both apatite and basalt. This calibration is defined by ( Eu E u * ) D lattice strain = 1 1 + 10 - 0.20 ± 0.03 × l o g ⁡ ( f o 2 ) - 3.03 ± 0.42 . The Eu valence-state partitioning techniques based on (Sm×Gd) and lattice strain are virtually indistinguishable, such that either methodology is valid. Application of any of these calibrations is best carried out in systems where both apatite and coexisting glass are present and in direct contact with one another. In holocrystalline rocks, whole rock analyses can be used as a guide to melt composition, but considerations and corrections must be made to either the lattice strain or Sm×Gd techniques to ensure that the effect of plagioclase crystallization either prior to or during apatite growth can be removed. Similarly, if the melt source has an inherited either a positive or negative Eu anomaly, appropriate corrections must also be made to lattice strain or Sm×Gd techniques that are based on whole rock analyses. This being the case, if apatite is primary and saturates from the parent melt early during the crystallization sequence, these corrections may be minimal. The partition coefficients for the REE between apatite and melt range from a maximum DEu3+ = 1.67 ± 0.25 (as determined by lattice strain) to DLu3+ = 0.69 ± 0.10. The REE partition coefficient pattern, as observed in the Onuma diagram, is in a fortuitous situation where the most compatible REE (Eu3+) is also the polyvalent element used to monitor fO2. These experiments provide a quantitative means of assessing Eu anomalies in apatite and how they be used to constrain the oxygen fugacity of silicate melts. 
    more » « less
  3. ; ; ; (, Chemical Geology)
    Rare earth elements (REE) are critical elements found in monazite, xenotime, and hydrated REE phosphates which typically form in hydrothermal mineral deposits. Accurate predictions of the solubility of these REE phosphates and the speciation of REE in aqueous fluids are both key to understanding the controls on the transport, fractionation, and deposition of REE in natural systems. Previous monazite and xenotime solubility experiments indicate the presence of large discrepancies between experimentally derived solubility constants versus calculated solubilities by combining different data sources for the thermodynamic properties of minerals and aqueous species at hydrothermal conditions. In this study, these discrepancies were resolved by using the program GEMSFITS to optimize the standard partial molal Gibbs energy of formation (ΔfG°298) of REE aqueous species (REE3+ and REE hydroxyl complexes) at 298.15 K and 1 bar while keeping the thermodynamic properties fixed for the REE phosphates. A comprehensive experimental database was compiled using solubility data available between 25 and 300 °C. The latter permits conducting thermodynamic parameter optimization of ΔfG°298 for REE aqueous species. Optimal matching of the rhabdophane solubility data between 25 and 100 °C requires modifying the ΔfG°298 values of REE3+ by 1–6 kJ/mol, whereas matching of the monazite solubility data between 100 and 300 °C requires modifying the ΔfG°298 values of both REE3+ and REEOH2+ by ∼ 2–10 kJ/mol and ∼ 15–31 kJ/mol, respectively. For xenotime, adjustments of ΔfG°298 values by 1–26 kJ/mol are only necessary for the REE3+ species. The optimizations indicate that the solubility of monazite in acidic solutions is controlled by the light (L)REE3+ species at <150 °C and the LREEOH2+ species at >150 °C, whereas the solubility of xenotime is controlled by the heavy (H)REE3+ species between 25 and 300 °C. Based on the optimization results, we conclude that the revised Helgeson-Kirkham-Flowers equation of state does not reliably predict the thermodynamic properties of REE3+, REEOH2+, and likely other REE hydroxyl species at hydrothermal conditions. We therefore provide an experimental database (ThermoExp_REE) as a basic framework for future updates, extensions with other ligands, and optimizations as new experimental REE data become available. The optimized thermodynamic properties of aqueous species and minerals are available open access to accurately predict the solubility of REE phosphates in fluid-rock systems. 
    more » « less
  4. ; ; ; ; ; ; (, Journal of Materials Chemistry A)
    Na-ion conducting solid electrolytes can enable both the enhanced safety profile of all-solid-state-batteries and the transition to an earth-abundant charge-carrier for large-scale stationary storage. In this work, we developed new perovskite-structured Na-ion conductors from the analogous fast Li-ion conducting Li 3 x La 2/3− x TiO 3 (LLTO), testing strategies of chemo-mechanical and defect engineering. Na x La 2/3−1/3 x ZrO 3 (NLZ) and Na x La 1/3−1/3 x Ba 0.5 ZrO 3 (NLBZ) were prepared using a modified Pechini method with varying initial stoichiometries and sintering temperatures. With the substitution of larger framework cations Zr 4+ and Ba 2+ on B- and A-sites respectively, NLZ and NLBZ both had larger lattice parameters compared to LLTO, in order to accommodate and potentially enhance the transport of larger Na ions. Additionally, we sought to introduce Na vacancies through (a) sub-stoichiometric Na : La ratios, (b) Na loss during sintering, and (c) donor doping with Nb. AC impedance spectroscopy and DC polarization experiments were performed on both Na 0.5 La 0.5 ZrO 3 and Na 0.25 La 0.25 Ba 0.5 ZrO 3 in controlled gas environments (variable oxygen partial pressure, humidity) at elevated temperatures to quantify the contributions of various possible charge carriers (sodium ions, holes, electrons, oxygen ions, protons). Our results showed that the lattice-enlarged NLZ and NLBZ exhibited ∼19× (conventional sintering)/49× (spark plasma sintering) and ∼7× higher Na-ion conductivities, respectively, compared to unexpanded Na 0.42 La 0.525 TiO 3 . Moreover, the Na-ion conductivity of Na 0.5 La 0.5 ZrO 3 is comparable with that of NaNbO 3 , despite having half the carrier concentration. Additionally, more than 96% of the total conductivity in dry conditions was contributed by sodium ions for both compositions, with negligible electronic conductivity and little oxygen ion conductivity. We also identified factors that limited Na-ion transport: NLZ and NLBZ were both challenging to densify using conventional sintering without the loss of Na because of its volatility. With spark plasma sintering, higher density can be achieved. In addition, the NLZ perovskite phase appeared unable to accommodate significant Na deficiency, whereas NLBZ allowed some. Density functional theory calculations supported a thermodynamic limitation to creation of Na-deficient NLZ in favor of a pyrochlore-type phase. Humid environments generated different behavior: in Na 0.25 La 0.25 Ba 0.5 ZrO 3 , incorporated protons raised total conductivity, whereas in Na 0.5 La 0.5 ZrO 3 , they lowered total conductivity. Ultimately, this systematic approach revealed both effective approaches and limitations to achieving super-ionic Na-ion conductivity, which may eventually be overcome through alternative processing routes. 
    more » « less
  5. ; ; ; ; (, New Mexico Geological Society)
    The Lemitar Mountains carbonatite (Fig. 1A) is a 515 Ma rare earth element (REE) mineral deposit in New Mexico comprising over one hundred carbonatite dikes intruded into Proterozoic igneous rocks [1, 2]. The carbonatite displays grades of up to 1.1 % total REE and showcases variable degrees of hydrothermal autometasomatism and overprinting of the surrounding host rocks through fenitization and veining [1-3]. In this study, we employ a combination of petrography, optical cold-cathode cathodoluminescence and scanning electron microscopy to delineate the mineral paragenesis of the carbonatites and the associated crosscutting hydrothermal veins (Fig. 1). The determination of trace element concentrations in apatite was achieved using LA-ICP-MS. Fluid inclusions were studied in thick sections using optical microscopy, microthermometry and a confocal Raman spectroscopy to assess their salinity, homogenization temperature, and chemical composition. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email