An official website of the United States government
Abstract Manufacturing of ceramics is challenging due to their low toughness and high hardness. Additive Manufacturing (AM) has been explored to create complex ceramic structures, but current techniques face a tradeoff between precisely controlled feature sizes and high shrinkage at the microscales. Here, we introduce 3D‐AJP, a novel freeform ceramic fabrication method that enables highly complex microscale 3D ceramic architectures—such as micropillars, spirals, and lattices—with minimal shrinkage and no auxiliary support. Using a near‐binder‐free nanoparticle ink in an Aerosol Jet (AJ) 3D printer, our approach precisely controls feature sizes down to 20 µm with aspect ratios up to 30:1. The resulting structures exhibit exceptionally low linear shrinkage of 2‐6% upon sintering, spanning five orders of magnitude in length scale. Bi‐material 3D architectures (zinc oxide/zirconia, zinc oxide/titania, titania/zirconia) and hybrid ceramics further demonstrate the technique’s versatility. We showcase two key applications. First, 3D ceramic photocatalysts improve water purification performance, achieving a 400% increase in photocatalytic efficiency compared to bulk ceramics. Second, we develop a highly sensitive Her2 biomarker sensor for breast cancer detection, achieving a 22‐second response time and a record‐low detection limit of 0.0193 fm. Our technique will lead to high‐performance sensing, filtration, microelectronics packaging, catalysis, and tissue regeneration technologies.
more »
« less
Development of Additively Manufactured Embedded Ceramic Temperature Sensors via Vat Photopolymerization
Current additive manufacturing (AM) techniques and methods, such as liquid-crystal display (LCD) vat photopolymerization, offer a wide variety of surface-sensing solutions, but customizable internal sensing is both scarce in presence and narrow in scope. In this work, a fabrication process for novel customizable embedded ceramic temperature sensors is investigated. The fabrication techniques and materials are evaluated, followed by extensive characterization via spectral analysis and thermomechanical testing. The findings indicate that LCD-manufactured ceramic sensors exhibit promising sensing properties, including strong linear thermal sensitivity of 0.23% per °C, with an R2 of at least 0.97, and mechanical strength, with a hardness of 570 HV, making them suitable for adverse environmental conditions. This research not only advances the field of AM for sensor development but also highlights the potential of LCD technology in rapidly producing reliable and efficient ceramic temperature sensors.
more »
« less
- Award ID(s):
- 2229155
- PAR ID:
- 10567145
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Crystals
- Volume:
- 14
- Issue:
- 11
- ISSN:
- 2073-4352
- Page Range / eLocation ID:
- 936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The demand for the capacitive sensor has attracted substantial attention in monitoring pressure due to its distinctive design and passive nature with versatile sensing capability. The effectiveness of the capacitive sensor primarily relies on the variation in thickness of the dielectric layer sandwiched between conductive electrodes. Additive manufacturing (AM), a set of advanced fabrication techniques, enables the production of functional electronic devices in a single-step process. Particularly, the 3D printing approach based on photocuring is a tailorable process in which the resin consists of multiple components that deliver essential mechanical qualities with enhanced sensitivity towards targeted measurements. However, the availability of photocurable resin exhibiting essential flexibility and dielectric properties for the UV-curing production process is limited. The necessity of a highly stable and sensitive capacitive sensor demands a photocurable polymer resin with a higher dielectric constant and conductive electrodes. The primary purpose of this study is to design and fabricate a capacitive device composed of novel photocurable Polyvinylidene fluoride (PVDF) resin utilizing an LCD process exhibiting higher resolution with electrodes embedded inside the substrate. The embedded electrode channels in PVDF substrate are filled with conductive silver paste by an injection process. The additively manufactured sensor provides pressure information by means of a change in capacitance of the dielectric material between the electrodes. X-Ray based micro CT-Scan ex-situ analysis is performed to visualize the capacitance based sensor filled with conductive electrodes. The sensor is tested to measure capacitance response with changes in pressure as a function of time that are utilized for sensitivity analysis. This work represents a significant achievement of AM integration in developing efficient and robust capacitive sensors for pressure monitoring or wearable electronic applications.more » « less
-
Significant progress into the development and use of stretchable sensors for structural health monitoring (SHM) has been made in the last several years. The fusion of stretchable, adaptable sensing materials with highly specialized additive manufacturing techniques allows for the development of highly adaptive, customizable, and easily accessible sensing solutions. However, a significant portion of these works explore SHM topics at a macro level, and with a reduced focus on implementation. As such, little application or experimentation into practical sensing elements, especially those at the micro scale, have followed the advances in sensing technology. In this work, we demonstrate the application of recent developments in stretchable electronics, alongside multiple advanced additive manufacturing processes, to develop a novel flexible microscale sensor. A complex sensor is designed and printed utilizing Digital Light Processing (DLP) to directly fabricate the structure. The printed sensor is then filled with a piezoresistive sensing element of either PEDOT:PSS or carbon-based PDMS (cPDMS), which provided strain readings via resistance change. After being filled with a sensing mixture, the sensor is shown to operate as desired under large deformations. Additionally, the sensor is shown to work effectively when embedded into a separate additively manufactured part. A flexible test coupon is manufactured using the DLP AM process, and a microsensor is embedded inside the coupon structure. This sensing systems is tested in both tension and bending. These results show the feasibility of implementing both modern day AM processes and into current structural health monitoring developments into practical applications.more » « less
-
Abstract 3D conformable electronic devices on freeform surfaces show superior performance to the conventional, planar ones. They represent a trend of future electronics and have witnessed exponential growth in various applications. However, their potential is largely limited by a lack of sophisticated fabrication techniques. To tackle this challenge, a new direct freeform laser (DFL) fabrication method enabled by a 5‐axis laser processing platform for directly fabricating 3D conformable electronics on targeted arbitrary surfaces is reported. Accordingly, representative laser‐induced graphene (LIG), metals, and metal oxides are successfully fabricated as high‐performance sensing and electrode materials from different material precursors on various types of substrates for applications in temperature/light/gas sensing, energy storage, and printed circuit board for circuit. Last but not the least, to demonstrate an application in smart homes, LIG‐based conformable strain sensors are fabricated and distributed in designated locations of an artificial tree. The distributed sensors have the capability of monitoring the wind speed and direction with the assistance of well‐trained machine‐learning models. This novel process will pave a new and general route to fabricating 3D conformable electronic devices, thus creating new opportunities in robotics, biomedical sensing, structural health, environmental monitoring, and Internet of Things applications.more » « less
-
The integration of 3D printed sensors into hosting structures has become a growing area of research due to simplified assembly procedures, reduced system complexity, and lower fabrication cost. Embedding 3D printed sensors into structures or bonding the sensors on surfaces are the two techniques for the integration of sensors. This review extensively discusses the fabrication of sensors through different additive manufacturing techniques. Various additive manufacturing techniques dedicated to manufacture sensors as well as their integration techniques during the manufacturing process will be discussed. This review will also discuss the basic sensing mechanisms of integrated sensors and their applications. It has been proven that integrating 3D printed sensors into infrastructures can open new possibilities for research and development in additive manufacturing and sensor materials for smart goods and the Internet of Things.more » « less
