More Like this

1. From the ashes of VEI: Decoding explosivity, mass eruption rate and hazards in real time

   https://doi.org/10.22541/essoar.176967627.71453176/v1  

   Sahagian, Dork (January 2026, AGU)

   Ash-producing volcanic eruptions are a major natural hazard. The explosivity of these eruptions has been described for decades by a semi-quantitative “Volcanic Explosivity Index (VEI)” based on a number of interdependent factors (eruption duration, volume of ejected material, eruptive column height, tropospheric and stratospheric injection, and many qualitative descriptors), most of which could only be assessed after eruption had ceased. The utility of this semi-quantitative index has been questioned since then, yet its common usage persists. We suggest that if VEI is to be used in the future, it may as well be an index that can be determined in real time during an eruption, and one that strictly reflects eruption intensity. We find that the same value for the “traditional” Volcanic Explosivity Index of past eruptions can be estimated in real time during an eruption, based solely on eruption column height. This approach is not intended to replace the traditional VEI scale or supplant more detailed mechanistic approaches to mass eruption rate (MER); rather it can be used to provide a more immediate way of calculating the VEI and linking to MER, in real time while an eruption is taking place. As such, if the easily observed height can be measured, both MER and VEI can be estimated. This may facilitate emergency response by aviation, hazard management, and others to mitigate societal impact of hazardous eruptions. This scheme can be inverted to use volume-based VEI of ancient eruptions to roughly retrodict unobserved column height for key historic and pre-historic eruptions. Further, ash particle morphology reflects explosivity in terms of decompression rate at the vent of unobserved eruptions. With sufficiently rapid decompression, this could result in an observable bi-modal bubble size distribution. The morphology of ash particles reveals a threshold between VEI 3 and 4, above which there is sufficiently rapid decompression to trigger a second nucleation event near the vent. 

   more » « less
2. Advances in Selected Heterocyclization Methods

   https://doi.org/10.1055/s-0042-1751429  

   Rivas, Mónica; Gevorgyan, Vladimir (July 2023, Synlett)

   Abstract This Account summarizes efforts in our group toward synthesis of heterocycles in the past decade. Selected examples of transannulative heterocyclizations, intermediate construction of reactive compounds en route to these important motifs, and newer developments of a radical approach are outlined. 1 Introduction 2 Transannulative Heterocyclization 2.1 Rhodium-Catalyzed Transannulative Heterocyclization 2.2 Copper-Catalyzed Transannulative Heterocyclization 3 Synthesis of Heterocycles from Reactive Precursors 3.1 Synthesis of Heterocycles from Diazo Compounds 3.2 Synthesis of Heterocycles from Alkynones 4 Radical Heterocyclization 4.1 Light-Induced Radical Heterocyclization 4.2 Light-Free Radical Heterocyclization 7 Conclusion 

   more » « less
3. Choosing your own adventure: Engaging the new learning society through integrative curriculum design

   https://doi.org/10.29007/567f  

   Ryder, Elizabeth; Ruiz, Carolina; Weaver, Shari; Gegear, Robert (February 2020, EPiC Series in Education Science)

   In our increasingly data-driven society, it is critical for high school students to learn to integrate computational thinking with other disciplines in solving real world problems. To address this need for the life sciences in particular, we have developed the Bio-CS Bridge, a modular computational system coupled with curriculum integrating biology and computer science. Our transdisciplinary team comprises university and high school faculty and students with expertise in biology, computer science, and education. Our approach engages students and teachers in scientific practices using biological data that they can collect themselves, and computational tools that they help to design and implement, to address the real-world problem of pollinator decline. Our modular approach to high school curriculum design provides teachers with the educational flexibility to address national and statewide biology and computer science standards for a wide range of learner types. We are using a teacher- leader model to disseminate the Bio-CS Bridge, whose components will be freely available online. 

   more » « less
4. Automatically Reproducing Timing-Dependent Flaky-Test Failures

   https://doi.org/10.5281/zenodo.7041599  

   Shanto Rahman, Aaron Massey (January 2023, Zenodo)

   This artifact contains the source code for FlakeRake, a tool for automatically reproducing timing-dependent flaky-test failures. It also includes raw and processed results produced in the evaluation of FlakeRake   Contents:   Timing-related APIs that FlakeRake considers adding sleeps at: timing-related-apis Anonymized code for FlakeRake (not runnable in its anonymized state, but included for reference; we will publicly release the non-anonymized code under an open source license pending double-blind review): flakerake.tgz Failure messages extracted from the FlakeFlagger dataset: 10k_reruns_failures_by_test.csv.gz  Output from running isolated reruns on each flaky test in the FlakeFlager dataset: 10k_isolated_reruns_all_results.csv.gz (all test results summarized into a CSV), 10k_isolated_reruns_failures_by_test.csv.gz (CSV including just test failures, including failure messages), 10k_isolated_reruns_raw_results.tgz (includes all raw results from reruns, including the XML files output by maven) Output from running the FlakeFlagger replication study (non-isolated 10k reruns):flakeFlaggerReplResults.csv.gz (all test results summarized into a CSV), 10k_reruns_failures_by_test.csv.gz (CSV including just failures, including failure messages), flakeFlaggerRepl_raw_results.tgz (includes all raw results from reruns, including the XML files output by maven - this file is markedly larger than the 10k isolated reruns results because we ran *all* tests in this experiment, whereas the 10k isolated rerun experiment only re-ran the tests that were known to be flaky from the FlakeFlagger dataset). Output from running FlakeRake on each flaky test in the FlakeFlagger dataset: For bisection mode: results-bis.tgz For one-by-one mode: results-obo.tgz Scripts used to execute FlakeRake using an HPC cluster: execution-scripts.tgz Scripts used to execute rerun experiments using an HPC cluster: flakeFlaggerReplScripts.tgz Scripts used to parse the "raw" maven test result XML files in this artifact into the CSV files contained in this artifact: parseSurefireXMLs.tgz  Output from running FlakeRake in “reproduction” mode, attempting to reproduce each of the failures that matched the FlakeFlagger dataset (collected for bisection mode only): results-repro-bis.tgz Analysis of timing-dependent API calls in the failure inducing configurations that matched FlakeFlagger failures: bis-sleepyline.cause-to-matched-fail-configs-found.csv 

   more » « less
5. High species richness in the lichen genus Peltigera (Ascomycota, Lecanoromycetes): 34 species in the dolichorhizoid and scabrosoid clades of section Polydactylon, including 24 new to science

   https://doi.org/10.3767/persoonia.2023.51.01  

   Magain, N.; Miadlikowska, J.; Goffinet, B.; Goward, T.; Pardo-De la Hoz, C.J.; Jüriado, I.; Simon, A.; Mercado-Díaz, J.A.; Barlow, T.; Moncada, B.; et al (August 2023, Persoonia - Molecular Phylogeny and Evolution of Fungi)

   Applying molecular methods to fungi establishing lichenized associations with green algae or cyanobacteria has repeatedly revealed the existence of numerous phylogenetic taxa overlooked by classical taxonomic approaches. Here, we report taxonomical conclusions based on multiple species delimitation and validation analyses performed on an eight-locus dataset that includes world-wide representatives of the dolichorhizoid and scabrosoid clades in section Polydactylon of the genus Peltigera . Following the recommendations resulting from a consensus species delimitation approach and additional species validation analysis (BPP) performed in this study, we present a total of 25 species in the dolichorhizoid clade and nine in the scabrosoid clade, including respectively 18 and six species that are new to science and formally described. Additionally, one combination and three varieties (including two new to science) are proposed in the dolichorhizoid clade. The following 24 new species are described: P. appalachiensis , P. asiatica , P. borealis , P. borinquensis , P. chabanenkoae , P. clathrata , P. elixii , P. esslingeri , P. flabellae , P. gallowayi , P. hawaiiensis , P. holtanhartwigii , P. itatiaiae , P. hokkaidoensis , P. kukwae , P. massonii , P. mikado , P. nigriventris , P. orientalis , P. rangiferina , P. sipmanii , P. stanleyensis , P. vitikainenii and P. willdenowii ; the following new varieties are introduced: P. kukwae var. phyllidiata and P. truculenta var. austroscabrosa ; and the following new combination is introduced: P. hymenina var. dissecta . Each species from the dolichorhizoid and scabrosoid clades is morphologically and chemically described, illustrated, and characterised with ITS sequences. Identification keys are provided for the main biogeographic regions where species from the two clades occur. Morphological and chemical characters that are commonly used for species identification in the genus Peltigera cannot be applied to unambiguously recognise most molecularly circumscribed species, due to high variation of thalli formed by individuals within a fungal species, including the presence of distinct morphs in some cases, or low interspecific variation in others. The four commonly recognised morphospecies: P. dolichorhiza , P. neopolydactyla , P. pulverulenta and P. scabrosa in the dolichorhizoid and scabrosoid clades represent species complexes spread across multiple and often phylogenetically distantly related lineages. Geographic origin of specimens is often helpful for species recognition; however, ITS sequences are frequently required for a reliable identification. 

   more » « less