An official website of the United States government
Abstract Air–water interfacial adsorption complicates per‐ and polyfluoroalkyl substance (PFAS) transport in vadose zones. Air–water interfaces can arise from pendular rings between soil grains and thin water films on grain surfaces, the latter of which account for over 90% of the total air–water interfaces for most field‐relevant conditions. However, whether all thin‐water‐film air–water interfaces are accessible by PFAS and how mass‐transfer limitations in thin water films control PFAS transport in soils remain unknown. We develop a pore‐scale model that represents both PFAS adsorption at bulk capillary and thin‐water‐film air–water interfaces and the mass‐transfer processes between bulk capillary water and thin water films (including advection, aqueous diffusion, and surface diffusion along air–water interfaces). We apply the pore‐scale model to a series of numerical experiments—constrained by experimentally determined hydraulic parameters and air–water interfacial area data sets—to examine the impact of thin‐water‐film mass‐transfer limitations in a sand medium. Our analyses suggest: (a) The mass‐transfer limitations between bulk capillary water and thin water films inside a pore are negligible due to surface diffusion. (b) However, strong mass‐transfer limitations arise in thin water films of pore clusters where pendular rings disconnect. The mass‐transfer limitations lead to early arrival and long tailing behaviors even if surface diffusion is present. (c) Despite the mass‐transfer limitations, all air–water interfaces in the thin water films were accessed by PFAS under the simulated conditions. These findings highlight the importance of incorporating the thin‐water‐film mass‐transfer limitations and surface diffusion for modeling PFAS transport in vadose zones.
more »
« less
Anomalous Adsorption of PFAS at the Thin‐Water‐Film Air‐Water Interface in Water‐Unsaturated Porous Media
Abstract Per‐ and poly‐fluoroalkyl substances (PFAS) are interfacially‐active contaminants that adsorb at air‐water interfaces (AWIs). Water‐unsaturated soils have abundant AWIs, which generally consist of two types: one is associated with the pendular rings of water between soil grains (i.e., bulk AWI) and the other arises from the thin water films covering the soil grains. To date, the two types of AWIs have been treated the same when modeling PFAS retention in vadose zones. However, the presence of electrical double layers of soil grain surfaces and the subsequently modified chemical potential of PFAS at the AWI may significantly change the PFAS adsorption at the thin‐water‐film AWI relative to that at the bulk AWI. Given that thin water films contribute to over 90% of AWIs in the vadose zone under many field‐relevant wetting conditions, it is critical to quantify the potential anomalous adsorption of PFAS at the thin‐water‐film AWI. We develop a thermodynamic‐based mathematical model to quantify this anomalous adsorption. The model couples the chemical equilibrium of PFAS with the Poisson‐Boltzmann equation that governs the distribution of electrical potential in a thin water film. Our model analyses suggest that PFAS adsorption at thin‐water‐film AWI can deviate significantly (up to 82%) from that at bulk AWIs. The deviation increases for lower porewater ionic strength, thinner water film, and higher soil grain surface charge. These results highlight the importance of accounting for the anomalous adsorption of PFAS at the thin‐water‐film AWI when modeling PFAS fate and transport in the vadose zone.
more »
« less
- Award ID(s):
- 2237015
- PAR ID:
- 10577049
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Water Resources Research
- Volume:
- 60
- Issue:
- 3
- ISSN:
- 0043-1397
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Per- and polyfluoroalkyl substances (PFAS) are surface-active contaminants, which are detected in groundwater globally, presenting serious health concerns. The vadose zone and surface water are recognized as primary sources of PFAS contamination. Previous studies have explored PFAS transport and retention mechanisms in the vadose zone, revealing that adsorption at interfaces and soil/sediment heterogeneity significantly influences PFAS retention. However, our understanding of how surface water−groundwater interactions along river corridors impact PFAS transport remains limited. To analyze PFAS transport during surface water−groundwater interactions, we performed saturated−unsaturated flow and reactive transport simulations in heterogeneous riparian sediments. Incorporating uncertainty quantification and sensitivity analysis, we identified key physical and geochemical sediment properties influencing PFAS transport. Our models considered aqueous-phase transport and adsorption both at the air−water interface (AWI) and the solid-phase surface. We tested different cases of heterogeneous sediments with varying volume proportions of higher permeability sediments, conducting 2000 simulations for each case, followed by global sensitivity and response surface analyses. Results indicate that sediment porosities, which are correlated to permeabilities, are crucial for PFAS transport in riparian sediments during river stage fluctuations. High-permeable sediment (e.g., sandy gravel, sand) is the preferential path for the PFAS transport, and low-permeable sediment (e.g., silt, clay) is where PFAS is retained. Additionally, the results show that adsorption at interfaces (AWI and solid phase) has a small impact on PFAS retention in riparian environments. This study offers insights into factors influencing PFAS transport in riparian sediments, potentially aiding the development of strategies to reduce the risk of PFAS contamination in groundwater from surface water.more » « less
-
Abstract Per‐ and polyfluoroalkyl substances (PFAS) are surface‐active contaminants experiencing strong retention in vadose zones due to adsorption at air–water and solid–water interfaces. Leaching of PFAS through vadose zones poses great risks of groundwater contamination. Prior PFAS transport studies have focused on homogenous or layered vadose zones that significantly underrepresented the impact of preferential flow caused by soil heterogeneities—a primary factor known to dominantly control the subsurface transport of many contaminants. We conduct numerical simulations to investigate the impact of preferential flow on PFAS leaching in stochastically generated heterogeneous vadose zones. The simulations show that while shorter‐chain PFAS experience accelerated leaching similar to non‐surfactant solutes, the accelerated leaching of more surface‐active longer‐chain PFAS is uniquely amplified by 1.1–4.5 times due to reduced accessible air–water interfacial areas along preferential flow pathways. Our study highlights the criticality of characterizing soil heterogeneities for accurately predicting the leaching of long‐chain PFAS in vadose zones.more » « less
-
The nanoscale electrical and mechanical properties in the CdTe thin films solar cells were investigated using the scanning probe microscopy. The comparative localized electrical and mechanical properties between as-grown and CdCl2 treated CdTe thin films for the grain and grain boundaries were studied using the conductive atomic force microscopy (cAFM) and force modulation microscopy (FMM). An increased electrical behavior and decreased elastic stiffness in the CdCl2 treated thin films were recorded to elucidate the impact from the grain growth of CdTe grains. On applying a simulated working electrical bias into the CdTe thin-film solar cells, the electric field across the CdTe film can increase the softness of CdTe thin film. The results imply the presence of a potential mechanical failure site in the CdTe grain boundary, which may lead to device degradation.more » « less
-
Abstract Air–water interfacial adsorption represents a major source of retention for many per‐ and poly‐fluoroalkyl substances (PFAS). Therefore, transient hydrological fluxes that dynamically change the amount of air–water interfaces are expected to strongly influence PFAS retention in their source zones in the vadose zone. We employ mathematical modeling to study how seasonal groundwater table (GWT) fluctuations affect PFAS source‐zone leaching. The results suggest that, by periodically collapsing air–water interfaces, seasonal GWT fluctuations can lead to strong temporal variations in groundwater concentration and significantly enhance PFAS leaching in the vadose zone. The enhanced leaching is more pronounced for longer‐chain PFAS, coarser‐textured porous media, drier climates, and greater amplitudes of fluctuations. GWT fluctuations and lateral migration above the GWT introduce a downgradient persistent secondary source zone for longer‐chain PFAS. However, the enhanced leaching and the secondary source zone are greatly reduced when subsurface heterogeneity is present. In highly heterogeneous source zones, GWT fluctuations may even lead to overall slower leaching due to lateral flow (in the GWT fluctuation zone and above the GWT) moving PFAS into local regions with greater retention capacities. Model simplification analyses suggest that the enhanced source‐zone leaching due to GWT fluctuations may be approximated using a static but shallower GWT. Additionally, while vertical 1D models underestimate source‐zone leaching due to not representing lateral migration, they can be revised to account for lateral migration and provide lower‐ and upper‐bound estimates of PFAS source‐zone leaching under GWT fluctuations. Overall, our study suggests that representing GWT fluctuations is critical for quantifying source‐zone leaching of PFAS, especially the more interfacially active longer‐chain compounds.more » « less
