An official website of the United States government
Abstract Age-progressive seamount tracks generated by lithospheric motion over a stationary mantle plume have long been used to reconstruct absolute plate motion (APM) models. However, the basis of these models requires the plumes to move significantly slower than the overriding lithosphere. When a plume interacts with a convergent or divergent plate boundary, it is often deflected within the strong local mantle flow fields associated with such regimes. Here, we examined the age progression and geometry of the Samoa hotspot track, focusing on lava flow samples dredged from the deep flanks of seamounts in order to best reconstruct when a given seamount was overlying the mantle plume (i.e., during the shield-building stage). The Samoan seamounts display an apparent local plate velocity of 7.8 cm/yr from 0 to 9 Ma, 11.1 cm/yr from 9 to 14 Ma, and 5.6 cm/yr from 14 to 24 Ma. Current fixed and mobile hotspot Pacific APM models cannot reproduce the geometry of the Samoa seamount track if a long-term fixed hotspot location, currently beneath the active Vailulu’u Seamount, is assumed. Rather, reconstruction of the eruptive locations of the Samoan seamounts using APM models indicates that the surface expression of the plume migrated ~2° northward in the Pliocene. Large-scale mantle flow beneath the Pacific Ocean Basin cannot explain this plume migration. Instead, the best explanation is that toroidal flow fields—generated by westward migration of the Tonga Trench and associated slab rollback—have deflected the conduit northward over the past 2–3 m.y. These observations provide novel constraints on the ways in which plume-trench interactions can alter hotspot track geometries.
more »
« less
Geodynamic Evolution of the Lau Basin
Abstract The formation of Lau Basin records an extreme event of plate tectonics, with the associated Tonga trench exhibiting the fastest retreat in the world (16 cm/yr). Yet paleogeographic reconstructions suggest that seafloor spreading in the Lau Basin only initiated around 6 Ma. This kinematics is difficult to reconcile with our present understanding of how subduction drives plate motions. Using numerical models, we propose that eastward migration of the Lau Ridge concurrent with trench retreat explains both the narrow width and thickened crust of the Lau Basin. To match the slab geometry and basin width along the Tonga‐Kermadec trench, our models suggest that fast trench retreat rate of 16 cm/yr might start ~15 Ma. Tonga slab rollback induced vigorous mantle flow underneath the South Fiji Basin which is driving the extension and thinning of the basin and contributing to its observed deeper bathymetry compared to neighboring basins.
more »
« less
- Award ID(s):
- 1928970
- PAR ID:
- 10578995
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 51
- Issue:
- 15
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The Tonga‐Kermadec subduction zone exhibits the fastest observed trench retreat and convergence near its northern end. However, a paradox exists: despite the rapid trench retreat, the Tonga slab maintains a relatively steep dip angle above 400 km depth. The slab turns flat around 400 km, then steepening again until encountering a stagnant segment near 670 km. Despite its significance for understanding slab dynamics, no existing numerical model has successfully demonstrated how such a distinct slab morphology can be generated under the fast convergence. Here we run subduction models that successfully reproduce the slab geometries while incorporating the observed subduction rate. We use a hybrid velocity boundary condition, imposing velocities on the arc and subducting plate while allowing the overriding plate to respond freely. This approach is crucial for achieving a good match between the modeled and observed Tonga slab. The results explain how the detailed slab structure is highly sensitive to physical parameters including the seafloor age and the mantle viscosity. Notably, a nonlinear rheology, where dislocation creep reduces upper mantle viscosity under strong mantle flow, is essential. The weakened upper mantle allows for a faster slab sinking rate, which explains the large dip angle. Our findings highlight the utilizing rheological parameters that lead to extreme viscosity variations within numerical models to achieve an accurate representation of complex subduction systems like the Tonga‐Kermadec zone. Our study opens new avenues for further study of ocean‐ocean subduction systems, advancing our understanding of their role in shaping regional and global tectonics.more » « less
-
null (Ed.)Abstract The subducted old and cold Pacific Plate beneath the young Philippine Sea Plate at the Izu‐Bonin trench over the Cenozoic hosts regional deep earthquakes. We investigate slab morphology and stress regimes under different trench motion histories with mantle convection models. Viscosity, temperature, and deviatoric stress are inherently heterogeneous within the slab, which we link to the occurrence of isolated earthquakes. Models expand on previous suggestions that observed slab morphology variations along the Izu‐Bonin subduction zone, exhibited as shallow slab dip angles in the north and steeper dip angles in the south, are mainly due to variations in the rate of trench retreat from the north (where it is fast) to the south (where it is slow). Geodynamic models consistent with the regional plate tectonics, including oceanic plate age, plate convergence rate, and trench motion history, reproduce the seismologically observed principal stress direction and slab morphology. We suggest that the isolated ~680 km deep, 30 May 2015 Mw 7.9 Bonin Islands earthquake, which lies east of the well‐defined Benioff zone and has its principal compressional stress direction oriented toward the tip of the previously defined Benioff zone, can be explained by Pacific slab buckling in response to the slow trench retreat.more » « less
-
Within the last two-million years, subduction has initiated at the southern end of the New Hebrides trench along the ~E-W trending Matthew-Hunter section of the trench (Patriat et al., 2015; 2019). This part of the subduction system originated as a subduction-transform edge propagator (STEP) fault, a transcurrent plate boundary that terminates Australian plate subduction at the southern end of the New Hebrides trench at a slab tear and allows its rapid southwestward rollback (Govers and Wortel, 2005). The down warped torn lithospheric edge of the STEP fault dips northward in the same direction as the absolute plate motion of the Australian plate in a hotspot reference frame. This creates a strong southward mantle flow (~55 km/Myr) against the already failed and weak northward dipping STEP fault, promoting further down bending and subduction. Through this mechanism, subduction and southward rollback of the STEP fault edge has begun, initiating a subduction zone in an extensional stress regime without requiring initial convergence between the Australian plate and the North Fiji Basin. In fact, the North Fiji Basin is in extension, forming rifts and spreading centers and volcanically accreting crust unusually close to the Matthew-Hunter trench. Subduction initiation at the Matthew-Hunter trench has effectively terminated the STEP fault and slab tear, so that subduction now takes place continuously around the corner from the New Hebrides to the Matthew-Hunter section of the trench. This model proposes that STEP faults are favorable tectonic boundaries for subduction initiation, provided that mantle flow induced by absolute plate motion is oriented correctly, as shown by the opposing example of the Tonga step fault, which displays no evidence of initiating subduction despite a much larger lithospheric age contrast (Martinez, 2024). Govers, R., and M. J. R. Wortel (2005), Lithosphere tearing at STEP faults: Response to edges of subduction zones, Earth and Planetary Science Letters, 236, 505-523. Martinez, F. (2024), Subduction initiation (or not) due to absolute plate motion at STEP faults: The New Hebrides vs. the Tonga examples, in EGU General Assembly 2024, Vienna, Austria, https://doi.org/10.5194/egusphere-egu24-4189 Patriat, M., et al. (2015), Propagation of back-arc extension into the arc lithosphere in the southern New Hebrides volcanic arc, G-Cubed, 16(9), 3142-3159.Patriat, M., et al. (2019), Subduction initiation terranes exposed at the front of a 2 Ma volcanically-active subduction zone, Earth and Planetary Science Letters, 508, 30-40.more » « less
-
Subduction initiation remains one of the least understood global processes of plate tectonics. Prominent models have been cast in terms of two broad classes: spontaneous cases due to lithospheric gravitational instabilities and induced cases due to forced plate convergence. Yet gravitationally unstable lithosphere is old, strong, and difficult to begin to bend into a subduction zone and convergent forces necessary to begin subduction are often too large given the plates involved. These models also consider the asthenospheric mantle as passive, even though relative motion between slabs and the asthenosphere has long been regarded as a strong control on subduction dynamics. Here I propose that subduction-transform edge propagator (STEP) faults can initiate subduction depending on the absolute motion of the STEP fault with respect to the asthenosphere. STEP faults form where subduction zones end and the subducting plate tears forming a down flexed transcurrent plate boundary at the surface shearing against the adjacent rear arc lithospheric plate. However, STEP faults are not simple transcurrent boundaries. Absolute motion of the down flexed STEP fault edge with respect to the surrounding asthenosphere can produce a strong sea anchor force that either continues to bend the edge downward, initiating subduction, or opposes slab bending, inhibiting subduction. In the south Pacific, the southern end of the New Hebrides Trench and the northern end of the Tonga Trench are type-example STEP faults with opposite senses of dip but both moving northward with respect to the asthenosphere. The northward dipping New Hebrides STEP fault moves northward in a mantle reference frame creating a strong asthenospheric flow against the STEP fault edge, inducing active subduction at the Matthew-Hunter trench. In contrast, the Tonga STEP fault dips southward but also has a northward component of motion with respect to the mantle. Asthenosphere thus flows southward beneath the down flexed Tonga STEP fault edge opposing further bending. Subduction does not initiate at the Tonga STEP fault despite a ~100 Myr age contrast between the Pacific and north Fiji and Lau basin lithospheres. Since absolute plate motions reflect the sum of all forces acting on the entire lithospheric plate, a strong sea anchor mantle force may be generated at a STEP fault edge, initiating subduction (or inhibiting it), even where lithosphere is old, strong, and resists bending and without requiring large convergent forces between plates, overcoming these objections to previous models.more » « less
