An official website of the United States government
Abstract Additive manufacturing (AM), also known as 3D printing, has significantly advanced in recent years, especially with the introduction of multifunctional 3D-printed parts. AM fabricated monolith has multiple material capabilities, thus various functionalities are well-perceived by the manufacturing communities. As an example, a traditional fused filament fabrication (FFF) 3D printer fabricates multi-material thermoplastic parts using a dual extrusion system to increase the functionality of the part including variable stiffening and gradient structures. In addition to the multiple thermoplastic feedstocks in a dual extrusion system, multifunctional AM can be achieved by embedding electronics or reinforcing fibers within the fabricated thermoplastic parts, which significantly impacts the rapid prototyping of hybrid components in manufacturing industries. State-of-the-art techniques such as coextrusion systems, ultrasonic welding tools, and thermal embedding tools have been implemented to automate the process of embedding conductive material within the 3D-printed thermoplastic substrate. The goal of this tool development effort is to embed wires within 3D 3D-printed plastic substrate. This research consisted of developing a wire embedding tool that can be integrated into an FFF desktop 3D printer to deposit conductive as well as resistive wires within the 3D-printed thermoplastic substrate. By realizing the challenges for discrete materials interaction at the interface such as nichrome wires and Acrylonitrile Butadiene Styrene (ABS) plastics and polylactic acid (PLA), the goal of this tool was to immerse wire within ABS and PLA substrate using transient swelling mechanisms under non-polar solvent. A proof-of-concept test stands with a wire feed system and the embedding wheel was first designed and manufactured using 3D printing to examine if a traditional roller-guided system, primarily used for plastic extrusion, would be sufficient for wire extrusion. The development of the integrated wire embedding tool was initiated based on the success of the proof-of-concept wire extrusion system. The design of the integrated wire embedding tool consisted of three sub-assemblies: wire delivery assembly, wire shearing assembly, and swivel assembly. The wire delivery assembly is responsible for feeding the wire towards the thermoplastic using the filament delivery system seen within FFF printers. For the wire shearing mechanism, a cutting Tungsten carbide blade in conjunction with a Nema-17 external stepper motor was used to shear the wire. For the wire embedding assembly, a custom swivel mount was fabricated with a bearing housing for a ball bearing that allowed for a 360-degree motion around the horizontal plane. A wire guide nozzle was placed through the mount to allow for the wire to be fed down into a brass embedding wheel in a tangential manner. Additionally, the solvent reservoir was mounted such that an even layer of solution was dispensed onto the thermoplastic substrate. Through this tool development effort, the aim was to develop technologies that will enable 3D printing of wire-embedded monolith for various applications including a self-heating mold of thermoset-based composite manufacturing as well as smart composites with embedded sensors.
more »
« less
Material Extrusion Additive Manufacturing Molds for Thermoset Composites
In the composite manufacturing industry, production tooling commonly requires preheating for molding. The most commonly used method for preheating is indirect heating, in which heat is transferred from heat sources to the materials by convection and radiation. However, in the case of direct heating, in which heat is generated directly within a material by passing an electric current through it, the tools are preheated through joule heating. In this project, we manufactured a self- heating mold for direct heating. The manufacturing process involves 3D printing self-heating tooling, in which resistive wires are embedded into the tool at every so number of layers using a programmed 3D printer. Thermal characterizations were performed on the self-heating tool and a thermoset composite layup process was performed to study the suitability of the mold.
more »
« less
- Award ID(s):
- 2301925
- PAR ID:
- 10584328
- Publisher / Repository:
- The University of Texas at Austin - Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference
- Date Published:
- Format(s):
- Medium: X
- Right(s):
- open
- Institution:
- Austin, The University Of Texas At
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract: Waste energy harvest using thermoelectric (TE) materials will be a potential solution to the serious environmental pollution and energy shortage problems. Due to limitations of current manufacturing techniques in geometry complexity and high density, TE devices are not widely utilized in daily life to gather waste energy. 3D printing brings an opportunity to solve the fabrication limitations. In this paper, a hybrid process was developed to fabricate thermoelectric materials by integrating hot pressing with stereolithography. The mold and punch were designed and printed to fabricate thermoelectric devices used on hot water tubes via stereolithography. The Sb2Te3 powders filled the 3D printed mold in a layered manner, and each layer of powders was compacted under the pressing of punch at a certain temperature and compressive force. The polymer mold was removed after the sintering process to form the final TE components. A series of experiments were conducted to identify the optimal heating temperature and compressive force. The microstructures morphology and electrical conductivity of fabricated Sb2Te3 samples were evaluated. This research work conducted a scientific investigation into the fabrication of TE material with a hybrid process, including hot pressing and 3D printing, to solve the current manufacturing challenges, providing perspectives on developments of TE devices used in various energy harvest applications.more » « less
-
The ability to fabricate polymer matrix composite materials with continuous or discontinuous filler material, oriented in a user‐specified direction, enables implementing designer material properties, such as anisotropic mechanical, thermal, and electrical properties. Conventional fabrication methods rely on a mold, which limits specimen geometry and is difficult to implement. In contrast, additive manufacturing, including fused filament fabrication or fused deposition modeling, direct ink writing, or stereolithography, combined with a method to align filler material such as a mechanical force or an electric, magnetic, shear force, or ultrasound wave field, enables 3D printing polymer matrix composite material specimens with complex geometry and aligned filler material, without the need for a mold. Herein, we review the combinations of fabrication and filler material alignment methods used to fabricate polymer matrix composite materials, in terms of operating and design parameters including size, resolution, print speed, filler material alignment time, polymer matrix and filler material requirements, and filler manipulation requirements. The operating envelope of each fabrication method is described and their advantages, disadvantages, and limitations are discussed. Finally, different combinations of 3D printing and filler material alignment methods in the context of important engineering applications, such as structural materials, flexible electronics, and shape‐changing materials, are illustrated.more » « less
-
Unlike phononic crystals or systems designed by topology optimization, waveguides designed by shape optimization do not have voids or internal defects, making the fabrication process more suitable for additive manufacturing. By designing a Y‐junction waveguide through shape optimization, an ultrasonic wave can be controlled so that it propagates to a predetermined location just by adjusting its frequency. These demultiplexed ultrasonic waves can be used to transport signals or stimulate nearby materials. As an example, the ultrasonic wave is converted to heat at different locations, which can be applied to mechanisms that can take advantage of heating. First, shape optimization is performed on a cylindrical structure to selectively propagate ultrasonic waves of a particular frequency while attenuating others, which is analyzed through a finite element model. The numerical study results are compared with experimental measurements from samples fabricated through additive manufacturing methods. After verifying the concept, the Y‐junction waveguide is fabricated to demultiplex the wave and selectively heat different locations. The results show that the method of combining shape optimization with additive manufacturing is exceptionally simple and capable of demultiplexing ultrasonic waves, which can replace complex electrical components with single‐material waveguides.more » « less
-
Manoj Gupta (Ed.)Three-dimensional (3D) printing with continuous carbon-fiber-reinforced polymer (C-CFRP) composites is under increasing development, as it offers more versatility than traditional molding processes, such as the out-of-autoclave-vacuum bag only (OOA-VBO) process. However, due to the layer-by-layer deposition of materials, voids can form between the layers and weaken some of the parts’ properties, such as the interlaminar shear strength (ILSS). In this paper, a novel mold-less magnetic compaction force-assisted additive manufacturing (MCFA-AM) method was used to print carbon nanofiber (CNF) z-threaded CFRP (ZT-CFRP) laminates with significantly improved ILSS and reduced void content compared to traditional C-CFRP laminates, which are printed using a no-pressure 3D-printing process (similar to the fused-deposition-modeling process). The radial flow alignment (RFA) and resin-blending techniques were utilized to manufacture a printing-compatible fast-curing ZT-CFRP prepreg tape to act as the feedstock for a MCFA-AM printhead, which was mounted on a robotic arm. In terms of the ILSS, the MCFA-AM method coupled with ZT-CFRP nanomaterial technology significantly outperformed the C-CFRP made with both the traditional no-pressure 3D-printing process and the OOA-VBO molding process. Furthermore, the mold-less MCFA-AM process more than doubled the production speed of the OOA-VBO molding process. This demonstrates that through the integration of new nanomaterials and 3D-printing techniques, a paradigm shift in C-CFRP manufacturing with significantly better performance, versatility, agility, efficiency, and lower cost is achievable.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.26153/tsw/58056
