An official website of the United States government
As herbivorous, diphyodont mammals with relatively low-crowned molars, primates experience changes in dental function during their lifetimes as teeth become progressively worn. Maintaining tooth function with wear is thought to pose a particular challenge for folivorous primates whose diets emphasize molar shearing actions. Recent studies using dental topographic methods suggest that certain primate folivores have molar morphology that maintains or increases functional shearing surfaces with tooth wear (‘dental sculpting’). Evidence for this phenomenon has been found in folivorous but not frugivorous New World monkeys, supporting the hypothesis that dental sculpting is an adaptive trait linked to diet. This analysis extends these methods to two sympatric Old World monkeys from Sabah, Malaysia, possessing distinct diets and dental morphologies: the folivorous colobine Trachypithecus cristatus (n=25) and the more frugivorous cercopithecine Macaca fascicularis (n=22). For each species, 3D shear crest lengths and four dental topographic variables (relief index, slope, angularity, and Dirichlet Normal Energy [DNE]) were measured from variably worn lower second molars. Preliminary results indicate that for any given degree of wear, Trachypithecus has longer shear crest lengths and higher relief, slope, angularity, and DNE than Macaca. The two species exhibit different patterns and degrees of change in topography and shearing crest lengths across the wear series. However, these changes do not always match expectations based on their respective diets. Correlations between 3D shear crest lengths and other dental topographic measurements suggests that the type of metric used to assess shearing potential may affect whether or not dental sculpting is detected.
more »
« less
This content will become publicly available on April 15, 2026
The evolution of facial length and molar proportions in cercopithecid monkeys
IntroductionPapionins are a well-studied and morphologically diverse clade of cercopithecid monkeys. Understanding how craniodental morphology varies in this clade has implications for interpreting taxonomic variation in the fossil record and for our understanding of primate evolution. MethodsWe quantified the phenotypic relationship between facial length and dental proportions in N=314 cercopithecid individuals across 10 species (six papionins, two cercopithecins, and two colobines) using dental ratios MMC (molar module component, ratio of the lengths of the third and first molars) and PMM (premolar-molar module, ratio of the lengths of the second molar and the fourth premolar) and two metrics of facial length: palatal length and prosthion – glabella. ResultsFacial length and molar dental proportions are significantly correlated interspecifically across cercopithecids (PGLS, p<0.01), where species with longer faces have relatively longer maxillary and mandibular third molars. These traits are generally not correlated intraspecifically in the cercopithecids sampled, with some exceptions. DiscussionOur data demonstrate that prognathic faces evolved convergently at least twice in papionins, with parsimony supporting that Papio/Theropithecus shared a prognathic ancestor after the divergence of Lophocebus. Additionally, this study lends support to the hypothesis that facial reduction and third molar reduction in human evolution were coordinated and may have been the result of pleiotropy alongside changes in diet.
more »
« less
- Award ID(s):
- 2235771
- PAR ID:
- 10585676
- Publisher / Repository:
- Frontiers in Ecology and Evolution
- Date Published:
- Journal Name:
- Frontiers in Ecology and Evolution
- Volume:
- 13
- ISSN:
- 2296-701X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract ObjectivesThe effects of phylogeny and locomotor behavior on long bone structural proportions are assessed through comparisons between adult and ontogenetic samples of extant gorillas. Materials and MethodsA total of 281 wild‐collected individuals were included in the study, divided into four groups that vary taxonomically and ecologically: western lowland gorillas (G. g. gorilla), lowland and highland grauer gorillas(G. b. graueri), and Virunga mountain gorillas (G. b. beringei). Lengths and articular breadths of the major long bones (except the fibula) were measured, and diaphyseal cross‐sectional geometric properties determined using computed tomography. Ages of immature specimens (n = 145) were known or estimated from dental development. Differences between groups in hind limb to forelimb proportions were assessed in both adults and during development. ResultsDiaphyseal strength proportions among adults vary in parallel with behavioral/ecological differences, and not phylogeny. The more arboreal western lowland and lowland grauer gorillas have relatively stronger forelimbs than the more terrestrial Virunga mountain gorillas, while the behaviorally intermediate highland grauer gorillas have intermediate proportions. Diaphyseal strength proportions are similar in young infants but diverge after 2 years of age in western lowland and mountain gorillas, at the same time that changes in locomotor behavior occur. There are no differences between groups in length or articular proportions among either adults or immature individuals. ConclusionLong bone diaphyseal strength proportions in gorillas are developmentally plastic, reflecting behavior, while length and articular proportions are much more genetically canalized. These findings have implications for interpreting morphological variation among fossil taxa.more » « less
-
ABSTRACT ObjectivesOdontoblasts lining the pulp cavity deposit dentine throughout life, meaning the volume of the pulp cavity decreases with age. Primates with more abrasive diets have relatively higher molar pulp volume in their unworn molars than those with less abrasive diets. We propose that species with more abrasive diets deposit additional dentine across their lifespans to help resist wear and extend the effective lifespan of their molars. Whereas both age and wear affect dentine deposition, it is unknown which of these two variables has the greater impact. Materials and MethodsWe measured pulp volume and calculated wear from micro‐CT scans of lower first molars of captive‐bredMacaca fascicularis(n = 13) of known age. We used reduced major axis regressions (alpha = 0.05) to test if age or wear was a better predictor of pulp volume. ResultsBoth variables have a significant negative relationship with pulp volume (age:p = 0.004,R2 = 0.546; wear:p < 0.001,R2 = 0.890). A mixed linear model of pulp volume against wear as main effect and age as covariant had a non‐significant interaction effect (p = 0.078) and confirmed that both age (p = 0.030) and wear (p = 0.004) are significantly negatively correlated with pulp volume. DiscussionResults suggest that whereas pulp volume decreases with age, wear is more strongly correlated with decreasing pulp volume. These findings have implications for interpreting odontoblast activity in response to sensory feedback and the relationship between pulp volume and diet. These results also have implications for using molar pulp volume to estimate age at death in humans.more » « less
-
BackgroundComponents of diet known as fallback foods are argued to be critical in shaping primate dental anatomy. Such foods of low(er) nutritional quality are often non-preferred, mechanically challenging resources that species resort to during ecological crunch periods. An oft-cited example of the importance of dietary fallbacks in shaping primate anatomy is the grey-cheeked mangabeyLophocebus albigena. This species relies upon hard seeds only when softer, preferred resources are not available, a fact which has been linked to its thick dental enamel. Another mangabey species with thick enamel, the sooty mangabeyCercocebus atys, processes a mechanically challenging food year-round. That the two mangabey species are both thickly-enameled suggests that both fallback and routine consumption of hard foods are associated with the same anatomical feature, complicating interpretations of thick enamel in the fossil record. We anticipated that aspects of enamel other than its thickness might differ betweenCercocebus atysandLophocebus albigena.We hypothesized that to function adequately under a dietary regime of routine hard-object feeding, the molars ofCercocebus atyswould be more fracture and wear resistant than those ofLophocebus albigena. MethodsHere we investigated critical fracture loads, nanomechanical properties of enamel, and enamel decussation inCercocebus atysandLophocebus albigena.Molars ofCercopithecus, a genus not associated with hard-object feeding, were included for comparison. Critical loads were estimated using measurements from 2D µCT slices of upper and lower molars. Nanomechanical properties (by nanoindentation) and decussation of enamel prisms (by SEM-imaging) in trigon basins of one upper second molar per taxon were compared. ResultsProtocone and protoconid critical fracture loads were significantly greater inCercocebus atysthanLophocebus albigenaand greater in both than inCercopithecus. Elastic modulus, hardness, and elasticity index in most regions of the crown were greater inCercocebus atysthan in the other two taxa, with the greatest difference in the outer enamel. All taxa had decussated enamel, but that ofCercocebus atysuniquely exhibited a bundle of transversely oriented prisms cervical to the radial enamel. Quantitative comparison of in-plane and out-of-plane prism angles suggests that decussation in trigon basin enamel is more complex inCercocebus atysthan it is in eitherLophocebus albigenaorCercopithecus cephus. These findings suggest thatCercocebus atysmolars are more fracture and wear resistant than those ofLophocebus albigenaandCercopithecus. Recognition of these differences betweenCercocebus atysandLophocebus albigenamolars sharpens our understanding of associations between hard-object feeding and dental anatomy under conditions of routine vs. fallback hard-object feeding and provides a basis for dietary inference in fossil primates, including hominins.more » « less
-
Abstract ObjectivesThis article presents estimates of narrow‐sense heritability and bivariate genetic correlation for 14 tooth crown morphological variants scored on permanent premolars, first molars, and second molars. The objective is to inform data collection and analytical practices in dental biodistance and to provide insights on the development of molar crowns as integrated structures. Materials and MethodsAfrican American dental casts from the Menegaz‐Bock collection were recorded for the Arizona State University Dental Anthropology System. Estimates of narrow‐sense heritability and genetic correlation were generated using SOLAR v.8.1.1, which included assessment of age, sex, and birth year as covariates. Both continuous scale and dichotomized estimates are provided. ResultsHeritability estimates were nonsignificant for the majority of variables; however, for variables yielding significant estimates, values were moderate to high in magnitude and comparable to previous studies. Comparing left and right‐side heritability estimates suggests directional asymmetry in the expression of environmental variance, something not seen in anterior tooth traits. Genetic correlations were moderate among antimeres and metameres and low for different traits scored on the same tooth crown. Although several negative correlations were noted, few reached statistical significance. Results affirm some of the current data cleaning and analytical practices in dental biodistance, but others are called into question. These include the pooling of males and females and combining left and right‐side data into a single dataset. ConclusionsIn comparison to anterior tooth crown traits, postcanine heritabilities were more often non‐significant; however, those traits with significant heritability also tended to produce higher estimates. Genetic correlations were unremarkable, in part, because they were underpowered. However, M1 results may provide insight into the complex relationship between genes, environment, and development in determining ultimate crown form.more » « less
