An official website of the United States government
The electrical characterization and ammonia vapor (NH3) response of a p‐Si/n‐poly[benzimidazobenzophenanthroline] (n‐BBL) thin‐film junction diode are reported. The presence of a depletion layer at the n‐BBL/p‐Si interface is verifiedviacapacitance–voltage measurements, and the built‐in potential is ≈1.8 V. Using the standard diode equation for data analysis, the turn‐on voltage, rectification ratio, and ideality parameter are found to be 2 V, 16, and 6, respectively. The diode is also tested in the presence of NH3vapor where it retained its asymmetricJ–Vbehavior with increased currents and an insignificant change in device parameters. NH3is believed to interact with the adsorbed O2−species on the n‐BBL surface liberating electrons that enhance the diode current. The response time, recovery time, and sensitivity of the diode are 65 s, 121 s, and 52%, respectively. The removal of the gas restores the diode characteristics to their near original shape making it reusable. The diode is also electrically characterized as a function of temperature and is found to retain its rectifying behavior down to 150 K. The rectifying and gas‐sensing features make the diode multifunctional, which expands the range of applications of this ladder‐type conducting polymer.
more »
« less
This content will become publicly available on April 24, 2026
Investigating charge transport in a p -Si/ n -poly(benzimidazobenzophenanthroline)-BBL thin film heterojunction diode
Abstract The physics of charge transport across the interface in an inorganic Si/organic conducting polymer junction diode has received little attention compared to the inorganicp–nsilicon diode. One reason is the amorphous nature of the organic polymer and the polymer chain orientation which introduces disorder and barriers to charge flow. Herein we first present an easy technique to fabricate an inorganic/organic,p-Si/n-poly(benzimidazobenzophenanthroline-BBL) junction diode. The physics of charge transport across the heterojunction, and in the BBL film is then analyzed from the device current-voltage characteristics as a function of temperature in the range 150 K <T< 370 K. The temperature dependence of the diode ideality parameter and of the saturation current density demonstrate that tunneling enhanced charge recombination via exponential trap distributions in the depletion region was responsible for charge transport across the junction. Furthermore, the temperature dependence of the diode conductance revealed that thermal activation and hopping both contributed to charge transport in the BBL film away from the junction. BBL is a ladder polymer with a discrete layered crystal structure that is oriented perpendicular to the substrate. Such polymer chain orientation, combined with a distribution of bond lengths and numerous conjugation paths available for charge delocalization result in the multiple charge transport mechanisms as observed in the diode.
more »
« less
- Award ID(s):
- 2122102
- PAR ID:
- 10586444
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Journal of Physics: Condensed Matter
- Volume:
- 37
- Issue:
- 20
- ISSN:
- 0953-8984
- Page Range / eLocation ID:
- 205701
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Charge transport in electrostatically doped poly[benzimidazobenzophenanthroline]‐BBL thin films in a field‐effect transistor geometry were investigated in the temperature range 150 K < T < 370 K. At low temperatures activation and hopping transport mechanisms dominated, while phonon scattering dominated at high temperatures. The activation energies (EA) were found to lie in the range 140 meV < EA < 400 meV implying the existence of deep traps within the polymer bandgap of 1.8 eV. Two quasi‐linear dependencies ofEAon the gate voltage (Vg) were observed withEAdecreasing asVgincreased. An unexpected “metallic‐like” transport characteristic appeared forT > 335 K which depended onVg. Enhanced electron delocalization combined with increased carrier density could be responsible for this “metallic‐like” behavior. Our results show that the existence of deep traps with multiple energy distributions, combined with increased carrier density led to the unusual temperature dependence of charge transport observed in BBL.more » « less
-
Abstract Organic electrochemical transistors (OECTs) are the building blocks of biosensors, neuromorphic devices, and complementary circuits. One rule in the materials design for OECTs is the inclusion of a hydrophilic component in the chemical structure to enable ion transport in the film. Here, it is shown that the ladder‐type, side‐chain free polymer poly(benzimidazobenzophenanthroline) (BBL) performs significantly better in OECTs than the donor–acceptor type copolymer bearing hydrophilic ethylene glycol side chains (P‐90). A combination of electrochemical techniques reveals that BBL exhibits a more efficient ion‐to‐electron coupling and higher OECT mobility than P‐90. In situ atomic force microscopy scans evidence that BBL, which swells negligibly in electrolytes, undergoes a drastic and permanent change in morphology upon electrochemical doping. In contrast, P‐90 substantially swells when immersed in electrolytes and shows moderate morphology changes induced by dopant ions. Ex situ grazing incidence wide‐angle X‐ray scattering suggests that the particular packing of BBL crystallites is minimally affected after doping, in contrast to P‐90. BBL's ability to show exceptional mixed transport is due to the crystallites’ connectivity, which resists water uptake. This side chain‐free route for the design of mixed conductors could bring the n‐type OECT performance closer to the bar set by their p‐type counterparts.more » « less
-
A new record‐high room‐temperature electron Hall mobility (μRT = 194 cm2 V−1 s−1atn ≈ 8 × 1015 cm−3) for β‐Ga2O3is demonstrated in the unintentionally doped thin film grown on (010) semi‐insulating substrate via metal‐organic chemical vapor deposition (MOCVD). A peak electron mobility of ≈9500 cm2 V−1 s−1is achieved at 45 K. Further investigation on the transport properties indicates the existence of sheet charges near the epilayer/substrate interface. Si is identified as the primary contributor to the background carrier in both the epilayer and the interface, originating from both surface contamination and growth environment. The pregrowth hydrofluoric acid cleaning of the substrate leads to an obvious decrease in Si impurity both at the interface and in the epilayer. In addition, the effect of the MOCVD growth condition, particularly the chamber pressure, on the Si impurity incorporation is studied. A positive correlation between the background charge concentration and the MOCVD growth pressure is confirmed. It is noteworthy that in a β‐Ga2O3film with very low bulk charge concentration, even a reduced sheet charge density plays an important role in the charge transport properties.more » « less
-
Growing a thick high-quality epitaxial layer on the β-Ga2O3 substrate is crucial in commercializing β-Ga2O3 devices. Metal organic chemical vapor deposition (MOCVD) is also well-established for the large-scale commercial growth of β-Ga2O3 and related heterostructures. This paper presents a systematic study of the Schottky barrier diodes fabricated on two different Si-doped homoepitaxial β-Ga2O3 thin films grown on Sn-doped (001) and (010) β-Ga2O3 substrates by MOCVD. X-ray diffraction analysis of the MOCVD-grown sample, room temperature current density–voltage data for different Schottky diodes, and C–V measurements are presented. Diode characteristics, such as ideality factor, barrier height, specific on-resistance, and breakdown voltage, are studied. Temperature dependence (170–360 K) of the ideality factor, barrier height, and Poole–Frenkel reverse leakage mechanism are also analyzed from the J–V–T characteristics of the fabricated Schottky diodes.more » « less
