skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on January 1, 2026

Title: Over 12% efficiency solar-powered green hydrogen production from seawater
Solar-powered water electrolysis holds significant promise for the mass production of green hydrogen. However, the substantial water consumption associated with electrolysis not only increases the cost of green hydrogen but also raises critical concerns about accelerating water scarcity. Although seawater can serve as an infinite water supply for green hydrogen production, its complex composition poses substantial challenges to efficient and reliable electrolysis. Here, we demonstrate a high-efficiency solar-powered green hydrogen production from seawater. Our approach takes advantage of the full-spectrum utilization of solar energy. Photovoltaic electricity is used to drive the electrolysis, whereas the waste heat from solar cells is harnessed to produce clean water through seawater distillation. With natural sunlight and real seawater as the sole inputs, we experimentally demonstrate a 12.6% solar-to-hydrogen conversion efficiency and a 35.9 L m−2 h−1 production rate of green hydrogen under one-sun illumination, where additional 1.2 L m−2 h−1 clean water is obtained as a byproduct. By reducing reliance on clean water and electricity supplies, this work provides a fully sustainable strategy to access green hydrogen with favorable energy efficiency and technoeconomic feasibility.  more » « less
Award ID(s):
2401017
PAR ID:
10588873
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
The Royal Society of Chemistry
Date Published:
Journal Name:
Energy & Environmental Science
ISSN:
1754-5692
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Energy & Environmental Science)
    null (Ed.)
    The decreasing cost of electricity produced using solar and wind and the need to avoid CO 2 emissions from fossil fuels has heightened interest in hydrogen gas production by water electrolysis. Offshore and coastal hydrogen gas production using seawater and renewable electricity is of particular interest, but it is currently economically infeasible due to the high costs of ion exchange membranes and the need to desalinate seawater in existing electrolyzer designs. A new approach is described here that uses relatively inexpensive commercially available membranes developed for reverse osmosis (RO) to selectively transport favorable ions. In an applied electric field, RO membranes have a substantial capacity for proton and hydroxide transport through the active layer while excluding salt anions and cations. A perchlorate salt was used to provide an inert and contained anolyte, with charge balanced by proton and hydroxide ion flow across the RO membrane. Synthetic seawater (NaCl) was used as the catholyte, where it provided continuous hydrogen gas evolution. The RO membrane resistance was 21.7 ± 3.5 Ω cm 2 in 1 M NaCl and the voltages needed to split water in a model electrolysis cell at current densities of 10–40 mA cm −2 were comparable to those found when using two commonly used, more expensive ion exchange membranes. 
    more » « less
  2. ; (, Energies)
    In recent years, global efforts towards a future with sustainable energy have intensified the development of renewable energy sources (RESs) such as offshore wind, solar photovoltaics (PVs), hydro, and geothermal. Concurrently, green hydrogen, produced via water electrolysis using these RESs, has been recognized as a promising solution to decarbonizing traditionally hard-to-abate sectors. Furthermore, hydrogen storage provides a long-duration energy storage approach to managing the intermittency of RESs, which ensures a reliable and stable electricity supply and supports electric grid operations with ancillary services like frequency and voltage regulation. Despite significant progress, the hydrogen economy remains nascent, with ongoing developments and persistent uncertainties in economic, technological, and regulatory aspects. This paper provides a comprehensive review of the green hydrogen value chain, encompassing production, transportation logistics, storage methodologies, and end-use applications, while identifying key research gaps. Particular emphasis is placed on the integration of green hydrogen into both grid-connected and islanded systems, with a focus on operational strategies to enhance grid resilience and efficiency over both the long and short terms. Moreover, this paper draws on global case studies from pioneering green hydrogen projects to inform strategies that can accelerate the adoption and large-scale deployment of green hydrogen technologies across diverse sectors and geographies. 
    more » « less
  3. ; ; ; ; (, 240th ECS Meeting)
    Electrocatalytic upgrading of biomass-derived feedstocks driven by renewable electricity offers a greener way to reduce the global carbon footprint associated with the production of value-added chemicals. Paired electrolysis is an emerging platform for cogenerating high-valued chemicals from both the cathode and anode, potentially powered by renewable electricity from wind or solar sources. By pairing with an anodic biomass oxidation upgrading reaction, the elimination of the sluggish and less valuable water oxidation increases flow cell productivity and efficiency. In this presentation, we report our research progress on paired electrolsysis of HMF to production of higher valued chemicals in electrochemical flow cells. We first prepared an oxide-derived Ag (OD-Ag) electrode with high activity and up to 98.2% selectivity for the ECH of 5-(hydroxymethyl)furfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF), and such efficient conversion was achieved in a three-electrode flow cell. The excellent BHMF selectivity was maintained over a broad potential range with long-term operational stability. In HMF-to-BHMF paired with 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated HMF-to-FDCA conversion, a markedly reduced cell voltage from ~7.5 V to ~2.0 V was observed by transferring the electrolysis from the H-type cell to the flow cell, corresponding to more than four-fold increase in energy efficiency in operation at 10 mA. A combined faradaic efficiency of 163% was obtained to BHMF and FDCA. Alternatively, the anodic hydrogen oxidation reaction on platinum further reduced the cell voltage to only ~0.85 V at 10 mA. Next, we have demonstrated membrane electrode assembly (MEA)-based flow cells for the paired electrolysis of 5-(hydroxymethyl)furfural (HMF) paired electrolysis to bis(hydroxymethyl)furan (BHMF) and 2,5-furandicarboxylic acid (FDCA). In this work, the oxygen evolution reaction (OER) was substituted by TEMPO-mediated HMF oxidation, dropping the cell voltage was from 1.4 V to 0.7 V at a current density of 1.0 mA cm−2. A minimized cell voltage of ~1.5 V for a continuous 24 h co-electrolysis of HMF was then achieved at the current density of 2 mA cm−2(constant current of 10 mA), leading to the highest combined faradaic efficiency (FE) of 139% for HMF-to-BHMF and HMF-to-FDCA. A NiFe oxide catalyst on carbon cloth further replaced the anodic TEMPO mediator for HMF paired electrolysis in a pH-asymmetric flow cell. We envision renewable electrical energy can potentially drive the whole process, thus providing a sustainable avenue towards distributed, scalable, and energy-efficient electrosynthesis. 
    more » « less
  4. ; ; ; ; ; ; ; ; (, Environmental Science & Technology)
    Hydrogen peroxide (H2O2) is a green oxidant widely used in water treatment and sustainable chemistry. Although many advanced materials exist for photo- and electrocatalytic production, H2O2 output and stability depend on reactor design and water quality. This study explores a scalable photochemical system employing bismuth vanadate-coated polymeric optical fibers (POF-BVO) illuminated by 440 nm LEDs. A single 20 cm, 3 mm diameter fiber generates H2O2 at 4.3 mg H2O2 h−1 (430 mg H2O2 gcat −1 h−1), with enhanced rates achieved using bundled fibers. The bundled configuration increases fiber packing density in the reactor to >120 m2 m−3, tripling that of flat-plate photocatalytic reactors. High H2O2 production is achieved using oxygen-permeable hollowfiber membranes to deliver pure O2 or air. The system performs consistently across pH 4−9 and in tap water, wastewater, or seawater. Phosphate ions improve H2O2 stability, resulting in higher concentrations. Over 21 days of continuous operation, the system produces >6 g L−1 of H2O2 with minimal performance degradation. Energy analysis reveals a 2−30x reduction in energy use compared to traditional slurry-based photocatalytic systems, with a three-fiber bundle reaching 27 kWh kg−1 comparable to electrochemical processes. These results demonstrate the potential of the POF-BVO platform as an energy-efficient and modular solution for decentralized H2O2 production. 
    more » « less
  5. ; ; ; ; ; ; (, ACS Catalysis)
    null (Ed.)
    Seawater electrolysis is an attractive approach for producing clean hydrogen fuel in scenarios where freshwater is scarce and renewable electricity is abundant. However, chloride ions (Cl−) in seawater can accelerate electrode corrosion and participate in the undesirable chlorine evolution reaction (CER). This problem is especially acute in acidic conditions that naturally arise at the anode as a result of the desired oxygen evolution reaction (OER). Herein, we demonstrate that ultrathin silicon oxide (SiOx) overlayers on model platinum anodes are highly effective at suppressing the CER in the presence of 0.6 M Cl− in both acidic and unbuffered pH-neutral electrolytes by blocking the transport of Cl− to the catalytically active buried interface while allowing the desired oxygen evolution reaction (OER) to occur there. The permeability of Cl− in SiOx overlayers is 3 orders of magnitude less than that of Cl− in a conventional salt-selective membrane used in reverse osmosis desalination. The overlayers also exhibit robust stability over 12 h in chronoamperometry tests at moderate overpotentials. SiOx overlayers demonstrate a promising step toward achieving selective and stable seawater electrolysis without the need to adjust the pH of the electrolyte. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email