An official website of the United States government
We vary the inflow properties in a finite-volume solver to investigate their effects on the computed cyclonic motion in a right-cylindrical vortex chamber. The latter comprises eight tangential injectors through which steady-state air is introduced under incompressible and inviscid conditions. To minimize cell skewness around injectors, a fine tetrahedral mesh is implemented first and then converted into polyhedral elements, namely, to improve convergence characteristics and precision. Once convergence is achieved, our principal variables are evaluated and compared using a range of inflow parameters. These include the tangential injector speed, count, diameter, and elevation. The resulting computations show that well-resolved numerical simulations can properly predict the forced vortex behavior that dominates in the core region as well as the free vortex tail that prevails radially outwardly, beyond the point of peak tangential speed. It is also shown that augmenting the mass influx by increasing the number of injectors, injector size, or average injection speed further amplifies the vortex strength and all peak velocities while shifting the mantle radially inwardly. Overall, the axial velocity is found to be the most sensitive to vertical displacements of the injection plane. By raising the injection plane to the top half portion of the chamber, the flow character is markedly altered, and an axially unidirectional vortex is engendered, particularly, with no upward motion or mantle formation. Conversely, the tangential and radial velocities are found to be axially independent and together with the pressure distribution prove to be the least sensitive to injection plane relocations.
more »
« less
A quasi complex-lamellar solution for a hemispherically bounded cyclonic flowfield
This work describes an inviscid solution for a cyclonic flowfield evolving in a hemispherical chamber configuration. In this context, a vigorously swirling motion is triggered by a gaseous stream that is introduced tangentially to the inner circumference of the chamber's equatorial plane. The resulting updraft spirals around while sweeping the chamber wall, reverses direction while approaching the headend, and then tunnels itself out through the inner core portion of the chamber. Our analysis proceeds from the Bragg–Hawthorne formulation, which proves effective in the treatment of steady, incompressible, and axisymmetric motions. Then using appropriate boundary conditions, we are able to obtain a closed-form expression for the Stokes streamfunction in both spherical and cylindrical coordinates. Other properties of interest are subsequently deduced, and these include the principal velocities and pressure distributions, vorticity, swirl intensity, helicity density, crossflow velocity, and the location of the axial mantle; the latter separates the outer annular updraft from the inner, centralized downdraft. Due in large part to the overarching spherical curvature, the cyclonic motion also exhibits a polar mantle across which the flow becomes entirely radial inward. Along this lower and shorter spherical interface, the polar velocity vanishes while switching angular direction. Interestingly, both polar and axial mantles coincide in the exit plane where the ideal outlet size, prescribed by the mantle position, is found to be approximately 70.7% of the chamber radius. We thus recover the same mantle fraction of the cyclonic flow analog in a right-cylindrical chamber where an essentially complex-lamellar motion is established.
more »
« less
- Award ID(s):
- 1761675
- PAR ID:
- 10589113
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Physics of Fluids
- Volume:
- 33
- Issue:
- 8
- ISSN:
- 1070-6631
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We vary the inflow properties in a finite-volume solver to investigate their effects on the computed cyclonic motion in a right-cylindrical vortex chamber. The latter comprises eight tangential injectors through which steady-state air is introduced under incompressible and inviscid conditions. To minimize cell skewness around injectors, a fine tetrahedral mesh is implemented first and then converted into polyhedral elements, namely, to improve convergence characteristics and precision. Once convergence is achieved, our principal variables are evaluated and compared using a range of inflow parameters. These include the tangential injector speed, count, diameter, and elevation. The resulting computations show that well-resolved numerical simulations can properly predict the forced vortex behavior that dominates in the core region as well as the free vortex tail that prevails radially outwardly, beyond the point of peak tangential speed. It is also shown that augmenting the mass influx by increasing the number of injectors, injector size, or average injection speed, further amplifies the vortex strength and all peak velocities while shifting the mantle radially inwardly. Overall, the axial velocity is found to be the most sensitive to vertical displacements of the injection plane. By raising the injection plane to the top half portion of the chamber, the flow character is markedly altered, and an axially unidirectional vortex is engendered, particularly, with no upward motion or mantle formation. Conversely, the tangential and radial velocities are found to be axially independent and together with the pressure distribution prove to be the least sensitive to injection plane relocations.more » « less
-
This study focuses on the development of two analytical models that describe the wall-bounded cyclonic flowfield in a hemispherical domain. The closed-form solutions that we pursue are motivated by the need to characterize the swirling bidirectional motion engendered in an upper stage thrust chamber, namely, the VR35K-A VORTEX® engine, conceived and developed by Sierra Nevada Corporation. Our analysis proceeds from the Bragg–Hawthorne formulation, which is quite effective in the treatment of steady, inviscid, and axisymmetric flows. In this work, we show that two rotational solutions may be derived for particular specifications of the stagnation head and tangential angular momentum expressions that appear in the Bragg–Hawthorne equation. Then, with the parental streamfunctions in hand, other properties of interest are deduced and these include the main velocity and pressure variations, vorticities, crossflow velocities, extensional and shearing strain rates, virtual energy dissipation rates, and both axial and polar mantle distributions; the latter consist of pairs of rotating, non-translating interfacial layers, separating the so-called inner and outer bidirectional and bipolar regions, respectively. More specifically, two Beltramian solutions are identified with mantles that appear at 50% and 61.06% of the chamber radius, respectively. By matching the outlet radius of the chamber to the mantle location in the equatorial plane, the outflow is permitted to exit the chamber seamlessly. In both models, the axial and radial velocities vary linearly with the injection speed and a characteristic inflow parameter consisting of a geometric ratio of the inlet area and the chamber radius squared.more » « less
-
This work presents an exact solution of Euler's incompressible equations in the context of a bidirectional vortex evolving inside a conically shaped cyclonic chamber. The corresponding helical flowfield is modeled under inviscid conditions assuming constant angular momentum. By leveraging the axisymmetric nature of the problem, a steady-state solution of the generalized Beltramian type is obtained directly from first principles, namely, from the Bragg–Hawthorne equation in spherical coordinates. The resulting stream function representation enables us to fully describe the ensuing swirl-dominated motion including its fundamental flow characteristics. After identifying an isolated singularity that appears at a cone divergence half-angle of 63.43°, two piecewise formulations are provided that correspond to either fluid injection or extraction at the top section of the conical cyclone. In this process, analytical expressions are readily retrieved for the three velocity components, vorticity, and pressure. Other essential flow indicators, such as the theoretically preferred mantle orientation, the empirically favored locus of zero vertical velocity, the maximum polar and axial velocities, the crossflow velocity, and other such terms, are systematically deduced. Results are validated using limiting process verifications and comparisons to both numerical and experimental measurements. The subtle differences between the present model and a strictly Beltramian flowfield are also highlighted and discussed. The conically cyclonic configuration considered here is relevant to propulsive devices, such as vortex-fired liquid rocket engines with tapered walls; meteorological phenomena, such as tornadoes, dust devils, and fire whirls; and industrial contraptions, such as cyclonic flow separators, collectors, centrifuges, boilers, vacuum cleaners, cement grinders, and so on.more » « less
-
Effects of nozzle inlet size and curvature on the flow development in a bidirectional vortex chamberA finite-volume solver is used to describe the cyclonic motion in a cylindrical vortex chamber comprising eight tangential injectors and a variable nozzle size. The simulations are performed under steady, incompressible, and inviscid flow conditions with air as the working fluid. First, we apply a fine tetrahedral mesh to minimize cell skewness, particularly near injectors. Second, this mesh is converted into a polyhedral grid to improve convergence characteristics and precision. After achieving convergence, the velocity components are evaluated and compared to existing analytical solutions. We find that well-resolved numerical simulations can accurately predict the expected forced vortex behavior in the core region as well as the free vortex tail in the outer region. We also confirm that the swirl velocity remains axially invariant irrespective of the outlet radius. Similarly, we are able to ascertain that the axial and radial velocities embody the bidirectional nature of the motion. As for the computed pressure distribution, it is found to agree quite well with both theoretical formulations and experimental measurements of cyclone separators. Then using a parametric trade study, the effect of nozzle variations on the internal flow character, mantle structure, and recirculation zones is systematically investigated. Apart from the exit diameter, we find that the nozzle length and inlet curvature can substantially affect the internal flow development including the formation of backflow regions, recirculation zones, and mantle excursions. Finally, an empirical relation is constructed for the nozzle radius of curvature and shown to effectively suppress the emergence of recirculation and backflow regions.more » « less
