An official website of the United States government
Gas-dynamic virtual nozzles (GDVNs) play a vital role in delivering biomolecular samples during diffraction measurements at X-ray free-electron laser facilities. Recently, submicrometer resolution capabilities of two-photon polymerization 3D printing techniques opened the possibility to quickly fabricate gas-dynamic virtual nozzles with practically any geometry. In our previous work, we exploited this capability to print asymmetric gas-dynamic virtual nozzles that outperformed conventional symmetric designs, which naturally leads to the question of how to identify the optimal gas-dynamic virtual nozzle geometry. In this work, we develop a 3D computational fluid dynamics pipeline to investigate how the characteristics of microjets are affected by gas-dynamic virtual nozzle geometry, which will allow for further geometry optimizations and explorations. We used open-source software (OpenFOAM) and an efficient geometric volume-of-fluid method ( isoAdvector ) to affordably and accurately predict jet properties for different nozzle geometries. Computational resources were minimized by utilizing adaptive mesh refinement. The numerical simulation results showed acceptable agreement with the experimental data, with a relative error of about 10% for our test cases that compared bell- and cone-shaped sheath-gas cavities. In these test cases, we used a relatively low sheath gas flow rate (6 mg/min), but future work including the implementation of compressible flows will enable the investigation of higher flow rates and the study of asymmetric drip-to-jet transitions.
more »
« less
Comprehensive characterization of gas dynamic virtual nozzles for x-ray free-electron laser experiments
We introduce a hardware–software system for rapidly characterizing liquid microjets for x-ray diffraction experiments. An open-source python-based software package allows for programmatic and automated data collection and analysis. We show how jet speed, length, and diameter are influenced by nozzle geometry, gas flow rate, liquid viscosity, and liquid flow rate. We introduce “jet instability” and “jet probability” metrics to help quantify the suitability of a given nozzle for x-ray diffraction experiments. Among our observations were pronounced improvements in jet stability and reliability when using asymmetric needle-tipped nozzles, which allowed for the production of microjects smaller than 250 nm in diameter, traveling faster than 120 m/s.
more »
« less
- PAR ID:
- 10589126
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Structural Dynamics
- Volume:
- 11
- Issue:
- 6
- ISSN:
- 2329-7778
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Gas dynamic virtual nozzles (GDVNs) produce microscopic flow-focused liquid jets and droplets and play an important role at X-ray free-electron laser (XFEL) facilities where they are used to steer a stream of hydrated biomolecules into an X-ray focus during diffraction measurements. Highly stable and reproducible microjet and microdroplets are desired, as are flexible fabrication methods that enable integrated mixing microfluidics, droplet triggering mechanisms, laser illumination, and other customized features. In this study, we develop the use of high-resolution 3D nano-printing for the production of monolithic, asymmetric GDVN designs that are difficult to fabricate by other means. We also develop a dual-pulsed nanosecond image acquisition and analysis platform for the characterization of GDVN performance, including jet speed, length, diameter, and directionality, among others. We show that printed GDVNs can form microjets with very high degree of reproducibility, down to sub-micron diameters, and with water jet speeds beyond 170 m/s.more » « less
-
The effect of nozzle surface features on the overall atomization behavior of a liquid jet is analyzed in the present computational work by adopting three representative geometries, namely a single X-ray tomography scan of the Engine Combustion Network’s Spray A nozzle (Unprocessed), a spline reconstruction of multiple scans (Educated), and a purely external flow configuration. The latter configuration is often used in fundamental jet atomization studies. Numerically, the two-phase flow is solved based on algebraic volume-of-fluid methodology utilizing the OpenFoam solver, interFoam. Quantitative characterization of the surface features concerning the first two geometries reveals that while both of them have similar levels of cylindrical asymmetries, the nozzle configuration pertaining to the Unprocessed geometry has much larger surface features along the streamwise direction than the Educated geometry. This produces for the Unprocessed configuration a much larger degree of non-axial velocity components in the flow exiting the orifice and also a more pronounced disturbance of the liquid surface in the first few diameters downstream of the nozzle orifice. Furthermore, this heightened level of surface destabilization generates a much shorter intact liquid core length, that is, it produces faster primary atomization. The surprising aspect of this finding is that the differences between the Unprocessed and Educated geometries are of [Formula: see text](1) μm, and they are able to produce [Formula: see text](1) mm effects in the intact liquid core length. In spite of more pronounced atomization for the Unprocessed geometry, the magnitude of the turbulent liquid kinetic energy is roughly the same as the Educated geometry. This highlights the important role of mean field quantities, in particular, non-axial velocity components, in precipitating primary atomization. At the other end of the spectrum, the external-only configuration has the mildest level of surface disturbances in the near field resulting in the longest intact liquid core length.more » « less
-
This paper presents experimental results for the performance effects of different converging- diverging graphite nozzle throat diameters on an in-house developed kerosenenitrous oxide liquid rocket test stand. The project aims to enhance the performance and efficiency of small-scale liquid rocket engines by experimentally investigating the effects of nozzle throat diameter on thrust and specific impulse. By confirming the correlation between nozzle geometry and the experimental data, it provides valuable insight for improving propulsion systems and components used in experimental rocketry such as sounding rockets. This study will evaluate two different nozzle throat diameters under varying propellant pressures and mass flow rates. The liquid rocket test stand consists of an external aluminum casing with a combustion chamber measuring 20” in length with an outer diameter of 76 mm and an internal diameter of 1.66”. The nozzle throat diameter tested will be 58/64” and 60/64”, each with a fixed exit diameter of 1.82”. Experimental results were collected over a range of total mass flow rates using data acquisition systems and analyzed using graphs and trend lines. The results indicate that as the throat diameter increases, the thrust output and specific impulse increase, although the results are inconclusive due to leaks and a back flame during testing, possibly skewing the results. The ablative wear was analyzed based on the nozzle throat size and mass flow rate. The knowledge gained from this study can be used to prevent future accidents for small-scale liquid rocket engine test stands and verify if the trends seen will be applicable to different nozzle materials and find the optimum nozzle throat diameter.more » « less
-
In fiber spinning of photopolymers, surface tension limits the diameter of the fiber that can be produced due to the Rayleigh–Plateau instability. Submerging a pre-fiber jet in a miscible environment liberates the system from capillary effects, thus allowing the jet to be stretched into thin threads without instability. In this work, we systematically investigated a spinning method using miscible liquids, called jet-assisted wet spinning (JAWS), where stretching is achieved by a nearby submerged liquid jet. The diameter of the pre-fiber jet is a function of its flow rate and position relative to the assisting submerged liquid jet. A particular case where the main jet is modeled as the Landau–Squire jet is used to demonstrate the tracer-like thinning behavior of the pre-fiber jet. Experiments show that buoyancy has a significant impact on the pre-fiber jet diameter because of its influence on the entrainment trajectory. Overall, our results demonstrate the potential for the parallelization of JAWS for high-throughput fiber production.more » « less
