An official website of the United States government
Abstract Lithium‐ion batteries (LIBs) are increasingly encouraged to enhance their environmental friendliness and safety while maintaining optimal energy density and cost‐effectiveness. Although various electrolytes using greener and safer glyme solvents have been reported, the low charge voltage (usually lower than 4.0 V vs Li/Li+) restricts the energy density of LIBs. Herein, tetraglyme, a less‐toxic, non‐volatile, and non‐flammable ether solvent, is exploited to build safer and greener LIBs. It is demonstrated that ether electrolytes, at a standard salt concentration (1 m), can be reversibly cycled to 4.5 V vs Li/Li+. Anchored with Boron‐rich cathode‐electrolyte interphase (CEI) and mitigated current collector corrosion, the LiNi0.8Mn0.1Co0.1O2(NMC811) cathode delivers competitive cyclability versus commercial carbonate electrolytes when charged to 4.5 V. Synchrotron spectroscopic and imaging analyses show that the tetraglyme electrolyte can sufficiently suppress the overcharge behavior associated with the high‐voltage electrolyte decomposition, which is advantageous over previously reported glyme electrolytes. The new electrolyte also enables minimal transition metal dissolution and deposition. NMC811||hard carbon full cell delivers excellent cycling stability at C/3 with a high average Coulombic efficiency of 99.77%. This work reports an oxidation‐resilient tetraglyme electrolyte with record‐high 4.5 V stability and enlightens further applications of glyme solvents for sustainable LIBs by designing Boron‐rich interphases.
more »
« less
Elucidating the role of cathode identity: Voltage-dependent reversibility of anode-free batteries
The cathode material in a lithium (Li) battery determines the system cost, energy density, and thermal stability. In anode-free batteries, the cathode also serves as the source of Li for electrodeposition, thus impacting the reversibility of plating and stripping. Here, we show that the reason LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes deliver lower Coulombic efficiencies than LiFePO4 (LFP) is the formation of tortuous Li deposits, acidic species in the electrolyte, and accumulation of “dead” Li0. Batteries containing an LFP cathode generate dense Li deposits that can be reversibly stripped, but Li is lost to the solid electrolyte interphase (SEI) and corrosion according to operando 7Li NMR, which seemingly “revives” dead Li0. X-ray photoelectron spectroscopy (XPS) and in situ 19F/1H NMR indicate that these differences arise because upper cutoff voltage alters electrolyte decomposition, where low-voltage LFP cells prevent anodic decomposition, ultimately mitigating the formation of protic species that proliferate upon charging NMC811.
more »
« less
- Award ID(s):
- 2045262
- PAR ID:
- 10593321
- Publisher / Repository:
- Chem
- Date Published:
- Journal Name:
- Chem
- Volume:
- 10
- Issue:
- 10
- ISSN:
- 2451-9294
- Page Range / eLocation ID:
- 3159 to 3183
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Suppressing Li dendrite growth has gained research interest due to the high theoretical capacity of Li metal anodes. Traditional Celgard membranes which are currently used in Li metal batteries fall short in achieving uniform Li flux at the electrode/electrolyte interface due to their inherent irregular pore sizes. Here, the use of an ultrathin (≈1.2 nm) carbon nanomembrane (CNM) which contains sub‐nanometer sized pores as an interlayer to regulate the mass transport of Li‐ions is demonstrated. Symmetrical cell analysis reveals that the cell with CNM interlayer cycles over 2x longer than the control experiment without the formation of Li dendrites. Further investigation on the Li plating morphology on Cu foil reveals highly dense deposits of Li metal using a standard carbonate electrolyte. A smoothed‐particle hydrodynamics simulation of the mass transport at the anode–electrolyte interface elucidates the effect of the CNM in promoting the formation of highly dense Li deposits and inhibiting the formation of dendrites. A lithium metal battery fabricated using the LiFePO4cathode exhibits a stable, flat voltage profile with low polarization for over 300 cycles indicating the effect of regulated mass transport.more » « less
-
A major challenge for lithium-containing electrochemical systems is the formation of lithium carbonates. Solid-state electrolytes circumvent the use of organic liquids that can generate these species, but they are still susceptible to Li2CO3 formation from exposure to water vapor and carbon dioxide. It is reported here that trace quantities of Li2CO3, which are re-formed following standard mitigation and handling procedures, can decompose at high charging potentials and degrade the electrolyte–cathode interface. Operando electrochemical mass spectrometry (EC–MS) is employed to monitor the outgassing of solid-state batteries containing the garnet electrolyte Li7La3Zr2O12 (LLZO) and using appropriate controls CO2 and O2 are identified to emanate from the electrolyte–cathode interface at charging potentials > 3.8 V (vs Li/Li+). The gas evolution is correlated with a large increase in cathode interfacial resistance observed by potential-resolved impedance spectroscopy. This is the first evidence of electrochemical decomposition of interfacial Li2CO3 in garnet cells and suggests a need to report “time-to-assembly” for cell preparation methodsmore » « less
-
Nowadays, lithium-ion batteries are undoubtedly known as the most promising rechargeable batteries. However, these batteries face some big challenges, like not having enough energy and not lasting long enough, that should be addressed. Ternary Ni-rich Li[NixCoyMnz]O2 and Li[NixCoyAlz]O2 cathode materials stand as the ideal candidate for a cathode active material to achieve high capacity and energy density, low manufacturing cost, and high operating voltage. However, capacity gain from Ni enrichment is nullified by the concurrent fast capacity fading because of issues such as gas evolution, microcracks propagation and pulverization, phase transition, electrolyte decomposition, cation mixing, and dissolution of transition metals at high operating voltage, which hinders their commercialization. In order to tackle these problems, researchers conducted many strategies, including elemental doping, surface coating, and particle engineering. This review paper mainly talks about origins of problems and their mechanisms leading to electrochemical performance deterioration for Ni-rich cathode materials and modification approaches to address the problems.more » « less
-
The role of the cathode–electrolyte interphase (CEI) on battery performance has been historically overlooked due to the anodic stability of carbonate-based electrolytes used in Li-ion batteries. Yet, over the past few decades, degradation in device lifetime has been attributed to cathode surface reactivity, ion transport at the cathode/electrolyte interface, and structural transformations that occur at the cathode surface. In this review, we highlight recent progress in analytical techniques that have facilitated these insights and elucidated not only the CEI composition but also the spatial distribution of electrolyte decomposition products in the CEI as well as cathode-driven reactions that occur during battery operation. With a deeper understanding of the CEI and the processes that lead to its formation, these advanced characterization tools can unlock routes to mitigate impedance rise, particle cracking, transition metal dissolution, and electrolyte consumption, ultimately enabling longer lasting, safer batteries.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.chempr.2024.06.008
