skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Sustainable Multifunctionality: Bio‐Inspired Printing of Nanocellulose Aerogel Acoustical Materials
Abstract The 3D freeze printing (3DFP) of nanocellulose aerogels are demonstrated with large‐scale aligned pore orientations as a sustainable alternative to current acoustical materials. In contrast with the unidirectional pore network orientations obtained from current 3DFP techniques, a bidirectional orientation is achieved by using an inhomogeneous printing substrate to alter the thermal gradient within the print volume. The microstructural morphology shows that bidirectional printing results in a 2D pore orientation, with comparatively thinner pore walls and larger pore widths. Acoustic measurements reveal that altering the pore network characteristics significantly affects the acoustical behavior of the printed CNC aerogels; the wider pores allow the bidirectional CNC aerogels to provide higher sound absorption performance at lower frequencies than the unidirectional samples. Notably, both 3D Freeze printed CNC aerogels provide substantially higher sound transmission loss performance as compared to current acoustical materials. The unidirectional pore structure results in CNC aerogels with higher stiffness and improved energy absorption performance, with both 3D freeze printed CNC aerogels outperforming other CNC aerogel materials in their stiffness‐to‐density ratios. The ability to simultaneously control their pore orientation and macrostructural geometry paves the way for printing complex shaped CNC aerogel structures for multifunctional noise control applications.  more » « less
Award ID(s):
2309995
PAR ID:
10593461
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Advanced Materials Technologies
Volume:
9
Issue:
16
ISSN:
2365-709X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Environmental Science: Nano)
    null (Ed.)
    Graphene-based 3D macroscopic aerogels with their hierarchical porous structures and mechanical strength have been widely explored for removing contaminants from water. However, their large-scale manufacturing and application in various water treatment processes are limited by their scalability. In this study, we report a proof-of-concept direct ink writing (DIW) 3D printing technique and subsequent freeze-drying to prepare graphene-biopolymer aerogels for water treatment. To provide appropriate rheology for DIW printability, two bio-inspired polymers, polydopamine (PDA) and bovine serum albumin (BSA), were added to the graphene-based ink. The biopolymers also contributed to the contaminant removal capacity of the resultant graphene-polydopamine-bovine serum albumin (G-PDA-BSA) aerogel. The physicochemical properties of the aerogel were thoroughly characterized from the nano- to macroscale. The 3D printed aerogel exhibited excellent water contaminant removal performance for heavy metals (Cr( vi ), Pb( ii )), organic dyes (cationic methylene blue and anionic Evans blue), and organic solvents ( n -hexane, n -heptane, and toluene) in batch adsorption studies. The electrostatic interaction dominated the removal of heavy metals and dyes while the hydrophobic interaction dominated the removal of organic solvents from water. Moreover, the aerogel showed superb regeneration and reuse potential. The aerogel removed 100% organic solvents over 10 cycles of regeneration and reuse; additionally, the removal efficiencies for methylene blue decreased by 2–20% after the third cycle. The fit-for-design 3D printed aerogel was also effectively used as a bottle-cap flow-through filter for dye removal. The potential and vision of the 3D printing approach for graphene-based water treatment presented here can be extended to other functional nanomaterials, can enable shape-specific applications of fit-for-purpose adsorbents/reactors and point-of-use filters, and can materialize the large-scale manufacturing of nano-enabled water treatment devices and technologies. 
    more » « less
  2. ; ; ; (, Advanced Materials)
    Abstract Additive manufacturing (AM) of aerogels increases the achievable geometric complexity, and affords fabrication of hierarchically porous structures. In this work, a custom heated material extrusion (MEX) device prints aerogels of poly(phenylene sulfide) (PPS), an engineering thermoplastic, via in situ thermally induced phase separation (TIPS). First, pre‐prepared solid gel inks are dissolved at high temperatures in the heated extruder barrel to form a homogeneous polymer solution. Solutions are then extruded onto a room‐temperature substrate, where printed roads maintain their bead shape and rapidly solidify via TIPS, thus enabling layer‐wise MEX AM. Printed gels are converted to aerogels via postprocessing solvent exchange and freeze‐drying. This work explores the effect of ink composition on printed aerogel morphology and thermomechanical properties. Scanning electron microscopy micrographs reveal complex hierarchical microstructures that are compositionally dependent. Printed aerogels demonstrate tailorable porosities (50.0–74.8%) and densities (0.345–0.684 g cm−3), which align well with cast aerogel analogs. Differential scanning calorimetry thermograms indicate printed aerogels are highly crystalline (≈43%), suggesting that printing does not inhibit the solidification process occurring during TIPS (polymer crystallization). Uniaxial compression testing reveals that compositionally dependent microstructure governs aerogel mechanical behavior, with compressive moduli ranging from 33.0 to 106.5 MPa. 
    more » « less
  3. ; ; ; ; ; (, Journal of Manufacturing Science and Engineering)
    null (Ed.)
    Abstract The conventional manufacturing processes of aerogel insulation material is largely relying on the supercritical drying, which suffers from issues of massive energy consumption, high-cost equipment, and prolonged processing time. With the consideration of large market demand of the aerogel insulation material in the next decade, a low-cost and scalable fabrication technique is highly desired. In this paper, a direct ink writing (DIW) method is used to three-dimensionally fabricate the silica aerogel insulation material, followed by room-temperature and ambient pressure drying. Compared to the supercritical drying and freeze-drying, the reported method significantly reduces the fabrication time and costs. The cost-effective DIW technique offers the capability to print complex hollow internal structures, coupled with the porous structure, is found to be beneficial to the thermal insulation property. The addition of fiber to the ink assures the durability of the fabricated product, without sacrificing the thermal insulation performance. The foam ink preparation methods and the printability are demonstrated in this paper, along with the printing of complex three-dimensional geometries. The thermal insulation performance of the printed objects is characterized, and the mechanical properties are also examined. The proposed approach is found to have 56% reduction in the processing time. The printed silica aerogels exhibit a low thermal conductivity of 0.053 W m−1 K−1. 
    more » « less
  4. ; ; ; ; ; ; ; (, Advanced Materials)
    Liquid crystalline elastomers (LCEs) are anisotropic soft materials capable of large dimensional changes when subjected to a stimulus. The magnitude and directionality of the stimuli‐induced thermomechanical response is associated with the alignment of the LCE. Recent reports detail the preparation of LCEs by additive manufacturing (AM) techniques, predominately using direct ink write printing. Another AM technique, digital light process (DLP) 3D printing, has generated significant interest as it affords LCE free‐forms with high fidelity and resolution. However, one challenge of printing LCEs using vat polymerization methods such as DLP is enforcing alignment. Here, we document the preparation of aligned, main‐chain LCEs via DLP 3D printing using a 100 mT magnetic field. Systematic examination isolates the contribution of magnetic field strength, alignment time, and build layer thickness on the degree of orientation in 3D printed LCEs. Informed by this fundamental understanding, DLP is used to print complex LCE free‐forms with through‐thickness variation in both spatial orientations. The hierarchical variation in spatial orientation within LCE free‐forms is used to produce objects that exhibit mechanical instabilities upon heating. DLP printing of aligned LCEs opens new opportunities to fabricate stimuli‐responsive materials in form factors optimized for functional use in soft robotics and energy absorption. 
    more » « less
  5. ; (, Processes)
    Graphene oxide (GO) aerogels were discovered as lightweight, highly porous materials with exceptional mechanical, electrical, and thermal properties. These properties make them suitable for a wide range of advanced applications. This paper discusses GO aerogel synthesis processes, characterization, mechanical properties, applications, and future directions. The synthesis methods discussed include hydrothermal reduction, chemical reduction, crosslinking methods, and 3D printing, with major emphasis on their effects on the aerogel’s structural and functional attributes. A detailed analysis of mechanical characterization techniques is elaborated upon, along with highlighting the effects of parameters such as porosity, crosslinking, and graphene concentration on mechanical strength, elasticity, and stability. Research has been carried out to find GO aerogel applications in various sectors, such as energy storage, environmental remediation, sensors, and thermal management, showcasing their versatility and potential. Additionally, the combination of nanoparticles and doping strategies to improve specific properties is addressed. The review concludes by identifying current challenges in scalability, brittleness, and property optimization and proposes future directions for synthesis innovations. This work will be helpful for researchers and engineers exploring new possibilities for GO aerogels in both academic and industrial areas. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email