An official website of the United States government
Abstract Electrically pumped lasing from hybrid organic–inorganic metal‐halide perovskite semiconductors could lead to nonepitaxial diode lasers that are tunable throughout the visible and near‐infrared spectrum; however, a viable laser diode architecture has not been demonstrated to date. Here, an important step toward this goal is achieved by demonstrating two distinct distributed feedback light‐emitting diode architectures that achieve low threshold, optically pumped lasing. Bottom‐ and top‐emitting perovskite light‐emitting diodes are fabricated on glass and Si substrates, respectively, using a polydimethylsiloxane stamp in the latter case to nanoimprint a second‐order distributed feedback grating directly into the methylammonium lead iodide active layer. The devices exhibit room temperature thresholds as low as ≈6 µJ cm−2, a peak external quantum efficiency of ≈0.1%, and a maximum current density of ≈2 A cm−2that is presently limited by degradation associated with excessive leakage current. In this low current regime, electrical injection does not adversely affect the optical pump threshold, leading to a projected threshold current density of ≈2 kA cm−2. Operation at low temperature can significantly decrease this threshold, but must overcome extrinsic carrier freeze‐out in the doped organic transport layers to maintain a reasonable drive voltage.
more »
« less
Enhanced Amplified Spontaneous Emission from Optically Pumped Perovskite Light‐Emitting Diodes with Sodium Fluoride Additives
Metal halide perovskites represent a promising class of gain media for next‐generation nonepitaxial laser diodes. However, fully electrically pumped perovskite laser diodes have not been achieved yet. Herein, the use of sodium fluoride (NaF) is explored as an efficient additive in halide perovskite films to improve their optical and light amplification properties. The incorporation of NaF in perovskites leads to a remarkable threefold increase in light‐emitting intensity. The threshold of amplified spontaneous emission (ASE) by optical pumping is reduced by more than 20%, from ≈13.5 to 10.4 μJ cm−2. Furthermore, the NaF‐modified perovskites exhibit stable ASE emission, even after exposure to 1.5 billion optical pulses, highlighting substantial improvements in the material's photostability. Finally, optically pumped ASE is observed from a full perovskite light‐emitting diode stack, including lossy metal electrodes. This work demonstrates significant progress toward the development of electrically pumped perovskite lasers.
more »
« less
- PAR ID:
- 10594026
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Photonics Research
- Volume:
- 6
- Issue:
- 8
- ISSN:
- 2699-9293
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Optically pumped white light-emitting diodes (WLEDs), consisting of blue/ultraviolet LED chips and down conversion phosphors, have a wide range of applications in our daily life, such as full color display and solid-state lighting. While remarkable progress in light quality, device efficiency, and lifetime has been achieved during the last two decades, many challenges remain in optically pumped WLEDs, and searching for low cost high performance down conversion phosphors is still of great interest. Recently, metal halide perovskites have emerged as a highly promising new generation of light emitters for their exceptional optical properties with high quantum efficiencies and color tunability, which have also inspired researchers to investigate their derivatives. In this perspective, we briefly review the progress during the last few years in the development of metal halide perovskites and perovskite-related materials as down conversion phosphors for optically pumped WLEDs. We also highlight some major issues and challenges that need to be addressed to enable perovskite-based light emitters to possibly replace currently used rare-earth doped inorganic phosphors and quantum dots.more » « less
-
Metal-halide perovskites, in particular their nanocrystal forms, have emerged as a new generation of light-emitting materials with exceptional optical properties, including narrow emissions covering the whole visible region with high photoluminescence quantum efficiencies of up to near-unity. Remarkable progress has been achieved over the last few years in the areas of materials development and device integration. A variety of synthetic approaches have been established to precisely control the compositions and microstructures of metal-halide perovskite nanocrystals (NCs) with tunable bandgaps and emission colors. The use of metal-halide perovskite NCs as active materials for optoelectronic devices has been extensively explored. Here, we provide a brief overview of recent advances in the development and application of metal-halide perovskite NCs. From color tuning via ion exchange and manipulation of quantum size effects, to stability enhancement via surface passivation, new chemistry for materials development is discussed. In addition, processes in optoelectronic devices based on metal-halide perovskite NCs, in particular, light-emitting diodes and radiation detectors, will be introduced. Opportunities for future research in metal-halide perovskite NCs are provided as well.more » « less
-
Abstract Hybrid metal‐halide perovskites (MHPs) have shown remarkable optoelectronic properties as well as facile and cost‐effective processability. With the success of MHP solar cells and light‐emitting diodes, MHPs have also exhibited great potential as gain media for on‐chip lasers. However, to date, stable operation of optically pumped MHP lasers and electrically driven MHP lasers—an essential requirement for MHP laser's insertion into chip‐scale photonic integrated circuits—is not yet demonstrated. The main obstacles include the instability of MHPs in the atmosphere, rudimentary MHP laser cavity patterning methods, and insufficient understanding of emission mechanisms in MHP materials and cavities. This review aims to provide a detailed overview of different strategies to improve the intrinsic properties of MHPs in the atmosphere and to establish an optimal MHP cavity patterning method. In addition, this review discusses different emission mechanisms in MHP materials and cavities and how to distinguish them.more » « less
-
Abstract Metal halide perovskites have drawn tremendous attention in optoelectronic applications owing to the rapid development in photovoltaic and light‐emitting diode devices. More recently, these materials are demonstrated as excellent gain media for laser applications due to their large absorption coefficient, low defect density, high charge carrier mobility, long carrier diffusion length, high photoluminescence quantum yield, and low Auger recombination rate. Despite the great progress in laser applications, the development of perovskite lasers is still in its infancy and the realization of electrically pumped lasers has not yet been demonstrated. To accelerate the development of perovskite‐based lasers, it is important to understand the fundamental photophysical characteristics of perovskite gain materials. Here, the structure and gain behavior in various perovskite materials are discussed. Then, the effects of charge carrier dynamics and electron–phonon interaction on population inversion in different types of perovskite materials are analyzed. Further, recent advances in perovskite‐based lasers are also highlighted. Finally, a perspective on perovskite material design is presented and the remaining challenges of perovskite lasers are discussed.more » « less
