An official website of the United States government
Metal halide perovskites represent a promising class of gain media for next‐generation nonepitaxial laser diodes. However, fully electrically pumped perovskite laser diodes have not been achieved yet. Herein, the use of sodium fluoride (NaF) is explored as an efficient additive in halide perovskite films to improve their optical and light amplification properties. The incorporation of NaF in perovskites leads to a remarkable threefold increase in light‐emitting intensity. The threshold of amplified spontaneous emission (ASE) by optical pumping is reduced by more than 20%, from ≈13.5 to 10.4 μJ cm−2. Furthermore, the NaF‐modified perovskites exhibit stable ASE emission, even after exposure to 1.5 billion optical pulses, highlighting substantial improvements in the material's photostability. Finally, optically pumped ASE is observed from a full perovskite light‐emitting diode stack, including lossy metal electrodes. This work demonstrates significant progress toward the development of electrically pumped perovskite lasers.
more »
« less
Optically pumped white light-emitting diodes based on metal halide perovskites and perovskite-related materials
Optically pumped white light-emitting diodes (WLEDs), consisting of blue/ultraviolet LED chips and down conversion phosphors, have a wide range of applications in our daily life, such as full color display and solid-state lighting. While remarkable progress in light quality, device efficiency, and lifetime has been achieved during the last two decades, many challenges remain in optically pumped WLEDs, and searching for low cost high performance down conversion phosphors is still of great interest. Recently, metal halide perovskites have emerged as a highly promising new generation of light emitters for their exceptional optical properties with high quantum efficiencies and color tunability, which have also inspired researchers to investigate their derivatives. In this perspective, we briefly review the progress during the last few years in the development of metal halide perovskites and perovskite-related materials as down conversion phosphors for optically pumped WLEDs. We also highlight some major issues and challenges that need to be addressed to enable perovskite-based light emitters to possibly replace currently used rare-earth doped inorganic phosphors and quantum dots.
more »
« less
- PAR ID:
- 10594924
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- APL Materials
- Volume:
- 8
- Issue:
- 1
- ISSN:
- 2166-532X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Metal-halide perovskites, in particular their nanocrystal forms, have emerged as a new generation of light-emitting materials with exceptional optical properties, including narrow emissions covering the whole visible region with high photoluminescence quantum efficiencies of up to near-unity. Remarkable progress has been achieved over the last few years in the areas of materials development and device integration. A variety of synthetic approaches have been established to precisely control the compositions and microstructures of metal-halide perovskite nanocrystals (NCs) with tunable bandgaps and emission colors. The use of metal-halide perovskite NCs as active materials for optoelectronic devices has been extensively explored. Here, we provide a brief overview of recent advances in the development and application of metal-halide perovskite NCs. From color tuning via ion exchange and manipulation of quantum size effects, to stability enhancement via surface passivation, new chemistry for materials development is discussed. In addition, processes in optoelectronic devices based on metal-halide perovskite NCs, in particular, light-emitting diodes and radiation detectors, will be introduced. Opportunities for future research in metal-halide perovskite NCs are provided as well.more » « less
-
Abstract The all‐inorganic metal halide perovskite CsPbX3(X = Cl, Br, and I) has received extensive attention in the field of white light‐emitting diodes (WLEDs) due to its high luminous intensity and high color purity. However, the shortcoming of poor stability directly affects the luminous performance of the WLED devices and reduces their luminous efficiency, which has become an urgent problem to be solved. Here, three‐color lead halide perovskite phosphors (blue‐emitting CsPbBr3synthesized at 20 °C (CPB‐20), green‐emitting CsPbBr3‐80 (CPB‐80)/CsPbBr3:SCN−(CPB:SCN−), and red‐emitting PEA2PbBr4(PPB)/PEA2PbBr4:Mn2+(PPB:Mn2+)) with higher stability and luminous intensity are simultaneously prepared and applied in WLEDs. Density functional theory is used to optimize the structures of CsPbBr3and PEA2PbBr4, and to calculate the work function, optical properties, and charge density difference. Not only the WLED devices with three‐color lead halide perovskite phosphors are constructed, but also WLED devices from warm white to cold white are realized by tuning the ratio of the different emissions, and a superior color quality (color rendering index of 96) and ideal correlated color temperature (CCT of 9376 K) are achieved. This work will set the stage for exploring low‐cost, environmentally friendly, high‐performance WLEDs.more » « less
-
Abstract Metal halide perovskites have drawn tremendous attention in optoelectronic applications owing to the rapid development in photovoltaic and light‐emitting diode devices. More recently, these materials are demonstrated as excellent gain media for laser applications due to their large absorption coefficient, low defect density, high charge carrier mobility, long carrier diffusion length, high photoluminescence quantum yield, and low Auger recombination rate. Despite the great progress in laser applications, the development of perovskite lasers is still in its infancy and the realization of electrically pumped lasers has not yet been demonstrated. To accelerate the development of perovskite‐based lasers, it is important to understand the fundamental photophysical characteristics of perovskite gain materials. Here, the structure and gain behavior in various perovskite materials are discussed. Then, the effects of charge carrier dynamics and electron–phonon interaction on population inversion in different types of perovskite materials are analyzed. Further, recent advances in perovskite‐based lasers are also highlighted. Finally, a perspective on perovskite material design is presented and the remaining challenges of perovskite lasers are discussed.more » « less
-
Metal halide perovskites have emerged as the next generation of light emitting semiconducting materials due to their excellent properties such as tunable bandgaps, high photoluminescence quantum yield, and high color purity. Nickel oxide is a hole transport material that has been used in planar light emitting diodes (LEDs). In this paper, we develop a novel method for the large scale fabrication of metal halide perovskite nanowire arrays encapsulated inside nickel oxide nanotubes. We study the structural and spectral properties of these infiltrated perovskites nanowires and, to the best of our knowledge, for the first time report on a working LED device consisting of perovskites encapsulated inside nickel oxide nanotubes. Finally, we study the photoluminescence and electroluminescence of an LED with MAPbBr 3 inside nickel oxide nanotubes and obtain an outstanding current efficiency of 5.99 Cd A −1 and external quantum efficiency of 3.9% for the LED device.more » « less
