An official website of the United States government
Half-metallic Heusler compounds have been extensively studied in the recent years, both experimentally and theoretically, for potential applications in spin-based electronics. Here, we present the results of a combined theoretical and experimental study of the quaternary Heusler compound NiFeMnAl. Our calculations indicate that this material is half-metallic in the ground state and maintains its half-metallic electronic structure under a considerable range of external hydrostatic pressure and biaxial strain. NiFeMnAl crystallizes in the regular cubic Heusler structure, and exhibits ferromagnetic alignment. The practical feasibility of the proposed system is confirmed in the experimental section of this work. More specifically, a bulk ingot of NiFeMnAl was synthesized in A2 type disordered cubic structure using arc melting. It shows a high Curie temperature of about 468 K and a saturation magnetization of 2.3 μ_B⁄(f.u). The measured magnetization value is smaller than the one calculated for the ordered structure. This discrepancy is likely due to the A2 type atomic disorder, as demonstrated by our calculations. We hope that the presented results may be useful for researchers working on practical applications of spin-based electronics.
more »
« less
Electronic band structure and magnetism of CoFeV0.5Mn0.5Si
Half-metallic Heusler alloys have attracted significant attention due to their potential application in spin-transport-based devices. We have synthesized one such alloy, CoFeV0.5Mn0.5Si, using arc melting and high-vacuum annealing at 600 °C for 24 hours. First principles calculation indicates that CoFeV0.5Mn0.5Si shows a nearly half-metallic band structure with a degree of spin polarization of about 93%. In addition, this value can be enhanced by the application of tensile strain. The room temperature x-ray diffraction patterns are indexed with the cubic crystal structure without secondary phases. The annealed sample shows ferromagnetic order with the Curie temperature well above room temperature (Tc = 657 K) and a saturation magnetization of about 92 emu/g. Our results indicate that CoFeV0.5Mn0.5Si has a potential for room temperature spin-transport-based devices.
more »
« less
- PAR ID:
- 10597299
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- AIP Advances
- Volume:
- 12
- Issue:
- 3
- ISSN:
- 2158-3226
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Magnetic skyrmions are topologically nontrivial chiral spin textures that have potential applications in next‐generation energy‐efficient and high‐density spintronic devices. In general, the chiral spins of skyrmions are stabilized by the noncollinear Dzyaloshinskii–Moriya interaction (DMI), originating from the inversion symmetry breaking combined with the strong spin–orbit coupling (SOC). Here, the strong SOC from topological insulators (TIs) is utilized to provide a large interfacial DMI in TI/ferrimagnet heterostructures at room temperature, resulting in small‐size (radius ≈ 100 nm) skyrmions in the adjacent ferrimagnet. Antiferromagnetically coupled skyrmion sublattices are observed in the ferrimagnet by element‐resolved scanning transmission X‐ray microscopy, showing the potential of a vanishing skyrmion Hall effect and ultrafast skyrmion dynamics. The line‐scan spin profile of the single skyrmion shows a Néel‐type domain wall structure and a 120 nm size of the 180° domain wall. This work demonstrates the sizable DMI and small skyrmions in TI‐based heterostructures with great promise for low‐energy spintronic devices.more » « less
-
For applications such as spin accumulation sensors for next-generation hard disk drive read heads, and for fundamental research, it is desirable to increase the spin signal in metallic non-local spin valves, which are central devices in spintronics. To this end, here, we report on the integration of high-spin-polarization Co–Fe binary alloy ferromagnetic injectors and detectors in Al-based non-local spin valves. Room-temperature deposition on amorphous substrates from an alloy target is shown to generate smooth, polycrystalline (110-textured), solid-solution body-centered-cubic Co75Fe25 films, which we characterize by energy dispersive x-ray spectroscopy, x-ray diffraction, x-ray reflectivity, atomic force microscopy, and electronic transport. Simple integration into transparent-interface Al non-local spin valves is then shown to realize up to a factor of ∼5 enhancement of the spin signal relative to Co, with full quantitative analysis yielding strikingly temperature-independent current spin polarizations exceeding 60%. We make a detailed quantitative comparison of these values with prior literature, concluding that Co–Fe alloys present a remarkably facile route to higher spin polarization and spin signals in non-local spin valves, with minimal barrier to adoption.more » « less
-
Abstract Liquid metals (LMs) have compelling applications in stretchable electronics, wearable devices, and soft robotics ascribing to the unique combination of room temperature fluidity and metallic electrical/thermal conductivity. Adding metallic elements in gallium‐based LMs can produce heterophasic (i.e., solid and liquid) LMs with altered properties including morphology, surface energy, rheology, electrical/thermal conductivity, and chemical reactivity. Importantly, heterophasic LMs can respond to external stimuli such as magnetic fields, temperature, and force. Thus, heterophasic LMs can broaden the potential applications of LMs. This report reviews the recent progress about heterophasic LMs through metallic elements in the periodic table and discusses their functionalities. The heterophasic LMs are systematically organized into four categories based on their features and applications including electrical/thermal conductivity, magnetic property, catalysis/energy management, and biomedical applications. This comprehensive review is aimed to help summarize the field and identify new opportunities for future studies.more » « less
-
Magnetic tunnel junction (MTJ) can serve as an excellent testbed for connecting Molecule between two ferromagnetic electrodes. A paramagnetic molecule covalently bonded to two ferromagnetic electrodes with two thiol functional groups can produce intriguing transport and magnetic properties. We have chemically bonded paramagnetic molecules between two ferromagnetic electrodes of a MTJ along the exposed side edges. In this paper we discussed the observation of Molecule induced dramatic changes in the magnetic and transport properties of the conventional magnetic tunnel junctions. Paramagnetic molecules were chemically bonded to ferromagnetic electrodes to bridge them across the insulating spacer along the exposed edges. Paramagnetic molecular channels along the tunnel junction edges decreased the overall current, through tunnel barrier and molecular channels, > 5 orders of magnitude below the leakage current of the bare tunnel junction at room temperature. These molecules caused significant changes in the spin density of states due to potential spin filtering effect. Also, paramagnetic molecules produced antiferromagnetic coupling between the affected magnetic electrodes. In this state spin transport in the magnetic tunnel junction based molecular devices plummeted by several orders. It is also noteworthy that our experimental studies provide a platform to connect a vast variety of ferromagnetic leads to the even broader array of high potential molecules such as single molecular magnets, porphyrin, and single ion molecules. The strength of exchange coupling between ferromagnetic electrodes and molecules can be tailored by utilizing different tethers and terminal functional groups. The MTJMSD can provide an advanced form of logic and memory devices, including a testbed for the Molecule based quantum computation devices. Future study about the interaction between molecular magnets and ferromagnets and interaction of thiol ended alkanes with ferromagnets will be of very valuable. This study indicates the potential of magnetic molecules as a mean to transforming conventional magnetic tunnel junctions and producing unprecedented magnetic and transport properties.more » « less
