An official website of the United States government
Environmental regulatory agencies have implemented stringent restrictions on the permissible levels of sulfur compounds in fuel to reduce harmful emissions and improve air quality. Problematically, traditional desulfurization methods have shown low effectiveness in the removal of refractory sulfur compounds, e.g., thiophene (TS), dibenzothiophene (DBT), and 4-methyldibenzothiophene (MDBT). In this work, molecular dynamics (MD) simulations and free energy perturbation (FEP) have been applied to investigate the use of ionic liquids (ILs) and deep eutectic solvents (DESs) as efficient TS/DBT/MDBT extractants. For the IL simulations, the selected cation was 1-butyl-3-methylimidazolium [BMIM], and the anions included chloride [Cl], thiocyanate [SCN], tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethylsulfonyl)amide [NTf2]. The DESs were composed of choline chloride with ethylene glycol (CCEtg) or with glycerol (CCGly). Calculation of excess chemical potentials predicted the ILs to be more promising extractants with energies lower by 1-3 kcal/mol compared to DESs. Increasing IL anion size was positively correlated to enhanced solvation of S-compounds, which was influenced by energetically dominant solute-anion interactions and favorable solute-[BMIM] pi-pi stacking. For the DESs, the solvent components offered a range of synergistic, yet comparatively weaker electrostatic interactions that included hydrogen bonding and cation-pi interactions. An in-depth analysis of the structure of IL and DES systems is presented, along with a discussion of the critical factors behind experimental trends of S-compound extraction efficiency.
more »
« less
Monte Carlo QM/MM simulation studies of the Cannizzaro reaction in ionic liquids for improved biofuel production
The conversion of biomass to 5-hydroxymethylfurfural (HMF) holds substantial promise as a renewable energy source. Notably, HMF can be transformed into 2,5-bis(hydroxymethyl)furan (BHMF), a crucial reactant in biofuel production, but requires harsh operating conditions, H2, and precious metal catalysts. A recently reported Cannizzaro reaction of HMF to BHMF, characterized by its efficiency, mild conditions, and eco-friendliness, instead employed ionic liquids (ILs) to achieve high yields. In this study, combined quantum mechanical and molecular mechanical (QM/MM) simulations in conjunction with Metropolis Monte Carlo statistical mechanics and free-energy perturbation theory utilized M06-2X/6-31+G(d), PDDG/PM3, and the OPLS-VSIL force field to uncover important solute–solvent interactions present in the HMF to BHMF reaction pathway. The Cannizzaro reaction was examined in water and in five ILs composed of the 1-butyl-3-methylimidazolium [BMIM] cation coupled to hexafluorophosphate, tetrafluoroborate, thiocyanate, chloride, and bromide. Energetic and structural analysis of the rate-determining hydride transfer between HMF and the hydride-donor anion HMFOH− attributed the enhanced reactivity to highly organized solvent interactions featuring (1) hydrogen bonding between the ring protons of [BMIM] and the negatively charged carbonyl oxygen atoms on the transition structure, (2) favorable electrostatic interactions between the IL anions and solute hydroxyl groups, and (3) beneficial π–π stacking interactions between [BMIM] and the two aromatic rings present in HMF and HMFOH−.
more »
« less
- Award ID(s):
- 2102038
- PAR ID:
- 10597678
- Publisher / Repository:
- AIP Publishing
- Date Published:
- Journal Name:
- The Journal of Chemical Physics
- Volume:
- 161
- Issue:
- 8
- ISSN:
- 0021-9606
- Page Range / eLocation ID:
- 084117
- Subject(s) / Keyword(s):
- Quantum mechanical/molecular mechanical calculations Free energy perturbation Biomass energy sources Biofuel production and utilization Computer simulation Ionic liquids Reaction mechanisms Catalysts and Catalysis Chemical bonding Statistical mechanics
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Biomass is abundant, inexpensive and renewable, therefore, it is highly expected to play a significant role in our future energy and chemical landscapes. The US DOE has identified furanic compounds (furfural and 5-(hydroxymethyl)furfural (HMF)) as the top platform building-block chemicals that can be readily derived from biomass sources [1]. Electrocatalytic conversion of these furanic compounds is an emerging route for the sustainable production of valuable chemicals [2, 3]. In my presentation, I will first present our recent mechanistic study of electrochemical reduction of furfural through a combination of voltammetry, preparative electrolysis, thiol-electrode modifications, and kinetic isotope studies [4]. It is demonstrated that two distinct mechanisms are operable on metallic Cu electrodes in acidic electrolytes: (i) electrocatalytic hydrogenation (ECH) and (ii) direct electroreduction. The contributions of each mechanism to the observed product distribution are clarified by evaluating the requirement for direct chemical interactions with the electrode surface and the role of adsorbed hydrogen. Further analysis reveals that hydrogenation and hydrogenolysis products are generated by parallel ECH pathways. Understanding the underlying mechanisms enables the manipulation of furfural reduction by rationally tuning the electrode potential, electrolyte pH, and furfural concentration to promote selective formation of important bio-based polymer precursors and fuels. Next, I will present electrocatalytic conversion of HMF to two biobased monomers in an H-type electrochemical cell [5]. HMF reduction (hydrogenation) to 2,5-bis(hydroxymethyl)furan (BHMF) was achieved under mild electrolyte conditions and ambient temperature using a Ag/C cathode. Meanwhile, HMF oxidation to 2,5-furandicarboxylic acid (FDCA) with ~100% efficiency was facilitated under the same conditions by a homogeneous nitroxyl radical redox mediator, together with an inexpensive carbon felt anode. The selectivity and efficiency for Ag-catalyzed BHMF formation were sensitive to cathode potential, owing to competition from HMF hydrodimerization reactions and water reduction (hydrogen evolution). Moreover, the carbon support of Ag/C was active for HMF reduction and contributed to undesired dimer/oligomer formation at strongly cathodic potentials. As a result, high BHMF selectivity and efficiency were only achieved within a narrow potential range near –1.3 V. Fortunately, the selectivity of redox-mediated HMF oxidation was insensitive to anode potential, thus allowing HMF hydrogenation and oxidation half reactions to be performed together in a single cathode-potential-controlled cell. Electrocatalytic HMF conversion in a paired cell achieved high molar yields of BHMF and FDCA, and nearly doubled electron efficiency compared to the unpaired cell. Finally, I will briefly introduce our recent work on the development of a three-electrode flow cell with an oxide-derived Ag (OD-Ag) cathode and catbon felt anode for paring elecatalytic oxidation and reduction of HMF. The flow cell has a remarkable cell voltage reduction from ~7.5 V to ~2.0 V by transferring the electrolysis from the H-type cell to the flow cell [6]. This represents a more than fourfold increase in the energy efficiency at the 10 mA operation. A combined faradaic efficiency of 163% was obtained to BHMF and FDCA. Alternatively, the anodic hydrogen oxidation reaction on platinum further reduced the cell voltage to only ~0.85 V at 10 mA operation. These paired processes have shown potential for integrating renewable electricity and carbon for distributed chemical manufacturing in the future.more » « less
-
Electrocatalytic upgrading of biomass-derived feedstocks driven by renewable electricity offers a greener way to reduce the global carbon footprint associated with the production of value-added chemicals. Paired electrolysis is an emerging platform for cogenerating high-valued chemicals from both the cathode and anode, potentially powered by renewable electricity from wind or solar sources. By pairing with an anodic biomass oxidation upgrading reaction, the elimination of the sluggish and less valuable water oxidation increases flow cell productivity and efficiency. In this presentation, we report our research progress on paired electrolsysis of HMF to production of higher valued chemicals in electrochemical flow cells. We first prepared an oxide-derived Ag (OD-Ag) electrode with high activity and up to 98.2% selectivity for the ECH of 5-(hydroxymethyl)furfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF), and such efficient conversion was achieved in a three-electrode flow cell. The excellent BHMF selectivity was maintained over a broad potential range with long-term operational stability. In HMF-to-BHMF paired with 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated HMF-to-FDCA conversion, a markedly reduced cell voltage from ~7.5 V to ~2.0 V was observed by transferring the electrolysis from the H-type cell to the flow cell, corresponding to more than four-fold increase in energy efficiency in operation at 10 mA. A combined faradaic efficiency of 163% was obtained to BHMF and FDCA. Alternatively, the anodic hydrogen oxidation reaction on platinum further reduced the cell voltage to only ~0.85 V at 10 mA. Next, we have demonstrated membrane electrode assembly (MEA)-based flow cells for the paired electrolysis of 5-(hydroxymethyl)furfural (HMF) paired electrolysis to bis(hydroxymethyl)furan (BHMF) and 2,5-furandicarboxylic acid (FDCA). In this work, the oxygen evolution reaction (OER) was substituted by TEMPO-mediated HMF oxidation, dropping the cell voltage was from 1.4 V to 0.7 V at a current density of 1.0 mA cm−2. A minimized cell voltage of ~1.5 V for a continuous 24 h co-electrolysis of HMF was then achieved at the current density of 2 mA cm−2(constant current of 10 mA), leading to the highest combined faradaic efficiency (FE) of 139% for HMF-to-BHMF and HMF-to-FDCA. A NiFe oxide catalyst on carbon cloth further replaced the anodic TEMPO mediator for HMF paired electrolysis in a pH-asymmetric flow cell. We envision renewable electrical energy can potentially drive the whole process, thus providing a sustainable avenue towards distributed, scalable, and energy-efficient electrosynthesis.more » « less
-
null (Ed.)Electrocatalytic upgrading of biomass-derived feedstocks driven by renewable electricity offers a greener way to reduce the global carbon footprint associated with the production of value-added chemicals. In this respect, a key strategy is the electrocatalytic hydrogenation (ECH) reaction, which is typically paired with the anodic oxygen evolution reaction (OER) with sluggish kinetics, producing O 2 with little value. Here we prepared an oxide-derived Ag (OD-Ag) electrode with high activity and up to 98.2% selectivity for the ECH of 5-(hydroxymethyl)furfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF), and such efficient conversion was achieved in a three-electrode flow cell. The excellent BHMF selectivity was maintained over a broad potential range with long-term operational stability. We then considered the oxidation of HMF to 2,5-furandicarboxylic acid (FDCA) and hydrogen (to water) as more efficient and productive alternatives to the OER. In HMF-to-BHMF paired with 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated HMF-to-FDCA conversion, a markedly reduced cell voltage from ∼7.5 V to ∼2.0 V was observed by transferring the electrolysis from the H-type cell to the flow cell, corresponding to more than four-fold increase in energy efficiency in operation at 10 mA. A combined faradaic efficiency of 163% was obtained for BHMF and FDCA. Alternatively, the anodic hydrogen oxidation reaction on platinum further reduced the cell voltage to only ∼0.85 V at 10 mA. These paired processes show the potential for integration of renewable electricity and carbon for green and economically feasible distributed chemical manufacturing.more » « less
-
High-level quantum chemical computations have provided significant insight into the fundamental physical nature of non-covalent interactions. These studies have focused primarily on gas-phase computations of small van der Waals dimers; however, these interactions frequently take place in complex chemical environments, such as proteins, solutions, or solids. To better understand how the chemical environment affects non-covalent interactions, we have undertaken a quantum chemical study of π– π interactions in an aqueous solution, as exemplified by T-shaped benzene dimers surrounded by 28 or 50 explicit water molecules. We report interaction energies (IEs) using second-order Møller–Plesset perturbation theory, and we apply the intramolecular and functional-group partitioning extensions of symmetry-adapted perturbation theory (ISAPT and F-SAPT, respectively) to analyze how the solvent molecules tune the π– π interactions of the solute. For complexes containing neutral monomers, even 50 explicit waters (constituting a first and partial second solvation shell) change total SAPT IEs between the two solute molecules by only tenths of a kcal mol −1 , while significant changes of up to 3 kcal mol −1 of the electrostatic component are seen for the cationic pyridinium–benzene dimer. This difference between charged and neutral solutes is attributed to large non-additive three-body interactions within solvated ion-containing complexes. Overall, except for charged solutes, our quantum computations indicate that nearby solvent molecules cause very little “tuning” of the direct solute–solute interactions. This indicates that differences in binding energies between the gas phase and solution phase are primarily indirect effects of the competition between solute–solute and solute–solvent interactions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0222092
