skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Enhanced Modeling of Twisted String Actuators with Low-Torque Motors Accounting for Strings’ Friction and Opposing Torque

This content will become publicly available on July 31, 2026

Title: Enhanced Modeling of Twisted String Actuators with Low-Torque Motors Accounting for Strings’ Friction and Opposing Torque
Twisted string actuators (TSAs) have shown strong promise in emerging applications, such as soft robotics and assistive robotics. To construct compact and lightweight TSAs, it is often inevitable to use low-torque and low-speed motors. An accurate TSA model can facilitate the appropriate design of motor-string components and enable TSA’s reliable operation. However, existing models often neglect the twisted strings’ friction and the exerted opposing torque on the motor, which would result in significant discrepancies in predicting the dynamic behaviors of TSAs with low-torque and low-speed motors. This work presents an enhanced model to accurately capture TSA’s dynamics by accounting for the aforementioned phenomena. The theory of torsional closed-wrapped helical springs is used to capture the friction between the twisted strings. The total elastic potential energy of the strings considering string curvature is used to derive the total opposing torque exerted by the twisted strings. The proposed model is experimentally identified, validated, and compared with an existing TSA model to confirm its superior accuracy.  more » « less
Award ID(s):
2348697
PAR ID:
10598498
Author(s) / Creator(s):
;
Publisher / Repository:
Proceedings of the 2025 American Control Conference (ACC)
Date Published:
Format(s):
Medium: X
Location:
Denver, CO, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Proceedings of the IEEE Conference of Intelligent Robots and Systems)
    null (Ed.)
    Recently, brushless motors with especially high torque densities have been developed for applications in autonomous aerial vehicles (i.e. drones), which usually employ exterior rotortype geometries (ER-BLDC motors). These motors are promising for other applications, such as humanoids and wearable robots; however, the emerging companies that produce motors for drone applications do not typically provide adequate technical specifications that would permit their general use across robotics-for example, the specifications are often tested in unrealistic forced convection environments, or are drone-specific, such as thrust efficiency. Furthermore, the high magnetic pole count in many ER-BLDC motors restricts the brushless drives able to efficiently commutate these motors at speeds needed for lightly-geared operation. This paper provides an empirical characterization of a popular ER-BLDC motor and a new brushless drive, which includes efficiencies of the motor across different power regimes, identification of the motor transfer function coefficients, thermal response properties, and closed loop control performance in the time and frequency domains. The intent of this work is to serve as a benchmark and reference for other researchers seeking to utilize these exciting and emerging motor geometries. 
    more » « less
  2. ; ; ; (, IEEE Transactions on Robotics)
    In this article, we present the design of a powered knee–ankle prosthetic leg, which implements high-torque actuators with low-reduction transmissions. The transmission coupled with a high-torque and low-speed motor creates an actuator with low mechanical impedance and high backdrivability. This style of actuation presents several possible benefits over modern actuation styles in emerging robotic prosthetic legs, which include free-swinging knee motion, compliance with the ground, negligible unmodeled actuator dynamics, less acoustic noise, and power regeneration. Benchtop tests establish that both joints can be backdriven by small torques ( ∼ 1–3 N ⋅ m) and confirm the small reflected inertia. Impedance control tests prove that the intrinsic impedance and unmodeled dynamics of the actuator are sufficiently small to control joint impedance without torque feedback or lengthy tuning trials. Walking experiments validate performance under the designed loading conditions with minimal tuning. Finally, the regenerative abilities, low friction, and small reflected inertia of the presented actuators reduced power consumption and acoustic noise compared to state-of-the-art powered legs. 
    more » « less
  3. ; (, IEEE/ASME Transactions on Mechatronics)
    The robotic spine has a lot of potential for snake-like, quadruped, and humanoid robots, as it can improve their mobility, flexibility, and overall function. A common approach to developing an articulated spine uses geared motors to imitate vertebrae. Instead of using geared motors that rotate 360 degree, a bioinspired gearless electromechanical actuator was proposed and developed as an alternative, specifically for humanoid spine applications. The actuator trades off angular flexibility for torque, while the geared motor trades off speed for torque. This article compares the proposed actuator and conventional geared motors regarding torque, acceleration, and copper loss for a vertebra's angular flexibility. When its angular flexibility is lower than 14∘, the proposed actuator achieves higher torque capability without gears than with conventional motors. Lower angular flexibility, which means smaller airgaps, allows the proposed actuator to produce a much stronger torque for the same input power. The actuator's nonlinear electrical and mechanical dynamics models are developed and used for position control of a six-module distributed spine. In addition, two different position-control architectures are developed: an outer loop proportional-integral (PI) position controller with an inner loop PI current controller and an outer loop PI position controller with an inner loop PI torque controller. 
    more » « less
  4. ; ; ; ; (, Bioinspiration & Biomimetics)
    Abstract Jumping microrobots and insects power their impressive leaps through systems of springs and latches. Using springs and latches, rather than motors or muscles, as actuators to power jumps imposes new challenges on controlling the performance of the jump. In this paper, we show how tuning the motor and spring relative to one another in a torque reversal latch can lead to an ability to control jump output, producing either tuneable (variable) or stereotyped jumps. We develop and utilize a simple mathematical model to explore the underlying design, dynamics, and control of a torque reversal mechanism, provides the opportunity to achieve different outcomes through the interaction between geometry, spring properties, and motor voltage. We relate system design and control parameters to performance to guide the design of torque reversal mechanisms for either variable or stereotyped jump performance. We then build a small (356 mg) microrobot and characterize the constituent components (e.g. motor and spring). Through tuning the actuator and spring relative to the geometry of the torque reversal mechanism, we demonstrate that we can achieve jumping microrobots that both jump with different take-off velocities given the actuator input (variable jumping), and those that jump with nearly the same take-off velocity with actuator input (stereotyped jumping). The coupling between spring characteristics and geometry in this system has benefits for resource-limited microrobots, and our work highlights design combinations that have synergistic impacts on output, compared to others that constrain it. This work will guide new design principles for enabling control in resource-limited jumping microrobots. 
    more » « less
  5. ; ; ; ; (, IEEE)
    While numerous studies have been conducted, developing a compliant robotic gripper capable of replicating human hand grasping and manipulation capabilities is still challenging. This paper presents the design, fabrication, and preliminary testing of an anthropomorphic soft robotic gripper driven by twisted string actuators (TSAs). Termed as STAR–2, it is a second generation TSA-driven soft gripper from the Smart Robotics Laboratory at the University of Nevada, Reno. The novel design facilitated a monolithic structure comprising of a 3-degrees-of-freedom (DOF) thumb and four fingers each with 2-DOFs. On account of using tendon-based actuation and the large footprint required for the thumb, the design employed meticulously planned tendon routing within the monolithic structure. Preliminary results showed STAR–2’s enhanced ability to demonstrate grasp taxonomies and dexterity over STAR–1. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email