skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on February 6, 2026

Title: Enhancing Thermal Transport in Polymeric Composites Via Engineered Noncovalent Filler–Polymer Interactions
Abstract Understanding thermal transport mechanisms in polymeric composites allows us to expand the boundaries of thermal conductivity in them, either increasing it for more efficient heat dissipation or decreasing it for better thermal insulation. But, these mechanisms are not fully understood. Systematic experimental investigations remain limited. Practical strategies to tune the interfacial thermal resistance (ITR) between fillers and polymers and the thermal conductivity of composites remain elusive. Here, we studied the thermal transport in representative polymer composites, using polyethylene (PE) or polyaniline (PANI) as matrices and graphite as fillers. PANI, with aromatic rings in its backbone, interacts with graphite through strong noncovalent π–π stacking interactions, whereas PE lacks such interactions. We can then quantify how π–π stacking interactions between graphite and polymers enhance thermal transport in composites. PE/graphite and PANI/graphite composites with the same 1.5% filler volume fractions show a ∼22.82% and ∼34.85% enhancement in thermal conductivity compared to pure polymers, respectively. Calculated ITRs in PE/graphite and PANI/graphite are ∼6×10−8 m2 K W−1 and ∼1×10−8 m2 K W−1, respectively, highlighting how π–π stacking interactions reduce ITR. Molecular dynamics (MD) simulations suggest that π–π stacking interactions between PANI chains and graphite surfaces enhance alignment of PANI's aromatic rings with graphite surfaces. This allows more carbon atoms from PANI chains to interact with graphite surfaces at a shorter distance compared to PE chains. Our work indicates that tuning the π–π stacking interactions between polymers and fillers is an effective approach to reduce the ITR and enhance the thermal conductivity of composites.  more » « less
Award ID(s):
2312559
PAR ID:
10600766
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
ASME Journal of Heat and Mass Transfer
Date Published:
Journal Name:
ASME Journal of Heat and Mass Transfer
Volume:
147
Issue:
3
ISSN:
2832-8450
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, The Journal of Physical Chemistry B)
    For heat conduction along polymer chains, a decrease in the axial thermal conductivity often occurs when the polymer structure changes from one-dimensional (1D) to three-dimensional (3D). For example, a single extended aliphatic chain (e.g., polyethylene or poly(dimethylsiloxane)) usually has a higher axial thermal conductivity than its double-chain or crystal counterparts because coupling between chains induces strong interchain anharmonic scatterings. Intuitively, for chains with an aromatic backbone, the even stronger π–π stacking, once formed between chains, should enhance thermal transport across chains and suppress the thermal conductivity along the chains. However, we show that this trend is the opposite in poly(p-phenylene) (PPP), a typical chain with an aromatic backbone. Using molecular dynamics simulations, we found that the axial thermal conductivity of PPP chains shows an anomalous dimensionality dependence where the thermal conductivity of double-chain and 3D crystal structures is higher than that of a 1D single chain. We analyzed the probability distribution of dihedral angles and found that π–π stacking between phenyl rings restricts the free rotation of phenyl rings and forms a long-range order along the chain, thus enhancing thermal transport along the chain direction. Though possessing a stronger bonding strength and stabilizing the multiple-chain structure, π–π stacking does not lead to a higher interchain thermal conductance between phenyl rings compared with that between aliphatic chains. Our simulation results on the effects of π–π stacking provide insights to engineer thermal transport in polymers at the molecular level. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Science Advances)
    To push upper boundaries of thermal conductivity in polymer composites, understanding of thermal transport mechanisms is crucial. Despite extensive simulations, systematic experimental investigation on thermal transport in polymer composites is limited. To better understand thermal transport processes, we design polymer composites with perfect fillers (graphite) and defective fillers (graphite oxide), using polyvinyl alcohol (PVA) as a matrix model. Measured thermal conductivities of ~1.38 ± 0.22 W m−1K−1in PVA/defective filler composites is higher than those of ~0.86 ± 0.21 W m−1K−1in PVA/perfect filler composites, while measured thermal conductivities in defective fillers are lower than those of perfect fillers. We identify how thermal transport occurs across heterogeneous interfaces. Thermal transport measurements, neutron scattering, quantum mechanical modeling, and molecular dynamics simulations reveal that vibrational coupling between PVA and defective fillers at PVA/filler interfaces enhances thermal conductivity, suggesting that defects in polymer composites improve thermal transport by promoting this vibrational coupling. 
    more » « less
  3. ; ; (, Nanoscale)
    Two-dimensional (2D) polymers are organic analogues of graphene. Compared to graphene, 2D polymers offer a higher degree of tunability in regards to structure, topology, and physical properties. The thermal transport properties of 2D polymers play a crucial role in their applications, yet remain largely unexplored. Using the equilibrium molecular dynamics method, we study the in-plane thermal conductivity of dubbed porous graphene that is comprised of π-conjugated phenyl rings. In contrast to the conventional notion that π-conjugation leads to high thermal conductivity, we demonstrate, for the first time, that π-conjugated 2D polymers can have either high or low thermal conductivity depending on their porosity and structural orientation. The underlying mechanisms that govern thermal conductivity were illustrated through phonon dispersion. The ability to achieve two orders of magnitude variance in thermal conductivity by altering porosity opens up exciting opportunities to tune the thermal transport properties of 2D polymers for a diverse array of applications. 
    more » « less
  4. ; ; ; ; ; (, Small Science)
    Stretchable conductive composites (SCCs) are generally elastomer matrices filled with conductive fillers. They combine the conductivity of metals and carbon materials with the flexibility of polymers, which are attractive properties for applications such as stretchable electronics, wearable devices, and flexible sensors. Most conventional conductive composites that are filled with only one type of conductive filler face issues in mechanical and electrical properties. Recently, some studies introduced secondary fillers to create hybrid‐filler SCCs to solve these problems. The secondary fillers produce a synergistic effect with the primary fillers to enhance the electrical conductivity of the composites. They also improve the thermal conductivity and mechanical properties or impart composites with special functions like catalysis and self‐healing. Herein, the fabrication methods, stretchability enhancement strategies, and piezoresistivity of SCCs are analyzed, and their latest applications in stretchable electronics are introduced. Finally, the challenges and prospects of their development are discussed. 
    more » « less
  5. ; ; ; (, ACS Applied Polymer Materials)
    A mussel-inspired mechanism was used to solve the problem of filler aggregation in rubber composites. This research aims to improve carbon black (CB) dispersion in epoxidized natural rubber (ENR) composites through π−π stacking and cation−π interactions by adding dopamine (D). In this study, various aromatic interactions (π−π stacking and cation−π interactions) between the D-functionalized ENR molecules and the surface of the CB were observed by Fourier transform infrared (FTIR) and Raman spectroscopy. Notably, the small and wideangle X-ray scattering (SAXS/WAXS) analyses supported our inference from the rubber processing analysis (RPA) and transmission electron microscopy (TEM) results that the aromatic interactions enhanced the CB dispersion in ENR composites. This phenomenon improved the tensile strength (138%), Young’s modulus (93%), and energy-saving properties (50%). Finally, this research provided an alternative strategy using mussel-inspired material to solve the CB aggregation problem in rubber products, yielding ENR composites with superior performance properties. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email