An official website of the United States government
Abstract To study the microstructural evolution of polymineralic rocks, we performed deformation experiments on two‐phase aggregates of olivine (Ol) + ferropericlase (Per) with periclase fractions (fPer) between 0.1 and 0.8. Additionally, single‐phase samples of both Ol and Per were deformed under the same experimental conditions to facilitate comparison of the microstructures in two‐phase and single‐phase materials. Each sample was deformed in torsion atT = 1523 K,P = 300 MPa at a constant strain rate up to a final shear strain of γ = 6 to 7. Microstructural developments, analyzed via electron backscatter diffraction (EBSD), indicate differences in both grain size and crystalline texture between single‐ and two‐phase samples. During deformation, grain size approximately doubled in our single‐phase samples of Ol and Per but remained unchanged or decreased in two‐phase samples. Zener‐pinning relationships fit to the mean grain sizes in each phase for samples with 0.1 ≤ fPer≤ 0.5 and for those with 0.8 ≥ fPer ≥ 0.5 demonstrate that the grain size of the primary phase is controlled by phase‐boundary pinning. Crystallographic preferred orientations, determined for both phases from EBSD data, are significantly weaker in the two‐phase materials than in the single‐phase materials.
more »
« less
MicroProcSim: A Software for Simulation of Microstructure Evolution
Abstract Understanding the large deformation behavior of materials under external forces is crucial for reliable engineering applications. The mechanical properties of materials depend on their underlying microstructures, which change over time during deformation. Experimental observation of these processes is time-consuming and influenced by various conditions. Therefore, we developed , a physics-based simulation tool to replicate the deformation process of cubic microstructures. can predict the evolution of texture, represented by the orientation distribution function (ODF), over time under various loads and strain rates. This software package can be run on both Windows and Linux operating systems. Unlike conventional crystal plasticity finite element software, offers a distinct advantage by rapidly generating deformed textures, as it bypasses incorporating grain morphology. Furthermore, comparisons with existing experimental and computational studies on texture evolution have demonstrated that this software seamlessly replicates real-world material processing conditions through a simple modification of a single input matrix.
more »
« less
- Award ID(s):
- 2053929
- PAR ID:
- 10608772
- Publisher / Repository:
- Springer Science + Business Media
- Date Published:
- Journal Name:
- Integrating Materials and Manufacturing Innovation
- Volume:
- 14
- Issue:
- 3
- ISSN:
- 2193-9764
- Format(s):
- Medium: X Size: p. 303-319
- Size(s):
- p. 303-319
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Microstructure-sensitive materials design has become popular among materials engineering researchers in the last decade because it allows the control of material performance through the design of microstructures. In this study, the microstructure is defined by an orientation distribution function. A physics-informed machine learning approach is integrated into microstructure design to improve the accuracy, computational efficiency, and explainability of microstructure-sensitive design. When data generation is costly and numerical models need to follow certain physical laws, machine learning models that are domain-aware perform more efficiently than conventional machine learning models. Therefore, a new paradigm called the physics-informed neural network (PINN) is introduced in the literature. This study applies the PINN to microstructure-sensitive modeling and inverse design to explore the material behavior under deformation processing. In particular, we demonstrate the application of PINN to small-data problems driven by a crystal plasticity model that needs to satisfy the physics-based design constraints of the microstructural orientation space. For the first problem, we predict the microstructural texture evolution of copper during a tensile deformation process as a function of initial texturing and strain rate. The second problem aims to calibrate the crystal plasticity parameters of the Ti-7Al alloy by solving an inverse design problem to match the PINN-predicted final texture prediction and the experimental data.more » « less
-
The dynamic diamond anvil cell (dDAC) is a recently developed experimental platform that has shown promise for studying the behavior of materials at strain rates ranging from intermediate to quasi-static and shock compression regimes. Combining dDAC with time-resolved x-ray diffraction (XRD) in the radial geometry (i.e., with incident x-rays perpendicular to the axis of compression) enables the study of material properties such as strength, texture evolution, and deformation mechanisms. This work describes a radial XRD dDAC setup at beamline P02.2 (Extreme Conditions Beamline) at DESY’s PETRA III synchrotron. Time-resolved radial XRD data are collected for titanium, zirconium, and zircon samples, demonstrating the ability to study the strength and texture of materials at compression rates above 300 GPa/s. In addition, the simultaneous optical imaging of the DAC sample chamber is demonstrated. The ability to conduct simultaneous radial XRD and optical imaging provides the opportunity to characterize plastic strain and deviatoric strain rates in the DAC at intermediate rates, exploring the strength and deformation mechanisms of materials in this regime.more » « less
-
Microstructure-sensitive material design has become popular among materials engineering researchers in the last decade because it allows the control of material performance through the design of microstructures. In this study, the microstructure is defined by an orientation distribution function (ODF). A physics-informed machine learning approach is integrated into microstructure design to improve the accuracy, computational efficiency, and explainability of microstructure-sensitive design. When data generation is costly and numerical models need to follow certain physical laws, machine learning models that are domain-aware perform more efficiently than conventional machine learning models. Therefore, a new paradigm called Physics-Informed Neural Network (PINN) is introduced in the literature. This study applies the PINN to microstructure-sensitive modeling and inverse design to explore the material behavior under deformation processing. In particular, we demonstrate the application of PINN to small-data problems driven by a crystal plasticity model that needs to satisfy the physics-based design constraints of the microstructural orientation space. For the first problem, we predict the microstructural texture evolution of Copper during a tensile deformation process as a function of initial texturing and strain rate. The second problem aims to calibrate the crystal plasticity parameters of Ti-7Al alloy by solving an inverse design problem to match PINN-predicted final texture prediction and the experimental data.more » « less
-
Abstract Observation of thin sections of the WAIS (West Antarctic Ice Sheet) Divide ice core in cross-polarized light reveals a wealth of microstructures and textural characteristics indicative of strain and recovery in an anisotropic crystalline substance undergoing high-temperature plastic deformation. The appearance of abundant subgrain domains—relatively strain-free regions inside crystals (grains) surrounded by walls of dislocations across which small structural orientation changes occur—is particularly noticeable in the depth range associated with the brittle ice (∼650–1300 m). Here we describe a subgrain texture, not previously reported in ice, that resembles chessboard-pattern subgrains in β-quartz. This chessboard texture at WAIS Divide is strongly associated with the presence of bubbles. We hypothesize that chessboard-subgrain development may affect grain-size evolution, the fracture of ice cores recovered from the brittle ice zone and perhaps grain-boundary sliding as well.more » « less
