An official website of the United States government
Abstract Amphibole and pyroxenes are the main reservoirs of rare earth elements (REEs) in the lithospheric mantle that has been affected by hydrous metasomatism. In this study, we developed semi-empirical models for REE partitioning between orthopyroxene and amphibole and between clinopyroxene and amphibole. These models were formulated on the basis of parameterized lattice strain models of mineral-melt REE partitioning for orthopyroxene, clinopyroxene, and amphibole, and they were calibrated using major element and REE data of amphibole and pyroxenes in natural mantle samples from intraplate settings. The mineral-melt REE partitioning models suggest that amphibole is not in equilibrium with coexisting pyroxenes in the mantle samples and that the amphibole crystallized at a lower temperature than that of the pyroxenes. We estimated the apparent amphibole crystallization temperature using major element compositions of the amphibole and established temperature- and composition-dependent models that can be used to predict apparent pyroxene-amphibole REE partition coefficients for amphibole-bearing peridotite and pyroxenite from intraplate lithospheric mantle. Apparent pyroxene-amphibole REE partition coefficients predicted by the models can be used to infer REE contents of amphibole from REE contents of coexisting pyroxenes. This is especially useful when the grain size of amphibole is too small for trace element analysis.
more »
« less
Mineral, trace element, microthermometry and raman analysis of gabbroic xenoliths collected on the island of Floreana in the Southern Galápagos
Mineral and fluid inclusion data collected from a suite a gabbro xenoliths found on the island of Floreana in the southern Galapagos. Mineral chemistry is primarily determined by SEM-based EDS and WDS analysis with LA ICP-MS used to determine the clinopyroxene trace element contents. Microthermometry and Raman analysis are used to assess the composition and CO2 density of clinopyroxene and plagioclase hosted fluid inclusions.
more »
« less
- Award ID(s):
- 2218698
- PAR ID:
- 10609839
- Publisher / Repository:
- Interdisciplinary Earth Data Alliance (IEDA)
- Date Published:
- Subject(s) / Keyword(s):
- Regional (Continents, Oceans) Galápagos, Xenoliths, Thermobarometry, Fluid Incluions, Gabbro
- Format(s):
- Medium: X Other: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
- Location:
- Isla Floreana, Galápagos; (Latitude:-1.26237; Longitude:-90.3704); (Latitude:-1.26183; Longitude:-90.3709); (Latitude:-1.23375; Longitude:-90.42567)
- Right(s):
- Creative Commons Attribution-ShareAlike 4.0 International [CC-BY-SA-4.0]
- Institution:
- University of California, Berkeley
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Mineral dissolution releases ions into fluids and alters pore structures, affecting geochemistry and subsurface fluid flow. Thus, mineral dissolution plays a crucial role in many subsurface processes and applications. Pore‐scale fluid flow often controls mineral dissolution by controlling concentration gradients at fluid‐solid interfaces. In particular, recent studies have shown that fluid inertia can significantly affect reactive transport in porous and fractured media by inducing unique flow structures such as recirculating flows. However, the effects of pore‐scale flow and fluid inertia on mineral dissolution remain largely unknown. To address this knowledge gap, we combined visual laboratory experiments and micro‐continuum pore‐scale reactive transport modeling to investigate the effects of pore‐scale flow and fluid inertia on mineral dissolution dynamics. Through flow topology analysis, we identified unique patterns of 2D and 3D recirculating flows and their distinctive effects on dissolution. The simulation results revealed that 3D flow topology and fluid inertia dramatically alter the spatiotemporal dynamics of mineral dissolution. Furthermore, we found that the 3D flow topology fundamentally changes the upscaled relationship between porosity and reactive surface area compared to a conventional relationship, which is commonly used in continuum‐scale modeling. These findings highlight the critical role of 3D flow and fluid inertia in modeling mineral dissolution across scales, from the pore scale to the Darcy scale.more » « less
-
Abstract Clinopyroxene is a rock-forming mineral that commonly hosts melt inclusions in mafic to intermediate composition volcanic and plutonic rocks. It is highly resistant to alteration compared to other co-existing phenocrysts such as plagioclase. Several recent studies have 40Ar/39Ar dated clinopyroxene in Neoproterozoic to Miocene basalts and dolerites. To assess the viability of the technique at the youngest end of the geologic time scale, we performed 40Ar/39Ar incremental heating experiments on clinopyroxene-hosted melt inclusions from a variety of mafic lithologies and tectonic settings. Most samples produced precise plateau ages including several Quaternary basalts to andesites as young as 0.6 Ma. All data are indistinguishable from new and/or published 40Ar/39Ar ages on groundmass or plagioclase from the same samples. The source of potassium (K) and resulting 40Ar* within clinopyroxene has been debated, but thus far has only been inferred based on 40Ar/39Ar data. Using electron probe microanalysis (EPMA) we show that there is negligible K in the clinopyroxene host, but substantial K (e.g., 1–4 wt%) in trapped melt inclusions and minor amounts in plagioclase inclusions. Thus, melt inclusions, which are common in phenocrysts in basaltic magmas, can be used to obtain accurate and precise 40Ar/39Ar ages for difficult-to-date volcanic and plutonic rocks from the Precambrian to the Pleistocene.more » « less
-
Abstract Eclogite thermobarometry is crucial for constraining the depths and temperatures to which oceanic and continental crust subduct. However, obtaining the pressure and temperature (P–T) conditions of eclogites is complex as they commonly display high‐variance mineral assemblages, and the mineral compositions only vary slightly withP–T. In this contribution, we present a comparison between two independent and commonly used thermobarometric approaches for eclogites: conventional thermobarometry and forward phase‐equilibrium modelling. We assess how consistent the thermobarometric calculations are using the garnet–clinopyroxene–phengite barometer and garnet–clinopyroxene thermometer with predictions from forward modelling (i.e. comparing the relative differences between approaches). Our results show that the overall mismatch in methods is typically ±0.2–0.3 GPa and ±29–42°C although differences as large as 80°C and 0.7 GPa are possible for a few narrow ranges ofP–Tconditions in the forward models. Such mismatch is interpreted as the relative differences among methods, and not as absolute uncertainties or accuracies for either method. For most of the investigatedP–Tconditions, the relatively minor differences between methods means that the choice in thermobarometric method itself is less important for geological interpretation than careful sample characterization and petrographic interpretation for derivingP–Tfrom eclogites. Although thermobarometry is known to be sensitive to the assumedXFe3+of a rock (or mineral), therelativedifferences between methods are not particularly sensitive to the choice of bulk‐rockXFe3+, except at high temperatures (>650°C, amphibole absent) and for very large differences in assumedXFe3+(0–0.5). We find that the most important difference between approaches is the activity–composition (a–x) relations, as opposed to the end‐member thermodynamic data or other aspects of experimental calibration. When equivalenta–xrelations are used in the conventional barometer,Pcalculations are nearly identical to phase‐equilibrium models (ΔP < 0.1). To further assess the implications of these results for real rocks, we also evaluate common mathematical optimizations of reaction constants used for obtaining the maximumP–Twith conventional thermobarometric approaches (e.g. using the highestaGrs2 × aPrp in garnet and Si content in phengite, and the lowestaDi in clinopyroxene). These approaches should be used with caution, because they may not represent the compositions of equilibrium mineral assemblages at eclogite facies conditions and therefore systematically biasP–Tcalculations. Assuming method accuracy, geological meaningfulPmaxat a typical eclogite facies temperature of ~660°C will be obtained by using the greatestaDi,aCel, andaPrp and lowestaGrs andaMs; garnet and clinopyroxene with the lowest Fe2+/Mg ratios may yield geological meaningfulTmaxat a typical eclogite facies pressure of 2.5 GPa.more » « less
-
Hydrogen is a rapidly diffusing monovalent cation in nominally anhydrous minerals (NAMs, such as olivine, orthopyroxene, and clinopyroxene), which is potentially re-equilibrated during silicate melt-rock and aqueous fluid-rock interactions in massif and abyssal peridotites. We apply a 3D numerical diffusion modeling technique to provide first-order timescales of complete hydrogen re-equilibration in olivine, clinopyroxene, and orthopyroxene over the temperature range 600-1200°C. Model crystals are 1-3 mm along the c-axis and utilize H+ diffusion coefficients appropriate for Fe-bearing systems. Two sets of models were run with different boundary compositions: 1) “low-H models” are constrained by mineral-melt equilibrium partitioning with a basaltic melt that has 0.75 wt% H2O and 2) “high-H models,” which utilize the upper end of the estimated range of mantle water solubility for each phase. Both sets of models yield re-equilibration timescales that are identical and are fast for all phases at a given temperature. These timescales have strong log-linear trends as a function of temperature (R2 from 0.97 to 0.99) that can be used to calculate expected re-equilibration time at a given temperature and grain size. At the high end of the model temperatures (1000-1200°C), H+ completely re-equilibrates in olivine, orthopyroxene, and clinopyroxene within minutes to hours, consistent with previous studies. These short timescales indicate that xenolith NAM mantle water contents are likely to be overprinted prior to eruption. The models also resolve the decoupled water-trace element relationship in Southwest Indian Ridge peridotites, in which peridotite REE abundances are reproduced by partial melting models whereas the relatively high NAM H2O contents require later re-equilibration with melt. At temperatures of 600-800°C, which correspond to conditions of hydrothermal alteration of pyroxene to amphibole and talc, H+ re-equilibration typically occurs over a range of timescales spanning days to years. These durations are well within existing estimates for the duration of fluid flow in oceanic hydrothermal systems, suggesting that peridotite NAM water contents are susceptible to diffusive overprinting during higher temperature hydrothermal alteration. Thus, diffusion during aqueous fluid-rock interactions may also explain NAM H2O contents that are too high to reflect residues of melting. These relatively short timescales at low temperatures suggest that the origin of water contents measured in peridotite NAMs requires additional constraints on sample petrogenesis, including petrographic and trace element analyses. Our 3D model results also hint that H+ may diffuse appreciably during peridotite serpentinization, but diffusion coefficients at low temperature are unconstrained and additional experimental investigations are needed.more » « less
