An official website of the United States government
Abstract Although lubricants play an essential role in reducing wear and friction in mechanical systems, environmental issues persist. In the past decades, Ionic Liquids (ILs) have arisen as environmentally friendly alternatives to conventional lubricants and additives. ILs are low-volatile and non-flammable salts that possess low melting points (below 100 °C). Their tunable properties, achieved by selecting the appropriate cation and anion, make them ideal candidates for different applications, including lubricants. In recent times, Protic Ionic Liquids (PILs) have attracted attention in the tribological community as a cost-effective alternative to conventional aprotic counterparts. In this work, a choline-amino acid ionic liquid, derived only from renewable, biodegradable, and biocompatible products, was synthesized, and investigated as both neat lubricant and additive to non-polar oil. The lubricating properties of [CHO][GLY] were studied both as a neat lubricant and as a 1 wt. % additive to a polyalphaolefin (PAO) oil using a ball-on-flat reciprocating friction tester. AISI 52100 steel disks were tested against AISI 52100 steel balls using either [CHO][GLY] or the mixture of PAO+[CHO][GLY]. For comparison purposes, the commercially available base oil, PAO, was also tested. Preliminary results showed no major differences in friction between the lubricants used. Nevertheless, the addition of 1 wt.% to the PAO demonstrated a remarkable 30% reduction in wear on the steel disk. This encouraging improvement in anti-wear characteristics raises the potential advancement of lubrication technology with the choline-amino acid ionic liquid, coupled with its environmentally friendly nature. Energy-dispersive X-ray (EDX) spectroscopy, non-contact profilometry, and scanning electron microscopy (SEM) were used to study the worn steel surfaces and elucidate the wear mechanisms.
more »
« less
This content will become publicly available on September 1, 2026
Physicochemical and lubricating properties of choline amino acid ionic liquids as neat lubricants for steel-steel contact
The development of high-performance and environmentally-compatible lubricants is crucial for minimizing energy losses in mechanical systems and increasing the lifetime of moving mechanical components, thus preserving our environment. While ionic liquids (ILs) have emerged as promising next-generation materials for lubrication purposes owing to their attractive physico-chemical properties, several challenges currently limit their use in engineering applications, including their high cost and corrosivity. Recently, eco-friendly, protic ILs (PILs) have been synthesized and showed great advantages compared to tradition (aprotic) ILs, such as low cost, ease of preparation, and good lubricating properties. Despite these advancements, remarkably little is known about the interrelationship between PIL molecular structure and lubrication mechanisms. In this work, the physico-chemical and lubricating properties of a family of PILs synthesized by using only renewable, biodegradable, and biocompatible products and constituted by the same choline cation and amino-acid anions with different side chains, were investigated. The molecular structures of the choline amino acid-based ionic liquids (AAILs) were confirmed through magnetic resonance and Fourier transform infrared spectroscopy, while their thermal behavior was evaluated by differential scanning calorimetry and thermogravimetric analysis. The antiwear and friction-reducing performance of the choline AAILs when used as neat lubricants was studied as a function of normal load by reciprocating ball-on-flat tribometry using steel-steel contact. Surface analytical measurements (Raman and XPS) performed on the worn steel surfaces confirmed that the excellent lubricating performance of choline AAILs originates from the formation of oxygen- and carbon-rich tribolayers. The formation of these protective layers are influenced by the applied normal load and the molecular structure of the amino acid. The results of this work open the path for the rational design of environmentally-friendly PILs for tribological applications.
more »
« less
- PAR ID:
- 10613553
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Wear
- Volume:
- 578-579
- Issue:
- C
- ISSN:
- 0043-1648
- Page Range / eLocation ID:
- 206198
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Energetic ionic liquids (EILs) have various industrial applications because they release chemically stored energy under certain conditions. They can avoid some environmental problems caused by traditionally used toxic fuels. EILs, which are environmentally friendly and safer, are emerging as an alternative source for hypergolic bipropellant fuels. This review focuses on the crucial thermophysical properties of the EILs. The properties of imidazolium and triazolium-based ionic liquids (ILs) are discussed here. The thermophysical properties addressed, such as glass transition temperature, viscosity, and thermal stability, are critical for designing EILs to meet the need for sustainable energy solutions. Imidazolium-based ILs have tunable physical properties making them ideal for use in energy storage while triazolium-based ILs have thermal stability and energetic potential. As a result, it is important to understand and compile thermophysical properties so they can help researchers synthesize tailored compounds with desirable characteristics, advancing their application in energy storage and propulsion technologies.more » « less
-
Abstract Ionic liquids (ILs) have attracted intensive research interest due to their outstanding physiochemical properties. However, comprehensive design is necessary for targeted applications and has rarely been conducted. As a result, the industry‐scale application of ILs is still very limited. In this academia–industry collaborative research among the University of Pittsburgh, Virginia Tech. University, and Seagate Technology LLC, we report the design, synthesis, molecular dynamics (MD) simulation, and characterization of a nanometer‐thick IL, which contains abundant fluorinated segments and a hydroxyl endgroup, as the next‐generation nano‐lubricant for hard disk drives (HDDs). The lab‐ and industry‐level testing results indicate that the IL lubricant performs significantly better than the state‐of‐the‐art lubricant, that is, perfluoropolyether (PFPE) that has been utilized for three decades in the HDD industry in two key functions: thermal stability and fly clearance. Meanwhile, the IL lubricant also shows excellent lubricity and durability. The outstanding performance of the IL has been attributed to its unique molecular structure on the solid substrate, which is supported by MD simulation results. Our work establishes the IL as a promising candidate among the next‐generation media lubricants in HDD industry. Meanwhile, the finding obtained here has important implications in many other applications involving nano‐lubricants.more » « less
-
While ionic liquids (ILs) have attracted much attention as potential next-generation lubricant additives, their implementation in oil formulations has been hindered by their limited solubility in hydrocarbon fluids and corrosivity. Here, we encapsulate an oil-insoluble IL that has been studied in lubrication science, namely 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([HMIM][TFSI]), within poly(ethylene glycol dimethacrylate-buytl methacrylate copolymer) (poly(EGDM-c-BMA)) microshells using a mini-emulsion polymerization process. The synthesized poly(EGDM-c-BMA)-encapsulated [HMIM][TFSI] microparticles are shown to be dispersible in a non-polar, synthetic oil (i.e., poly-α-olefin). Tribological experiments indicated that the microcapsules act as an additive reservoir that reduces friction by releasing the encapsulated IL at the sliding interface following the mechanical rupture of the polymer shell. X-ray photoelectron spectroscopy (XPS) measurements provided evidence that [HMIM][TFSI] does not tribochemically react on steel surfaces to create a reaction layer, thus suggesting that this IL reduces friction by generating a solid-like, layered structure upon nanoconfinement at sliding asperities, as proposed by previous nanoscale studies. The results of this work do not only provide new insights into the lubrication mechanism of ILs when used as additives in base oils in general, but also establish a new, broadly-applicable framework based on polymer encapsulation for utilizing ILs or other compounds with limited solubility as additives for oil formulations.more » « less
-
The friction and wear behavior of palladium (Pd)-rich amorphous alloy (Pd43Cu27Ni10P20) against 440C stainless steel under ionic liquids as lubricants, i.e., 1-nonyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]amide ([C9C1im][NTf2]), were investigated using a ball-on-disc reciprocating tribometer at ambient, 100 and 200 °C with different sliding speeds of 3 and 7 mm/s, whose results were compared to those from crystalline Pd samples. The measured coefficient of friction (COF) and wear were affected by both temperature and sliding speed. The COF of crystalline Pd samples dramatically increased when the temperature increased, whereas the COF of the amorphous Pd alloy samples remained low. As the sliding speed increased, the COF of both Pd samples showed decreasing trends. From the analysis of a 3D surface profilometer and scanning electron microscopy (SEM) with electron dispersive spectroscopy (EDS) data, three types of wear (i.e., delamination, adhesive, and abrasive wear) were observed on the crystalline Pd surfaces, whereas the amorphous Pd alloy surfaces produced abrasive wear only. In addition, X-ray photoelectron spectroscopy (XPS) measurements were performed to study the formation of tribofilm. It was found that the chemical reactivity at the contacting interface increased with temperature and sliding contact speed. The ionic liquids (ILs) were effective as lubricants when the applied temperature and sliding speed were 200 °C and 7 mm/s, respectively.more » « less
