An official website of the United States government
Abstract DNA tiles serve as the fundamental building blocks for DNA self-assembled nanostructures such as DNA arrays, origami, and designer crystals. Introducing additional binding arms to DNA crossover tiles holds the promise of unlocking diverse nano-assemblies and potential applications. Here, we present one-, two-, and three-layer T-shaped crossover tiles, by integrating T junction with antiparallel crossover tiles. These tiles carry over the orthogonal binding directions from T junction and retain the rigidity from antiparallel crossover tiles, enabling the assembly of various 2D tessellations. To demonstrate the versatility of the design rules, we create 2-state reconfigurable nanorings from both single-stranded tiles and single-unit assemblies. Moreover, four sets of 4-state reconfiguration systems are constructed, showing effective transformations between ladders and/or rings with pore sizes spanning ~20 nm to ~168 nm. These DNA tiles enrich the design tools in nucleic acid nanotechnology, offering exciting opportunities for the creation of artificial dynamic DNA nanopores.
more »
« less
Direction-dependent bending resistance of 3D printed bio-inspired composites with asymmetric 3D articulated tiles
Abstract Inspired by the protective armors in nature, composites with asymmetric 3D articulated tiles attached to a soft layer are designed and fabricated via a multi-material 3D printer. The bending resistance of the new designs are characterized via three-point bending experiments. Bending rigidity, strength, and final deflection of the designs are quantified and compared when loaded in two different in-plane and two different out-of-plane directions. It is found that in general, the designs with articulated tiles show direction-dependent bending behaviors with significantly increased bending rigidity, strength, and deflection to final failure in certain loading directions, as is attributed to the asymmetric tile articulation (asymmetric about the mid-plane of tiles) and an interesting sliding-induced auxetic effect. Analytical, numerical, and experimental analyses are conducted to unveil the underlying mechanisms.
more »
« less
- Award ID(s):
- 2140223
- PAR ID:
- 10613591
- Publisher / Repository:
- IOP Publishing
- Date Published:
- Journal Name:
- Bioinspiration & Biomimetics
- Volume:
- 19
- Issue:
- 5
- ISSN:
- 1748-3182
- Page Range / eLocation ID:
- 056006
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We report on the design and the modeling of a three-dimensional (3D) printed flexure-based actuation mechanism for robotic microtweezers, the main body of which is a single piece of nylon. Our design aims to fill a void in sample manipulation between two classes of widely used instruments: nano-scale and macro-scale robotic manipulators. The key component is a uniquely designed cam flexure system, which linearly translates the bending of a piezoelectric bimorph actuator into angular displacement. The 3D printing made it possible to realize the fabrication of the cam with a specifically calculated curve, which would otherwise be costly using conventional milling techniques. We first characterized 3D printed nylon by studying sets of simple cantilevers, which provided fundamental characteristics that could be used for further designs. The finite element method analysis based on the obtained material data matched well with the experimental data. The tweezers showed angular displacement from 0° to 10° linearly to the deflection of the piezo actuator (0–1.74 mm) with the linearity error of 0.1°. Resonant frequency of the system with/without working tweezer tips was discovered as 101 Hz and 127 Hz, respectively. Our design provides simple and low-cost construction of a versatile manipulator system for samples in the micro/meso-scale (0.1–1 mm).more » « less
-
Abstract Stretchable conductive materials have attracted great attention due to their potential applications as strain sensors, wearable electronics, soft robotics, and medical devices. The fabrication of these materials with customized object geometries is desirable, but the methods to achieve them are still highly limited. Additive manufacturing via vat photopolymerization can generate sophisticated object geometries, but there is still a significant need to print with materials that afford improved conductivity, mechanical properties, elastic recovery, and durability. Herein, stretchable strain sensors with a range of 3D printed designs are reported using vat photopolymerization. Ionic liquid resins are optimized for their printability using Sudan‐I as a photoabsorber and used to fabricate 3D objects that are subjected to compression, stretching, and bending loads that are detected as real‐time changes in current. Additionally, the self‐adhesive nature of these materials enables mechanically damaged structures to be mended together to regain its function as a strain sensor. These ionic liquid resins are compatible with commercial 3D printers, which enhances their applicability for on‐demand production of customized devices.more » « less
-
Abstract Metal foam sandwich panels have been the subject of many concept studies, due to their exceptional stiffness, light weight, and crash absorption capacity. Yet, the industrial production of the material has been hampered by the fact that it is challenging to bend the material into practical engineering shapes. Only recently, it has been shown that bending of metal foam sandwich panels is possible using lasers. It was also shown that the material can be bent into Euclidean (2D) geometries, and the governing laser-induced bending mechanisms were analyzed. This study was focused on laser forming of metal foam sandwich panels into non-Euclidean (3D) geometries. It was investigated whether the bending mechanisms and process parameters identified for 2D laser forming translate to 3D deformation. Additionally, the impact of the laser scan length was determined by comparing different scan patterns that achieve the same 3D geometries. It was shown that laser forming could induce 3D deformation necessary for both bowl and saddle shapes, the two fundamental non-Euclidean geometries. The amount of laser-induced bending and in-plane strains vary depending on process conditions and the governing bending mechanisms. Lastly, the laser scan length was shown to become more important for metal foam sandwich panels, where the panel thickness tends to be large.more » « less
-
Abstract Boron nitride nanotubes (BNNTs) are the perfect candidate for nanofillers in high-temperature multifunctional ceramics due to their high thermal stability, oxidation resistance, good mechanical properties, high thermal conductivity, and radiation shielding. In this paper, 3D printed ceramic nanocomposite with 0.1 wt% of BNNT was prepared by fusing it at high temperatures. Samples were built with three different print directions to study the effect of print layers on mechanical performance along with BNNT addition. Dynamic mechanical analysis is performed to study the length effect of nanoscale reinforcements on the mechanical properties of the printed ceramic composites reporting significant improvements up to 55% in bending strength and 72% in bending modulus with just 0.1 wt% BNNT addition. A 63% thermal diffusivity improvement of ceramic by adding BNNTs is observed using laser flash analysis. The bridging and pull-out effect of nanotubes with a longer aspect ratio was observed with high-resolution microscopy. Such composites’ modeling and simulation approaches are crucial for virtual testing and industrial applications. Understanding the effect of nanoscale synthetic fillers for 3D printed high-temperature ceramics can revolutionize future extreme environment structures.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1088/1748-3190/ad5ee7
