An official website of the United States government
The development of portable electronic chemical sensors is key to solving a number of challenges, including monitoring environmental and industrial hazards, as well as understanding and improving human health. Framework materials possess several desirable characteristics that make them well-suited for electroanalytical applications, including high surface area, atomically precise distribution of active sites, and tunable properties that can be leveraged through modular reticular chemistry. This review highlights the emergence of conductive framework materials as active components in electrically transduced chemical sensors, including the development of new materials for the detection of a wide variety of analytes in both gas and liquid phase. The efforts to gain fundamental understanding of the molecular interactions and sensing mechanisms between framework materials and analytes are described, along with applications of these materials on portable and flexible substrates. The review suggests areas for further study, including the study of material−analyte interactions at the molecular level and the continued development of scalable methods for the integration of framework materials into low-power, portable sensing devices.
more »
« less
Conductive Framework Materials for Chemiresistive Detection and Differentiation of Toxic Gases
Sensing complex gaseous mixtures and identifying their composition and concentration have the potential to achieve unprecedented improvements in environmental monitoring, medical diagnostics, industrial safety, and the food/agriculture industry. Electronically transduced chemical sensors capable of recognizing and differentiating specific target gases and transducing these chemical stimuli in a portable electronic device offer an opportunity for impact by bridging the utility of chemical information with global wireless connectivity. Among electronically transduced chemical sensors, chemiresistors stand out as particularly promising due to combined features of low-power requirements, room temperature operation, non-line-of-sight detection, high portability, and exceptional modularity. Relying on changes in resistance of a functional material triggered by variations in the surrounding chemical environment, these devices have achieved part-per-billion sensitivities of analytes by employing conductive polymers, graphene, carbon nanotubes (CNTs), metal oxides, metal nanoparticles, metal dichalcogenides, or MXenes as sensing materials. Despite these tremendous developments, the need for stable, selective, and sensitive chemiresistors demands continued innovation in material design in order to operate in complex mixtures with interferents as well as variations in humidity and temperature. To fill existing gaps in sensing capabilities, conductive metal−organic frameworks (MOFs) and covalent organic frameworks (COFs) have recently emerged as a promising class of materials for chemiresistive sensing. In contrast to previously reported chemiresistors, these materials offer at least three unique features for gas sensing applications: (i) bottom-up synthesis from molecularly precise precursors that allows for strategic control of material−analyte interactions, (ii) intrinsic conductivity that simultaneously facilitates charge transport and signal transduction under low power requirements, and (iii) high surface area that enables the accessibility of abundant active sites and decontamination of gas streams by coordinating to and, sometimes, detoxifying harmful analytes. Through an emphasis on molecular engineering of structure−property relationships in conductive MOFs and COFs, combined with strategic innovations in device integration strategies and device form factor (i.e., the physical dimensions and design of device components), our group has paved the way to demonstrating the multifunctional utility of these materials in the chemiresistive detection of gases and vapors. Backed by spectroscopic assessment of material−analyte interactions, we illustrated how molecular-level features lead to device performance in detection, filtration, and detoxification of gaseous analytes. By merging the bottom-up synthesis of these materials with device integration, we show the versatility and scalability of using these materials in low-power electronic sensing devices. Taken together, our achievements, combined with the progress spearheaded on this class of materials by other researchers, establish conductive MOFs and COFs as promising multifunctional materials for applications in electronically transduced, portable, low-power sensing devices.
more »
« less
- Award ID(s):
- 1945218
- PAR ID:
- 10614537
- Publisher / Repository:
- Accounts of Chemical Research
- Date Published:
- Journal Name:
- Accounts of Chemical Research
- Volume:
- 57
- Issue:
- 19
- ISSN:
- 0001-4842
- Page Range / eLocation ID:
- 2775 to 2789
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Electrochemical applications of metal organic frameworks (MOFs) are of considerable current interest. Due to the large surface area exposed to solution, MOFs are potentially useful electrode materials for sensing inner‐sphere analytes, such as reactive oxygen species. Herein, we electrodeposited copper benzene tricarboxylate MOF (HKUST‐1) into the cavity of an open carbon nanopipette (CNP) to produce a CNP‐MOF nanoelectrode. Unlike electronically conductive metal or carbon electrodes, the electrochemical response of CNP–MOFs relies on oxidation/reduction of Cu(I)/Cu(II) nodes in the porous nanostructure. Nevertheless, sigmoidal steady‐state voltammograms with a well‐defined plateau current have been recorded for simple redox mediators, for example, ferrocenemethanol. A linear calibration curve obtained for the hydrogen peroxide reduction suggests that CNP–MOFs can potentially be useful as nanosensors for peroxide.more » « less
-
Surface‐Mediated Interconnections of Nanoparticles in Cellulosic Fibrous Materials toward 3D SensorsAbstract Fibrous materials serve as an intriguing class of 3D materials to meet the growing demands for flexible, foldable, biocompatible, biodegradable, disposable, inexpensive, and wearable sensors and the rising desires for higher sensitivity, greater miniaturization, lower cost, and better wearability. The use of such materials for the creation of a fibrous sensor substrate that interfaces with a sensing film in 3D with the transducing electronics is however difficult by conventional photolithographic methods. Here, a highly effective pathway featuring surface‐mediated interconnection (SMI) of metal nanoclusters (NCs) and nanoparticles (NPs) in fibrous materials at ambient conditions is demonstrated for fabricating fibrous sensor substrates or platforms. Bimodally distributed gold–copper alloy NCs and NPs are used as a model system to demonstrate the semiconductive‐to‐metallic conductivity transition, quantized capacitive charging, and anisotropic conductivity characteristics. Upon coupling SMI of NCs/NPs as electrically conductive microelectrodes and surface‐mediated assembly (SMA) of the NCs/NPs as chemically sensitive interfaces, the resulting fibrous chemiresistors function as sensitive and selective sensors for gaseous and vaporous analytes. This new SMI–SMA strategy has significant implications for manufacturing high‐performance fibrous platforms to meet the growing demands of the advanced multifunctional sensors and biosensors.more » « less
-
Sensitive and selective detection of chemical and biological analytes is critical in various scientific and technological fields. As an emerging class of multifunctional materials, covalent organic frameworks (COFs) with their unique properties of chemical modularity, large surface area, high stability, low density, and tunable pore sizes and functionalities, which together define their programmable properties, show promise in advancing chemical detection. This review demonstrates the recent progress in chemical detection where COFs constitute an integral component of the achieved function. This review highlights how the unique properties of COFs can be harnessed to develop different types of chemical detection systems based on the principles of chromism, luminescence, electrical transduction, chromatography, spectrometry, and others to achieve highly sensitive and selective detection of various analytes, ranging from gases, volatiles, ions, to biomolecules. The key parameters of detection performance for target analytes are summarized, compared, and analyzed from the perspective of the detection mechanism and structure–property–performance correlations of COFs. Conclusions summarize the current accomplishments and analyze the challenges and limitations that exist for chemical detection under different mechanisms. Perspectives on how future directions of research can advance the COF-based chemical detection through innovation in novel COF design and synthesis, progress in device fabrication, and exploration of novel modes of detection are also discussed.more » « less
-
We summarize our recent results on material, device, and circuit structures for detection of volatile analytes in the atmosphere and proteins in aqueous solution. Common to both types of sensing goals is the design of materials that respond more strongly to analytes of interest than to likely interferents, and the use of chemical and electronic amplification methods to increase the ratio of the desired responses to the drift (signal/noise ratio). Printable materials, especially polymers, are emphasized. Furthermore, the use of multiple sensing elements, typically field-effect transistors, increases the selectivity of the information, either by narrowing the classes of compounds providing the responses, distinguishing time-dependent from dose-dependent responses, and increasing the ratio of analyte responses to environmental drifts. To increase the stability of systems used to detect analytes in solution, we sometimes separate the sensing surface from the output device in an arrangement known as a remote gate. We show that the output device may be an organic-based or a silicon-based transistor, and can respond to electrochemical potential changes at the sensing surface arising from a variety of chemical interactions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.accounts.4c00319
