skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on June 29, 2026

Title: LCD 3D PRINTING OF A NORMALLY CLOSED FLUIDIC TRANSISTOR VIA ADDITIVE ASSEMBLY
Fluidically actuated soft robotic devices have attracted increasing interest due to their ability to provide benefits over traditional rigid systems in biomedical applications such as minimally invasive surgery, rehabilitative devices, and prosthetics. Unfortunately, challenges remain for controlling the fluidic operations of such systems, driving a critical need for new classes of fluidic circuit elements. Here we explore the use of “Liquid Crystal Display (LCD)” 3D printing—a low-cost vat photopolymerization (VPP) approach—to additively manufacture “normally closed” fluidic transistors with operations analogous to their electronic counterparts. Specifically, we leverage an “additive assembly” strategy wherein part components are printed separately and assembled post hoc. Experimental results for higher source pressure magnitudes revealed that in the absence of an applied gate pressure, the element obstructed source-to-drain fluid flow—i.e., normally closed behavior—however, by applying a gate pressure of ≥25 kPa, the element permitted source-to-drain fluid flow. Thus, this work establishes the efficacy for VPP-based additive assembly of fluidic circuit elements, which could help to advance and democratize fluidic circuit-based soft robotic technologies.  more » « less
Award ID(s):
1943356
PAR ID:
10620991
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Transducers Research Foundation
Date Published:
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, Science Advances)
    null (Ed.)
    The emergence of soft robots has presented new challenges associated with controlling the underlying fluidics of such systems. Here, we introduce a strategy for additively manufacturing unified soft robots comprising fully integrated fluidic circuitry in a single print run via PolyJet three-dimensional (3D) printing. We explore the efficacy of this approach for soft robots designed to leverage novel 3D fluidic circuit elements—e.g., fluidic diodes, “normally closed” transistors, and “normally open” transistors with geometrically tunable pressure-gain functionalities—to operate in response to fluidic analogs of conventional electronic signals, including constant-flow [“direct current (DC)”], “alternating current (AC)”–inspired, and preprogrammed aperiodic (“variable current”) input conditions. By enabling fully integrated soft robotic entities (composed of soft actuators, fluidic circuitry, and body features) to be rapidly disseminated, modified on demand, and 3D-printed in a single run, the presented design and additive manufacturing strategy offers unique promise to catalyze new classes of soft robots. 
    more » « less
  2. ; ; ; ; (, Advanced Intelligent Systems)
    Fluidic control systems target unique applications where conventional electronics fail. However, current fluidic control systems face challenges in accessible fabrication, reproducibility, and modifiable characteristics such as operating pressure and instability count. Herein, fused deposition‐modeled compliant mechanisms with flexing beams and soft linear actuators for fluid switching and the control of soft robotic systems are introduced. A linear actuator switches a compliant mechanism to cut off airflow through off‐the‐shelf tubing. The modular compliant logic devices can be configured as normally open or normally closed switches, as NOT, AND, and OR gates, and as nonvolatile memory elements. Their use is demonstrated in controlling a fluidic stepper motor, a worm‐like robot, and a fluidic display. These fluidic switches are printable using inexpensive desktop 3D printers, can be reliably reproduced in large quantities, and offer a wide range of modifiable parameters, including scalability, adaptability in operating pressure, and the tunability of instability counts for computational and memory functions. 
    more » « less
  3. ; ; ; ; ; (, Advanced Intelligent Systems)
    The recent development of soft fluidic analogs to electrical components aims to reduce the demand for rigid and bulky electromechanical valves and hard electronic controllers within soft robots. This ongoing effort is advanced in this work by creating sheet‐based fluidic diodes constructed from readily available flexible sheets of polymers and textiles using a layered fabrication approach amenable to manufacturing at scale. These sheet‐based fluidic diodes restrict reverse flow over a wide range of differential pressures—exhibiting a diodicity (the ratio of resistance to reverse vs forward flow) of approximately 100×—to address functional limitations exhibited by prior soft fluidic diodes. By harnessing the diode's highly unidirectional flow, soft devices capable of 1) facilitating the capture and storage of pressurized fluid, 2) performing Boolean operations using diode logic, 3) enabling binary encoding of circuits by preventing interactions between different pressurized input lines, and 4) converting oscillating input pressures to a direct current‐like, positively phased output are realized. This work exemplifies the use of fluidic diodes to achieve complex patterns of actuation and unique capabilities through embedded fluidic circuitry, enabling future development of sheet‐based systems—including wearable and assistive robots made from textiles—as well as other soft robotic devices. 
    more » « less
  4. ; ; ; (, Lab on a Chip)
    In situ direct laser writing ( is DLW) strategies that facilitate the printing of three-dimensional (3D) nanostructured components directly inside of, and fully sealed to, enclosed microchannels are uniquely suited for manufacturing geometrically complex microfluidic technologies. Recent efforts have demonstrated the benefits of using micromolding and bonding protocols for is DLW; however, the reliance on polydimethylsiloxane (PDMS) leads to limited fluidic sealing ( e.g. , operational pressures <50–75 kPa) and poor compatibility with standard organic solvent-based developers. To bypass these issues, here we explore the use of cyclic olefin polymer (COP) as an enabling microchannel material for is DLW by investigating three fundamental classes of microfluidic systems corresponding to increasing degrees of sophistication: (i) “2.5D” functionally static fluidic barriers (10–100 μm in height), which supported uncompromised structure-to-channel sealing under applied input pressures of up to 500 kPa; (ii) 3D static interwoven microvessel-inspired structures (inner diameters < 10 μm) that exhibited effective isolation of distinct fluorescently labelled microfluidic flow streams; and (iii) 3D dynamically actuated microfluidic transistors, which comprised bellowed sealing elements (wall thickness = 500 nm) that could be actively deformed via an applied gate pressure to fully obstruct source-to-drain fluid flow. In combination, these results suggest that COP-based is DLW offers a promising pathway to wide-ranging fluidic applications that demand significant architectural versatility at submicron scales with invariable sealing integrity, such as for biomimetic organ-on-a-chip systems and integrated microfluidic circuits. 
    more » « less
  5. ; ; ; ; (, Proceedings of the National Academy of Sciences)
    null (Ed.)
    Regulation systems for fluid-driven soft robots predominantly consist of inflexible and bulky components. These rigid structures considerably limit the adaptability and mobility of these robots. Soft valves in various forms for fluidic actuators have been developed, primarily fluidically or electrically driven. However, fluidic soft valves require external pressure sources that limit robot locomotion. State-of-the-art electrostatic valves are unable to modulate pressure beyond 3.5 kPa with a sufficient flow rate (>6 mL⋅min −1 ). In this work, we present an electrically powered soft valve for hydraulic actuators with mesoscale channels based on a different class of ultrahigh-power density dynamic dielectric elastomer actuators. The dynamic dielectric elastomer actuators (DEAs) are actuated at 500 Hz or above. These DEAs generate 300% higher blocked force compared with the dynamic DEAs in previous works and their loaded power density reaches 290 W⋅kg −1 at operating conditions. The soft valves are developed with compact (7 mm tall) and lightweight (0.35 g) dynamic DEAs, and they allow effective control of up to 51 kPa of pressure and a 40 mL⋅min −1 flow rate with a response time less than 0.1 s. The valves can also tune flow rates based on their driving voltages. Using the DEA soft valves, we demonstrate control of hydraulic actuators of different volumes and achieve independent control of multiple actuators powered by a single pressure source. This compact and lightweight DEA valve is capable of unprecedented electrical control of hydraulic actuators, showing the potential for future onboard motion control of soft fluid-driven robots. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email