An official website of the United States government
Online repository: https://speautomotive.com/acce-conference/2021-acce-papers-and-program-guides/ and also on: arXiv:2204.00909. Abstract: While welding of thermoplastic composites (TPCs) is a promising rivetless method to reduce weight, higher confidence in joints’ structural integrity and failure prediction must be achieved for widespread use in industry. In this work, we present an innovative study on damage detection for ultrasonically welded TPC joints with multi-walled carbon nanotubes (MWCNTs) and embedded buckypaper films. MWCNTs show promise for structural health monitoring (SHM) of composite joints, assembled by adhesive bonding or fusion bonding, through electrical resistance changes. This study focuses on investigating multifunctional films and their suitability for ultrasonic welding (USW) of TPCs, using two approaches: 1) MWCNT-filled polypropylene (PP) nanocomposites prepared via solvent dispersion, and 2) high conductivity MWCNT buckypaper embedded between PP films by hot pressing. Nanocomposite formulations containing 5 wt% and 10 wt% MWCNTs were synthesized using solvent dispersion method, followed by compression molding to manufacture films. The effect of MWCNT concentration on electrical and dynamic mechanical behavior of multifunctional films was examined with a Sourcemeter and Dynamic Mechanical Analyzer, and a comparison was made between 5 - 20 wt% MWCNT/PP films based on previous research. Glass fiber/polypropylene (GF/PP) composite joints were ultrasonically welded in a single lap shear configuration using buckypaper and MWCNT/PP films. Furthermore, electrical resistance measurements were carried out for joints under bending loads. It was observed that 15 wt% and 20 wt% MWCNT/PP films had higher stability and sensitivity for resistance response than embedded buckypaper and films with low MWCNT contents, demonstrating their suitability for USW and potential for SHM.
more »
« less
Brief Paper: Spiral Laser Keyhole Welding of Aluminum and Copper: Composition, Microstructure and Properties
Abstract Laser keyhole welding of dissimilar metals has been widely used in industrial applications. One critical challenge for this process is the formation of intermetallic compounds (IMCs) that undermine the electrical and mechanical properties of the joints. Compared with the commonly used linear contours, welding with spiral contours can provide larger areas of joining and hence higher allowable loading. This can be particularly useful for certain applications. In this research, laser welding experiments with different spiral contours were performed, and the chemical composition, microstructure, and mechanical properties of the joints were characterized. Three spiral distances were used in the experiments. As the spiral distance was changed from 0.1 mm to 0.3 mm and 0.5 mm, the average Cu concentration in the upper region of the joints was decreased, lower amounts of IMCs were found in the joints, and the joints were capable of sustaining higher mechanical loading.
more »
« less
- Award ID(s):
- 2223007
- PAR ID:
- 10621702
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- ISBN:
- 978-0-7918-8811-7
- Format(s):
- Medium: X
- Location:
- Knoxville, Tennessee, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Articular cartilage (AC) is a load-bearing tissue that covers long bones in synovial joints. The biphasic/poroelastic mechanical properties of AC help it to protect joints by distributing loads, absorbing impact forces, and reducing friction. Unfortunately, alterations in these mechanical properties adversely impact cartilage function and precede joint degeneration in the form of osteoarthritis (OA). Thus, understanding what factors regulate the poroelastic mechanical properties of cartilage is of great scientific and clinical interest. Transgenic mouse models provide a valuable platform to delineate how specific genes contribute to cartilage mechanical properties. However, the poroelastic mechanical properties of murine articular cartilage are challenging to measure due to its small size (thickness ∼ 50 microns). In the current study, our objective was to test whether the poroelastic mechanical properties of murine articular cartilage can be determined based solely on time-dependent cell death measurements under constant loading conditions. We hypothesized that in murine articular cartilage subjected to constant, sub-impact loading from an incongruent surface, cell death area and tissue strain are closely correlated. We further hypothesized that the relationship between cell death area and tissue strain can be used—in combination with inverse finite element modeling—to compute poroelastic mechanical properties. To test these hypotheses, murine cartilage-on-bone explants from different anatomical locations were subjected to constant loading conditions by an incongruent surface in a custom device. Cell death area increased over time and scaled linearly with strain, which rose in magnitude over time due to poroelastic creep. Thus, we were able to infer tissue strain from cell death area measurements. Moreover, using tissue strain values inferred from cell death area measurements, we applied an inverse finite element modeling procedure to compute poroelastic material properties and acquired data consistent with previous studies. Collectively, our findings demonstrate in the key role poroelastic creep plays in mediating cell survival in mechanically loaded cartilage and verify that cell death area can be used as a surrogate measure of tissue strain that enables determination of murine cartilage mechanical properties.more » « less
-
This work discusses several aspects of the weldability of AA5083-H116 butt-welded joints, using ER5183 filler material, automated GMAW-P process, and 80Ar19He1O2 shielding gas. The used methodology included the characterization of base metal, the development of welded joints using two different heat inputs, the microhardness profiles analysis on the cross section of the welded joint, and the microstructural evolution using microscopy. The above-mentioned measurements were complemented with residual stress evaluation using the x-ray diffraction technique, together with analysis of transversal and longitudinal tensile tests of the welded joints. The obtained results in welded joints indicated that yield strength, ultimate tensile strength, and ductility behavior have been influenced by heat input compared to base metal and reported values for similar alloys. Residual stress results showed that both the weld metal and adjacent coarse grain zone were subjected to tensile stresses, while the refined grain zone (FGZ) and base metal adjacent to the FGZ were subjected to compressive stresses. Additionally, the magnitude of residual stresses was smaller than maximum tensile stresses, and its behavior was related to both heat input and mechanical properties along welding regions.more » « less
-
Monitoring the frictional behavior of rock discontinuities is essential for the identification of potential natural hazards caused by mechanical instability. Active seismic monitoring of changes in transmitted and/or reflected compressional (P) and shear (S) waves has been used as a non-destructive method to assess the degree of damage inside rock and to monitor slip along a discontinuity. The objective of this study is to explore the geophysical response of a saturated rock joint undergoing shear. Laboratory shear tests are conducted on prismatic Indiana limestone specimens. Induced tension fractures resulted in specimens composed of two blocks (152.4 mm 127.0 mm 50.8 mm) with rough contact surfaces. Direct shear experiments were performed inside a metal confinement chamber under an effective normal stress of 2 MPa on water-saturated specimens. During the experiments, the chamber pressure, the total normal load, the shear load and the slip displacement were monitored. During the tests, continuous pulses of P- and S-waves were transmitted through the specimen and the amplitudes of the transmitted and reflected waves were recorded. The paper provides results of the mechanical and geophysical response of saturated joints and compares them with those obtained from similar, but dry, joints. For dry joints, both transmitted and reflected P- and S-waves show a distinct peak wave amplitude prior to shear failure. However, for saturated joints, a distinct peak in amplitude is only observed in both transmitted and reflected S-waves. Transmitted and reflected P-waves, propagated through saturated rock, displayed a continuous decrease and increase in amplitude, respectively, but had a sudden change in the rate of amplitude change that can be taken as a seismic precursor to joint shear failure.more » « less
-
Abstract The core of this research is separated into three domains, the ultrahigh strain rate response of elastomeric polymers, laser‐induced shock waves , and terahertz time‐domain spectroscopy (THz‐TDS). Elastomers, e.g., polyurea, constitute an advance class of materials suitable for many applications, specifically in high impact loading scenarios, thus, a laser‐induced shock wave (LSW) experimental technique is used to investigate the mechanical response of shock‐loaded polyurea. LSW can submit samples to a strain rate exceeding 106s−1at low strains, enabling determination of material intrinsic failure modes. The large deformation induced during shock loading may alter the macromolecule structure, which can only be detected spectroscopically. Therefore, this research incorporated terahertz bulk spectroscopy to detect and report molecular conformational changes. Microscopy techniques were also used to elucidate changes in the microscale properties, morphology, and topography. The interpretation of the results explicated brittle failure in terms of partial and total spallation and, remarkably, ductile failure leading to plastic deformation, including plastic bulging and adiabatic shearing, not previously associated with LSW technique. Furthermore, spectral changes found in the terahertz regime substantiated the validity of terahertz spectroscopy in elucidating the underlying mechanism associated with the impact mitigating properties of dynamically loaded polyurea.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/MSEC2024-125358
