An official website of the United States government
This paper presents a study on the characterization of density as a function of temperature for phase change materials (PCMs). More specifically, in this study we analyze organic alkane PCMs, often called paraffins. PCMs are materials that have the ability to absorb a substantial amount of heat during phase transition from solid to liquid, and therefore prove to be useful in thermal energy storage. The density of paraffin wax PCMs is largely dependent on temperature, and during the phase change process, the density decreases dramatically as the PCM transitions from solid to liquid. Consequently, the PCM experiences dramatic volumetric expansion during this transition. Besides the thermal energy storage uses of PCMs, this volumetric expansion that they exhibit is also used in thermal actuator applications, often referred to as wax motors. While density of PCMs does affect their thermal and mechanical performance, the property is not well-characterized within the literature. In this paper, we examine ten paraffin wax PCMs with varying meltingtemperatures and characterize their densities as a function of temperature. This characterization was done usinga piston and cylinder dilatometer test setup within a temperature-controlled thermal chamber that we designedand validated to the well-characterized density properties of water. The density and temperature relationships werefurther analyzed using piecewise linear regression analysis to develop mathematical models of density as it relates totemperature, which will be useful to those wishing to analyze designs in which PCMs are used, such as in PCM-filled heat sinks.
more »
« less
Bio-Based Phase Change Materials for Sustainable Development
The increasing global population has intensified the demand for energy and food, leading to significant greenhouse gas (GHG) emissions from both sectors. To mitigate these impacts and achieve Sustainable Development Goals (SDGs), passive thermal storage methods, particularly using phase change materials (PCMs), have become crucial for enhancing energy efficiency and reducing GHG emissions across various industries. This paper discusses the state of the art of bio-based phase change materials (bio-PCMs), derived from animal fats and plant oils as sustainable alternatives to traditional paraffin-based PCMs, while addressing the challenges of developing bio-PCMs with suitable phase change properties for practical applications. A comprehensive process is proposed to convert bacon fats to bio-PCMs, which offer advantages such as non-toxicity, availability, cost-effectiveness, and stability, aligning with multiple SDGs. The synthesis process involves hydrolysis to break down fat molecules obtained from the extracted lipid, followed by three additional independent processes to further tune the phase change properties of PCMs. The esterification significantly decreases the phase transition temperatures while slightly improving latent heat; the UV-crosslinking moderately raises both the phase transition temperature and latent heat; the crystallization remarkably increases the both. The future research and guidelines are discussed to develop the large scale manufacturing with cost effectiveness, to optimize synthesis process by multiscale modeling, and to improve thermal conductivity and latent heat capacities at the same time.
more »
« less
- Award ID(s):
- 1738802
- PAR ID:
- 10625626
- Publisher / Repository:
- Materials
- Date Published:
- Journal Name:
- Materials
- Volume:
- 17
- Issue:
- 19
- ISSN:
- 1996-1944
- Page Range / eLocation ID:
- 4816
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Phase-change materials (PCMs) play a pivotal role in the development of advanced thermal devices due to their reversible phase transitions, which drastically modify their thermal and optical properties. In this study, we present an effective dynamic thermal transistor with an asymmetric design that employs distinct PCMs, vanadium dioxide (VO2), and germanium antimony telluride (GST), on either side of the gate terminal, which is the center of the control unit of the near-field thermal transistor. This asymmetry introduces unique thermal modulation capabilities, taking control of thermal radiation in the near-field regime. VO2 transitions from an insulating to a metallic state, while GST undergoes a reversible switch between amorphous and crystalline phases, each inducing substantial changes in thermal transport properties. By strategically combining these materials, the transistor exhibits enhanced functionality, dynamically switching between states of absorbing and releasing heat by tuning the temperature of gate. This gate terminal not only enables active and efficient thermal management but also provides effective opportunities for manipulating heat flow in radiative thermal circuits. Our findings highlight the potential of such asymmetrically structured thermal transistors in advancing applications across microelectronics, high-speed data processing, and sustainable energy systems, where precise and responsive thermal control is critical for performance and efficiency.more » « less
-
Inorganic salt hydrates are promising phase-change materials (PCMs) for thermal energy storage due to their high latent heat of fusion. However, their practical application is often limited by their unstable form, dehydration, large supercooling, and low thermal conductivity. Porous melamine foam and its carbonized derivatives are potential supporting porous materials to encapsulate inorganic salt hydrate PCMs to address these problems. This work investigates the effect of pyrolysis temperature on the morphology and structure of the carbonized foams and their thermal energy storage performance. Pyrolysis of melamine foam at 700−900 °C leads to the formation of crystalline sodium cyanate and sodium carbonate particles on the foam skeleton surface, which allows the spontaneous impregnation of the carbon foam with molten CaCl2·6H2O.The form-stable foam-CaCl2·6H2O composite effectively suppresses supercooling and dehydration, demonstrating the efficacy of carbon foam as a promising supporting material for inorganic salt hydrate PCMs.more » « less
-
Phase change materials (PCMs) have tremendous capacity as passive components to recover and repurpose thermal energy from transient power systems. However, PCMs are only effective if the time scale of the thermal energy storage and retrieval rates match those required for a particular system. We develop a framework to assess the efficiency of pulsed thermal energy storage based on the concept of “thermal impedance,” drawing upon an analogous approach from electrical energy storage. We experimentally characterize a 1 cm thick paraffin-infiltrated copper foam composite PCM subject to pulsed heat boundary conditions up to 1 W cm−2 and demonstrate a decrease in thermal impedance by up to a factor of 2.5× in the regime in which melting occurs (τon = 10^−1 to 10^2 s) relative to a reference case in which melting does not occur. This represents both a signature of the ability to extract or retrieve thermal energy via latent heat, as well as an experimentally accessible measure that provides insight into the internal dynamics of a composite PCM volume. These principles can serve to design the internal structure of composite PCM elements for pulsed thermal systems.more » « less
-
Phase change materials (PCMs) are latent heat storage materials that can store or release thermal energy while undergoing thermodynamic phase transitions. Organic PCMs can be emulsified in water in the presence of surfactants to enhance thermal conductivity and enable applications as heat transfer fluids. However, PCM nanoemulsions often become unstable during thermal cycling. To better understand the molecular origins of phase stability in PCM nanoemulsions, we designed a model PCM nanoemulsion system and studied how the molecular-level environments and dynamics of the surfactants and oil phase changed upon thermal cycling using liquid-state nuclear magnetic resonance (NMR) spectroscopy. The model system used octadecane as the oil phase, stearic acid as the surfactant, and aqueous NaOH as the continuous phase. The liquid fraction of octadecane within the nanoemulsions was quantified noninvasively during thermal cycling by liquid-state 1H single-pulse NMR measurements, revealing the extent of octadecane supercooling as a function of temperature. The mean droplet size of the PCM nanoemulsions, measured by dynamic light scattering (DLS), was correlated with the liquid content of octadecane to explain phase instability in the solid−liquid coexistence region. Quantitative 13C single-pulse NMR experiments established that the carbonyl surfactant head groups were present in multiple distinct environments during thermal cycling. After repeated thermal cycling, the 13C signal intensity of the carbonyl surfactant head groups decreased, indicating that the surfactant head groups lost molecular mobility. The results explain, in part, the origin of phase instability of PCM nanoemulsions upon thermal cycling.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.3390/ma17194816
