skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Gap-Filled Dissolved Oxygen Data from the Ocean Observatories Initiative Endurance Array Inshore Moorings
Introduction The National Science Foundation Ocean Observatories Initiative (OOI) collects continuous in-situ measurements of dissolved oxygen (DO) on the Endurance Array moorings in the inner shelf region of the Oregon and Washington coasts. Aanderaa Optode 4831 oxygen sensors were deployed at 7 meters depth on the near surface instrument frame (NSIF) and on the collocated coastal surface piercing profiler (CSPP) moorings. The sensors suffer from calibration drift due to biofouling, which can cause a dramatic increase in DO during daylight hours and corresponding decrease at night compared to the conditions in the water column (Palevsky et al., 2023). This enhanced diel signal, when present, is much more pronounced on fixed-depth sensors and usually begins to occur 1-2 months after a mooring is deployed. After this biofouling issue was identified, OOI began deploying UV lamps adjacent to the oxygen sensor in spring 2018, after which there was substantial improvement in DO data quality. Each file in this dataset contains the measured near surface DO and the corrected near surface DO at the Oregon and Washington inner shelf surface moorings (ISSM) with gaps from periods of biofouling replaced with the DO measured by the CSPP.  Methods OOI oxygen data Dissolved oxygen sensors on OOI CSPPs and at fixed-depths on moorings are named “DOSTA”, a contraction of DO Stable Response. The DOSTA data are downloaded on a deployment-by-deployment basis for all available data streams (telemetered and recovered for fixed-depth moorings; recovered only for CSPPs) from the OOI Gold Copy THREDDs catalog. Each deployment file additionally contains the practical salinity, seawater temperature, and pressure measured by the collocated CTD. The telemetered and recovered data streams are combined and interpolated to a common timebase with one-minute resolution.  Evaluate fixed-depth oxygen data The NSIF DO data are quality-controlled using both automated and manual methods to create flags that follow the Quality Assurance of Real-Time Oceanographic Data (QARTOD) standards. Endurance array team members perform a visual inspection of oxygen and ancillary data from each deployment to determine instrument failure from biofouling or other issues. Annotations from human-in-the-loop analyses of failed or suspect data generate the QARTOD flags.    Merge profiler oxygen data QARTOD flags are applied to the CSPP data to omit failed data points. CSPP DO data are averaged from 2-7 meters depth then interpolated to the one-minute timebase. The resulting CSPP time series shows good agreement with the NSIF during data overlaps. Finally, the NSIF DO data is replaced with the CSPP DO data during periods of biofouling or instrument failure, flags are generated for the hybrid DO dataset, and separate netCDF files are created for the Oregon and Washington locations. Files Filename: CE01ISSM-NSIF-DOSTA.nc Description Oregon Coastal Endurance Site CE01, Inner Shelf Surface Mooring, Near Surface Instrument Frame, Dissolved Oxygen Stable Response Geographic Range Latitude: 44.6598 to 44.6598 Longitude: -124.095 to -124.095 Time Range Start: 2014-10-10, 18:00:00 UTC End: 2025-06-24, 20:00:00 UTC Variables: "time", ”depth”, "sea_water_practical_salinity", "sea_water_practical_salinity_qartod_results", "sea_water_temperature",  "sea_water_temperature_qartod_results", "measured_dissolved_oxygen", "measured_dissolved_oxygen_qartod_results", "corrected_dissolved_oxygen", "corrected_dissolved_oxygen_qartod_results" Filename: CE06ISSM-NSIF-DOSTA.nc Description Washington Coastal Endurance Site CE06, Inner Shelf Surface Mooring, Near Surface Instrument Frame, Dissolved Oxygen Stable Response Geographic Range Latitude: 47.1336 to 47.1336 Longitude: -124.272 to -124.272 Time Range Start: 2015-04-10, 05:00:00 UTC End: 2025-06-24, 20:00:00 UTC Variables: "time", ”depth”, "sea_water_practical_salinity", "sea_water_practical_salinity_qartod_results", "sea_water_temperature",  "sea_water_temperature_qartod_results", "measured_dissolved_oxygen", "measured_dissolved_oxygen_qartod_results", "corrected_dissolved_oxygen", "corrected_dissolved_oxygen_qartod_results"  more » « less
Award ID(s):
2244833
PAR ID:
10627738
Author(s) / Creator(s):
Publisher / Repository:
Zenodo
Date Published:
Format(s):
Medium: X
Right(s):
Creative Commons Attribution 4.0 International
Sponsoring Org:
National Science Foundation
More Like this
  1. (, US NSF Ocean Observatories Initiative)
    The Coastal Endurance Washington Inshore Surface Mooring is located on the inner Continental Shelf, approximately 30 meters deep. The Continental Shelf-Slope area off the Washington coast is a highly productive, dynamic upwelling environment. Upwelling brings nutrients to the surface sparking primary production and fueling the food web. In recent years, upwelling has also brought onto the shelf hypoxic, low oxygen, waters that can be harmful to organisms in the area. By sampling in this area, the OOI seeks to gain better insight into upwelling dynamics of this system. Like other coastal moorings, the Coastal Endurance Washington Inshore Surface Mooring is specifically designed to examine coastal-scale phenomena and withstand the challenging conditions of shallow coastal environments, including large tidal fluctuations. The Surface Mooring contains instruments attached to a Surface Buoy floating on the sea surface, Near Surface Instrument Frame 7 meters below the surface, and a Seafloor Multi-Function Node (MFN) located on the seafloor. The Surface Buoy provides a platform on which to secure surface instruments above the sea surface, below the sea surface, and across the interface between. Additionally the Surface Buoy contains an antenna to transmit data to shore via satellite. 
    more » « less
  2. (, US NSF Ocean Observatories Initiative)
    The Coastal Endurance Oregon Inshore Surface Mooring is located on the inner Continental Shelf, approximately 25 meters deep. The Continental Shelf-Slope area off the Oregon coast is a highly productive, dynamic upwelling environment. Upwelling brings nutrients to the surface sparking primary production and fueling the food web. In recent years, upwelling has also brought onto the shelf hypoxic, low oxygen, waters that can be harmful to organisms in the area. By sampling in this area, the OOI seeks to gain better insight into upwelling dynamics of this system. Like other coastal moorings, the Coastal Endurance Oregon Inshore Surface Mooring is specifically designed to examine coastal-scale phenomena and withstand the challenging conditions of shallow coastal environments, including large tidal fluctuations. The Surface Mooring contains instruments attached to a Surface Buoy floating on the sea surface, Near Surface Instrument Frame 7 meters below the surface, and a Seafloor Multi-Function Node (MFN) located on the seafloor. The Surface Buoy provides a platform on which to secure surface instruments above the sea surface, below the sea surface, and across the interface between. Additionally the Surface Buoy contains an antenna to transmit data to shore via satellite. 
    more » « less
  3. (, US NSF Ocean Observatories Initiative)
    The Coastal Endurance Washington Shelf Surface Mooring is located on the Continental Shelf, approximately 90 meters deep. The Continental Shelf-Slope area off the Washington coast is a highly productive, dynamic upwelling environment. Upwelling brings nutrients to the surface sparking primary production and fueling the food web. In recent years, upwelling has also brought onto the shelf hypoxic, low oxygen, waters that can be harmful to organisms in the area. By sampling in this area, the OOI seeks to gain better insight into upwelling dynamics of this system.\nLike other coastal moorings, the Coastal Endurance Washington Shelf Surface Mooring is specifically designed to examine coastal-scale phenomena and withstand the challenging conditions of shallow coastal environments, including large tidal fluctuations. The Surface Mooring contains instruments attached to a Surface Buoy floating on the sea surface, Near Surface Instrument Frame 7 meters below the surface, and a Seafloor Multi-Function Node (MFN) located on the seafloor. The Surface Buoy provides a platform on which to secure surface instruments above the sea surface, below the sea surface, and across the interface between. Additionally the Surface Buoy contains an antenna to transmit data to shore via satellite. 
    more » « less
  4. (, US NSF Ocean Observatories Initiative)
    The Coastal Endurance Oregon Shelf Surface Mooring is located on the Continental Shelf, approximately 80 meters deep. The Continental Shelf-Slope area off the Oregon coast is a highly productive, dynamic upwelling environment. Upwelling brings nutrients to the surface sparking primary production and fueling the food web. In recent years, upwelling has also brought onto the shelf hypoxic, low oxygen, waters that can be harmful to organisms in the area. By sampling in this area, the OOI seeks to gain better insight into upwelling dynamics of this system.\nLike other coastal moorings, the Coastal Endurance Oregon Shelf Surface Mooring is specifically designed to examine coastal-scale phenomena and withstand the challenging conditions of shallow coastal environments, including large tidal fluctuations. The Surface Mooring contains instruments attached to a Surface Buoy floating on the sea surface, Near Surface Instrument Frame 7 meters below the surface, and a Seafloor Multi-Function Node (MFN) located on the seafloor. The Surface Buoy provides a platform on which to secure surface instruments above the sea surface, below the sea surface, and across the interface between. Additionally the Surface Buoy contains an antenna to transmit data to shore via satellite. 
    more » « less
  5. (, US NSF Ocean Observatories Initiative)
    The Coastal Endurance Washington Offshore Surface Mooring is located on the Continental Slope, approximately 550 meters deep. The Continental Shelf-Slope area off the Washington coast is a highly productive, dynamic upwelling environment. Upwelling brings nutrients to the surface sparking primary production and fueling the food web. In recent years, upwelling has also brought onto the shelf hypoxic, low oxygen, waters that can be harmful to organisms in the area. By sampling in this area, the OOI seeks to gain better insight into upwelling dynamics of this system. Like other coastal moorings, the Coastal Endurance Washington Offshore Surface Mooring is specifically designed to examine coastal-scale phenomena and withstand the challenging conditions of shallow coastal environments, including large tidal fluctuations. The Surface Mooring contains instruments attached to a Surface Buoy floating on the sea surface, Near Surface Instrument Frame 7 meters below the surface, and a Seafloor Multi-Function Node (MFN) located on the seafloor. The Surface Buoy provides a platform on which to secure surface instruments above the sea surface, below the sea surface, and across the interface between. Additionally the Surface Buoy contains an antenna to transmit data to shore via satellite. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email