Search for: All records

Two Lab-on-Chip sensors, one measuring nitrate + nitrite (here after nitrate) and one measuring silicic acid (here after silicate), were deployed on the Ocean Observing Initiative (OOI) Southern Ocean Array surface mooring at a depth of approximately 12m on the near surface instrument frame in the southeast Pacific Ocean (-54 N, -89W). The nitrate sensor operated as expected for the full deployment period (6/12/2018 to 19/1/2020), collecting daily measurements. The silicate sensor operated as expected for almost ten months (until 1/10/2019), collecting up to four measurements per day. The OOI surface mooring was deployed in December 2018 on research cruise DY096 and recovered in January 2020 on research cruise DY112. The sensors and associated research cruises (DY096 and DY112) were supported by the Natural Environment Research Council (NERC) RoSES Carbon Uptake and Seasonal Trends in Antarctic Remineralisation Depth (CUSTARD) project. This material is based upon work supported by the Ocean Observatories Initiative, which is a major facility fully funded by the National Science Foundation (NSF). 

The hydrographic sampling performed by The NSF Ocean Observatories Initiative Coastal and Global Scale Nodes(OOI CGSN) as part of each Array turn represents a significant collection of valuable physical, chemical, and biological information. In addition to the CTD, collected hydrographic data include discrete oxygen, salinity, nutrient (nitrate, nitrite, silicate, phosphate, ammonium), chlorophyll, and carbon system measurements. These data serve several important functions. First, they are necessary for the calibration and evaluation of the moored instrumentation at each Array. Furthermore, the annual (Global) or biannual (Coastal) collection of data at the same locations provides a unique timeseries of a large set of water properties following established community standards and methods, independent of its association with the OOI moorings. The analysis of collected water samples for the parameters listed above are performed by a number of outside labs on behalf of OOI-CGSN. Consequently, the water sampling data for a given cruise is distributed among a number of different files. The Discrete Sampling Summary integrates the related CTD, metadata, and discrete water sample data into a single file. Additionally, it synthesizes qualitative and quantitative information about the quality of a measurement into data quality flags for each associated parameter which follow WOCE-standards. The final product is the Discrete Sampling Summary spreadsheet which contains the metadata, CTD data, and discrete water sample data into a single spreadsheet with data quality flags. This dataset includes hydrographic data from the Global Irminger Sea Array located in the North Atlantic to the southeast of Greenland.This region experiences high winds and large surface waves, strong atmosphere-ocean exchanges of energy and gases, carbon dioxide sequestration, high biological productivity, and an important fishery. It is one of the few places on Earth with deep-water formation that feeds the large-scale thermohaline circulation. 

Introduction The National Science Foundation Ocean Observatories Initiative (OOI) collects continuous in-situ measurements of dissolved oxygen (DO) on the Endurance Array moorings in the inner shelf region of the Oregon and Washington coasts. Aanderaa Optode 4831 oxygen sensors were deployed at 7 meters depth on the near surface instrument frame (NSIF) and on the collocated coastal surface piercing profiler (CSPP) moorings. The sensors suffer from calibration drift due to biofouling, which can cause a dramatic increase in DO during daylight hours and corresponding decrease at night compared to the conditions in the water column (Palevsky et al., 2023). This enhanced diel signal, when present, is much more pronounced on fixed-depth sensors and usually begins to occur 1-2 months after a mooring is deployed. After this biofouling issue was identified, OOI began deploying UV lamps adjacent to the oxygen sensor in spring 2018, after which there was substantial improvement in DO data quality. Each file in this dataset contains the measured near surface DO and the corrected near surface DO at the Oregon and Washington inner shelf surface moorings (ISSM) with gaps from periods of biofouling replaced with the DO measured by the CSPP.  Methods OOI oxygen data Dissolved oxygen sensors on OOI CSPPs and at fixed-depths on moorings are named “DOSTA”, a contraction of DO Stable Response. The DOSTA data are downloaded on a deployment-by-deployment basis for all available data streams (telemetered and recovered for fixed-depth moorings; recovered only for CSPPs) from the OOI Gold Copy THREDDs catalog. Each deployment file additionally contains the practical salinity, seawater temperature, and pressure measured by the collocated CTD. The telemetered and recovered data streams are combined and interpolated to a common timebase with one-minute resolution.  Evaluate fixed-depth oxygen data The NSIF DO data are quality-controlled using both automated and manual methods to create flags that follow the Quality Assurance of Real-Time Oceanographic Data (QARTOD) standards. Endurance array team members perform a visual inspection of oxygen and ancillary data from each deployment to determine instrument failure from biofouling or other issues. Annotations from human-in-the-loop analyses of failed or suspect data generate the QARTOD flags.    Merge profiler oxygen data QARTOD flags are applied to the CSPP data to omit failed data points. CSPP DO data are averaged from 2-7 meters depth then interpolated to the one-minute timebase. The resulting CSPP time series shows good agreement with the NSIF during data overlaps. Finally, the NSIF DO data is replaced with the CSPP DO data during periods of biofouling or instrument failure, flags are generated for the hybrid DO dataset, and separate netCDF files are created for the Oregon and Washington locations. Files Filename: CE01ISSM-NSIF-DOSTA.nc Description Oregon Coastal Endurance Site CE01, Inner Shelf Surface Mooring, Near Surface Instrument Frame, Dissolved Oxygen Stable Response Geographic Range Latitude: 44.6598 to 44.6598 Longitude: -124.095 to -124.095 Time Range Start: 2014-10-10, 18:00:00 UTC End: 2025-06-24, 20:00:00 UTC Variables: "time", ”depth”, "sea_water_practical_salinity", "sea_water_practical_salinity_qartod_results", "sea_water_temperature",  "sea_water_temperature_qartod_results", "measured_dissolved_oxygen", "measured_dissolved_oxygen_qartod_results", "corrected_dissolved_oxygen", "corrected_dissolved_oxygen_qartod_results" Filename: CE06ISSM-NSIF-DOSTA.nc Description Washington Coastal Endurance Site CE06, Inner Shelf Surface Mooring, Near Surface Instrument Frame, Dissolved Oxygen Stable Response Geographic Range Latitude: 47.1336 to 47.1336 Longitude: -124.272 to -124.272 Time Range Start: 2015-04-10, 05:00:00 UTC End: 2025-06-24, 20:00:00 UTC Variables: "time", ”depth”, "sea_water_practical_salinity", "sea_water_practical_salinity_qartod_results", "sea_water_temperature",  "sea_water_temperature_qartod_results", "measured_dissolved_oxygen", "measured_dissolved_oxygen_qartod_results", "corrected_dissolved_oxygen", "corrected_dissolved_oxygen_qartod_results" 

This data set consists of 3,244 gridded, daily averaged temperature, practical salinity, potential density, and dissolved oxygen profiles. These profiles were collected from October 2014 to May 2025 by the NSF Ocean Observatories Initiative Washington Offshore Profiler Mooring (CE09OSPM) located at 46.8517°N, 124.982°W between approximately 35 and 510 meters water depth using a McLane® Moored Profiler (MMP). The MMP was equipped with a Sea-Bird Scientific 52-MP (SBE 52-MP) CTD instrument and an associated Sea-Bird Scientific (SBE 43F) dissolved oxygen sensor. Raw binary data files [C*.DAT (CTD data); E*.DAT (engineering data plus auxiliary sensor data) and A*.DAT (current meter data)] were converted to ASCII text files using the McLane® Research Laboratories, Inc. Profile Unpacker v3.10 application. Dissolved oxygen calibration files for each of the twenty deployments were downloaded from the Ocean Observatories Initiative asset-management GitHub® repository.  The unpacked C*.TXT (CTD data); E*.TXT (engineering data plus auxiliary sensors) and A*.TXT (current meter data) ASCII data files associated with each deployment were processed using a MATLAB® toolbox that was specifically created to process OOI MMP data. The toolbox imports MMP A*.TXT, C*.TXT, and E*.TXT data files, and applies the necessary calibration coefficients and data corrections, including adjusting for thermal-lag, flow, and sensor time constant effects. mmp_toolbox calculates dissolved oxygen concentration using the methods described in Owens and Millard (1985) and Garcia and Gordon (1992). Practical salinity and potential density are derived using the Gibbs-SeaWater Oceanographic Toolbox. After the corrections and calculations for each profile are complete, the data are binned in space to create a final, 0.5-dbar binned data set. The more than 24,000 individual temperature, practical salinity, pressure, potential density, and dissolved oxygen profiles were temporally averaged to form the final, daily averaged data set presented here. Using the methods described in Risien et al. (2023), daily temperature, practical salinity, potential density, and dissolved oxygen climatologies were calculated for each 0.5-dbar depth bin using a three-harmonic fit (1, 2, and 3 cycles per year) based on the 10-year period January 2015 to December 2024. 

The Ocean Observatories Initiative (OOI) deployed both the In-Situ Ultraviolet Spectrophotometer (ISUS) and Submersible Underwater Nitrate Sensor (SUNA) for continuous, in-situ measurement of nitrate. At the Pioneer-New England Shelf Array (Pioneer-NES), ISUS/SUNA sensors were deployed at 7-meters depth at the Inshore (ISSM), Central (CNSM), and Offshore (OSSM) Surface Mooring locations. The SUNA sensor replaced the ISUS sensors spring 2018. The SUNA was a major improvement in technology, with significant improvements in accuracy and precision. However, it still suffers from calibration drift due to lamp fatigue and biofouling as well as spectral interference due to bromide and fluorometric CDOM. Drift is corrected by application of post-cruise calibrations to recalculate the temperature-and-salinity corrected nitrate concentration following Sakamoto (2009a) and estimating a linear drift between pre-and-post cruise deployments. Validation is performed by comparison with discrete water samples collected during deployment/recovery of the sensors. These datasets include the nitrate data from the Pioneer-NES ISSM (CP03ISSM-RID26-07-NUTNRB000.nc), CNSM (CP01CNSM-RID26-07-NUTNRB000.nc), and OSSM (CP04OSSM-RID26-07-NUTNRB000.nc) SUNA instruments spanning Spring 2018 through Fall 2022. Each dataset contains the measured nitrate, the temperature-salinity corrected nitrate, the drift-corrected nitrate, and the nitrate following validation with bottle samples. 

## Kamchatka M8.8 Earthquake and Tsunamis Reach Across the Pacific to NSF’s OOI Regional Cabled Array   Deborah Kelley1, Joe Duprey1, Wendi Ruef1, and W. Chadwick2   1University of Washington, 2Oregon State University   On July 29 at 23:24:52 UTC, a powerful magnitude 8.8 earthquake struck the Kamchatka Peninsula in Russia, unleashing seismic energy and a tsunami that surged across the Pacific Ocean. This extraordinary event was captured in remarkable detail by the NSF Ocean Observatories Initiative’s (OOI) Regional Cabled Array—a seafloor observatory located offshore Oregon and Washington and one of the world’s most advanced underwater monitoring networks, with over 150 instruments transmitting real-time data to shore at the speed of light.   At 23:33:15, the seismic waves from the Kamchatka earthquake reached Axial Seamount, located nearly 300 miles west of the Oregon coast and almost a mile beneath the ocean’s surface, having crossed the entire Pacific in just nine minutes. The vibrations were so intense they rattled a seafloor instrument continuously for over four hours (a,b).   Then, at 06:03:00 UTC on July 30—6 hours and 30 minutes after the quake—the first tsunami waves arrived at Axial Seamount (c). Ultra-sensitive pressure sensor on bottom pressure tilt instruments picked up the waves with astonishing clarity. Lower-resolution sensors across the array also tracked the tsunami’s journey toward the UW west coast. Racing at speeds of 270 miles per hour, the first wave swept across the Juan de Fuca Plate and over the Cascadia Subduction Zone, eventually reaching seafloor monitoring instruments at the Oregon Shelf site just 14 miles offshore from Newport, Oregon. The OOI Regional Cabled Array instruments showed that the Pacific Ocean reverberated with smaller waves for several days after the first tsunami waves arrived—echoes of one of the most powerful seismic events ever recorded.   This event highlights not only the dynamic nature of our planet and the seismic and tsunami hazards that we have to be prepared for in the Pacific Northwest, but also the incredible capability of modern science to observe and understand these kinds of events—in real time from deep beneath the ocean’s surface, and the value of such monitoring to coastal communities.   ## Bottom Pressure and Tilt Meter Notes BOTPT LILY tiltmeter data (csvs) are curated by William Chadwick. The tilt units are microradians, or µrad.   BOTPT-MJ03F-BPR-29July-to-01Aug2025-15sec.csv Date/Time, Pressure (psi) with tides, De-tided Depth (m) - from 29 July @ 00:00 to 01 August @ 00:00, and a record every 15 seconds (from the NANO bottom pressure sensor)   BOTPT-MJ03F-LILY-tilt-data-29-30July2025-01sec.csv Date/Time, X-tilt, Y-tilt - from 29 July @ 00:00 to 30 July @ 23:13, and a record every 1 second (from the LILY tiltmeter)   ## Where to find Additional Data Additional data from the included sensors prior to and after the event, or from OOI's many co-located sensors can be obtained through the OOI data portal https://ooinet.oceanobservatories.org/ , the OOI data explorer https://dataexplorer.oceanobservatories.org/ or OOI's M2M API service https://oceanobservatories.org/m2m/.   ## Contact Information jduprey@uw.edu   This material is based upon work supported by the Ocean Observatories Initiative (OOI), a major facility fully funded by the US National Science Foundation under Cooperative Agreement No. 2244833, and the Woods Hole Oceanographic Institution OOI Program Office. 

The hydrographic sampling performed by OOI-CGSN (the Ocean Observatories Initiative - Coastal and Global Scale Nodes) part of each Array turn represents a significant collection of valuable physical, chemical, and biological information. In addition to the CTD, collected hydrographic data include discrete oxygen, salinity, nutrient (nitrate, nitrite, silicate, phosphate, ammonium), chlorophyll, and carbon system measurements. These data serve several important functions. First, they are necessary for the calibration and evaluation of the moored instrumentation at each Array. Furthermore, the annual (Global) or biannual (Coastal) collection of data at the same locations provides a unique time series of a large set of water properties following established community standards and methods, independent of its association with the OOI moorings. The analyses of collected water samples for the parameters listed above are performed by a number of outside labs on behalf of OOI-CGSN. Consequently, the water sampling data for a given cruise is distributed among a number of different files. The Discrete Sampling Summary integrates the related CTD, metadata, and discrete water sample data into a single file. Additionally, it synthesizes qualitative and quantitative information about the quality of a measurement into data quality flags for each associated parameter which follow WOCE-standards. The final product is the Discrete Sampling Summary spreadsheet which contains the metadata, CTD data and discrete water sample data into a single spreadsheet with data quality flags. This dataset includes hydrographic data from the Global Southern Ocean Array. The Global Southern Ocean Array was located in the high-latitude South Pacific, west of the Southern tip of Chile in an area of large scale thermohaline circulation, intermediate water formation , and CO2 sequestration. It permitted examination of linkages between the Southern Ocean and the Antarctic, including strengthening westerly winds and upwelling. This array was in place from February 2015 to January 2020 when it was removed. 

This repository contains hourly Shelfbreak jet transport (Sv) derived from the three central moorings of the OOI Coastal Pioneer Array (https://ooinet.oceanobservatories.org/).  Transport is computed from east velocity component (u, in m/s), which is then depth integrated from 15 until 115m. The depth integrated velocity (m2/s) is transformed in transport considering a jet width of 40 km, and then converted into Sv (by dividing by 10^6 factor). Thus, to convert the transport time series back to m2/s, the time series must be divided by 4.10^10. Tides were removed from the velocity component, with Utide harmonic estimation, using the 68 standard tidal coefficients, except for the Semi-annual and Annual components (Sa and SSa). First column: date (datetime format, year-month-day hour:min:second)Second column: Qy (jet transport, in Sv)   accompanying paper: Camargo, C. M. L., Piecuch, C. G., & Raubenheimer, B. (2024). From Shelfbreak to Shoreline: Coastal sea level and local ocean dynamics in the northwest Atlantic. Geophysical Research Letters, 51, e2024GL109583. https://doi.org/10.1029/2024GL109583 

The Pioneer MAB Southern Profiler Mooring is located on the Continental Shelf, approximately 100 meters deep. The MAB continental shelf north of Cape Hatteras is characterized by a persistent equator-ward current originating from the north, a shelfbreak front separating shelf and slope waters, distributed buoyancy inputs from rivers, variable wind forcing, and intermittent offshore forcing by Gulf Stream meanders. The Pioneer MAB Array is designed to resolve transport processes and ecosystem dynamics in the vicinity of the shelfbreak front, which is a region of complex oceanographic dynamics, intermittent mesoscale variability, and enhanced biological productivity.\nLike other Coastal Profiler Moorings, the Pioneer MAB Southern Profiler Mooring instruments are mounted on the Surface Buoy, Subsurface Sphere, within the Wire-Following Profiler, and on a frame on the riser wire. The Wire-Following Profiler moves through the water column along the mooring riser, continuously sampling ocean characteristics over a specified depth interval. The instruments communicate with the Surface Buoy through the inductive riser wire. Additionally, the Surface Buoy contains antennas to transmit data to shore via satellite.