skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


This content will become publicly available on August 18, 2026

Title: Ozonolysis of phenolic aldehydes from industrial-based lignin wastewaters
Phenolic aldehydes are widespread pollutants in water and soil, originating from lignin-based agro-industries. With increasing wastewater pollution, improved treatment systems are necessary to degrade phenolic aldehydes into less hazardous compounds. Over the past two decades, ozonolysis wastewater treatment has been implemented in the United States, Japan, and South Korea. However, the mechanistic understanding of phenolic aldehyde ozonolysis in water remains incomplete. This study investigates the ozonolysis of three model phenolic aldehydes (syringaldehyde, vanillin, 4-hydroxybenzaldehyde) in representative concentrations for wastewater of 0.5–1.5 mM and pH 4–8. Each compound solution was sparged for 30 min at a fixed O3(g) flow (0.20 to 1.00 L min−1), providing steady-state dissolved concentrations of 5.4 to 16.2 μM. Reactant loss and product generation were monitored using UV–visible (UV–vis) spectroscopy, ultra-high pressure liquid chromatography (UHPLC) with UV–vis and mass spectrometry (MS) detection, and ion chromatography with conductivity and MS detection of anions. Identified products based on their mass-to-charge ratio (m/z−) included oxalic acid (89), glycolic acid (75), formic acid (45), and maleic acid (115). Additional intermediate products were identified under various reaction conditions, revealing competing mechanisms in the degradative oxidation of aqueous phenolic aldehydes exposed to O3(g). A unifying mechanism is proposed to explain the production of smaller, less toxic molecules during phenolic aldehyde ozonolysis, enhancing water quality. This mechanism serves as a basis for evaluating the implementation of ozonolysis in scaled-up water treatment processes.  more » « less
Award ID(s):
2403875 1922694
PAR ID:
10629574
Author(s) / Creator(s):
; ; ;
Editor(s):
Gan, Jay; Hopke, Philip; Ouyang, Wei; Paoletti, Elena
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Science of The Total Environment
Volume:
998
ISSN:
0048-9697
Page Range / eLocation ID:
180190
Subject(s) / Keyword(s):
Water quality Water treatment Oxidation Pollutant degradation Biomass waste
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Iodinated disinfection by-products (I-DBPs) are of growing concern due to their elevated toxicity compared to their chlorinated counterparts, with links to adverse health effects such as bladder cancer and miscarriages. Medical imaging agents like iohexol, commonly used in healthcare facilities, introduce iodine into wastewater systems. This study investigates the photodegradation of iohexol and the subsequent formation of products, including I-DBPs, during simulated final wastewater treatment under chlorination and sunlight exposure. Experiments were conducted with solutions containing 30 μM iohexol, 3 mg L−1 humic acids, and 5.5 mg L−1 hypochlorite. Samples were irradiated at λ ≥ 295 nm and subject to ion chromatography monitoring of I−, IO3−, Cl−, and ClO3−, providing mechanistic insight into the fate of iodide released from iohexol. UV-visible spectroscopy was employed to monitor the degradation profile of iohexol and the concurrent release of iodide. Electrospray ionization mass spectrometry (ESI-MS) identified a range of anionic products based on their mass-to-charge ratios (m/z), including low molecular weight carboxylic acids, their carcinogenic haloacetic derivatives (chloroacetic acid (m/z 93), iodoacetic acid (IAA, m/z 185), and hydroxyiodoacetic acid (m/z 201)) as well as phenolic halides. Notably, IAA was present at a concentration of 0.16 μM at the conclusion of the reaction. These findings elucidate photodeiodination-coupled radical attack, photooxidative cleavage, and halogenation transformation pathways of iodinated compounds during disinfection and underscore the potential risks associated with their presence in wastewater. The results provide valuable insights for medical facilities and wastewater treatment plants aiming to mitigate the formation of hazardous I-DBPs. 
    more » « less
  2. We hereby report the synthesis, characterization, and computational analysis of novel bimetallic PdRu nanoparticles (PdRuNPs) using the quercetin-para aminobenzoic acid (QPABA) ligand and their application in developing a sensitive and scalable electrochemical system for effective detection and degradation of 1,4-dioxane in water samples. The fabricated nanocatalysts were subjected to UV–visible spectroscopy, particle size analyzer, XRD, SEM, STEM–EDX, TEM, and FTIR. Also, the DFT B3LYP computational study shows that stable PdRuNPs form through Pd and Ru interactions with QPABA at the carboxyl OH sites on the G and F rings, respectively. The limit of detection for 1,4-dioxane was determined to be 0.034 ppb, which is below the U.S. Environmental Protection Agency’s advisory range. Additionally, combining liquid–liquid extraction with GC–MS for the detection of 1,4-dioxane registered a method detection limit of 0.033 ppb in real wastewater samples. In the scaled-up system, three actual wastewaters from a wastewater treatment plant in New Jersey containing 1,4-dioxane up to 300 ppm were able to be 100% removed within 30 min. In addition, LC–MS analysis revealed the final reduction of 1,4-dioxane to carbon dioxide and water. This study provides a reliable method for the scalable and simultaneous detection and degradation of hazardous chemicals, enhancing the environmental safety. 
    more » « less
  3. The availability of water-soluble nanoparticles allows catalytic reactions to occur in highly desirable green environments. The catalytic activity and selectivity of water-soluble palladium nanoparticles capped with 6-(carboxylate)hexanethiolate (C6-PdNP) and 5-(trimethylammonio)pentanethiolate (C5-PdNP) were investigated for the reduction of 4-nitrophenol, the oxidation of α,β-conjugated aldehydes, and the C-C coupling of phenylboronic acid. The study showed that between the two PdNPs, C6-PdNP exhibits better catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride and the selective oxidation of conjugated aldehydes to conjugated carboxylic acids. For the latter reaction, molecular hydrogen (H2) and H2O act as oxidants for the surface palladium atoms on PdNPs and conjugated aldehyde substrates, respectively. The results indicated that the competing addition activities of Pd-H and H2O toward the π-bond of different unsaturated substrates promote either reduction or oxidation reactions under mild conditions in organic solvent-free environments. In comparison, C5-PdNP exhibited higher catalytic activity for the C-C coupling of phenylboronic acid. Gas chromatography–mass spectrometry (GC-MS) was mainly used as an analytical technique to examine the products of catalytic reactions. 
    more » « less
  4. Abstract. Dry deposition of ozone (O3) to the ocean surface and the ozonolysis of organics in the sea surface microlayer (SSML) are potential sources of volatile organic compounds (VOCs) to the marine atmosphere. We use a gas chromatography system coupled to a Vocus proton-transfer-reaction time-of-flight mass spectrometer to determine the chemical composition and product yield of select VOCs formed from ozonolysis of coastal seawater collected from Scripps Pier in La Jolla, California. Laboratory-derived results are interpreted in the context of direct VOC vertical flux measurements made at Scripps Pier. The dominant products of laboratory ozonolysis experiments and the largest non-sulfur emission fluxes measured in the field correspond to Vocus CxHy+ and CxHyOz+ ions. Gas chromatography (GC) analysis suggests that C5–C11 oxygenated VOCs, primarily aldehydes, are the largest contributors to these ion signals. In the laboratory, using a flow reactor experiment, we determine a VOC yield of 0.43–0.62. In the field at Scripps Pier, we determine a maximum VOC yield of 0.04–0.06. Scaling the field and lab VOC yields for an average O3 deposition flux and an average VOC structure results in an emission source of 10.7 to 167 Tg C yr−1, competitive with the DMS source of approximately 20.3 Tg C yr−1. This study reveals that O3 reactivity to dissolved organic carbon can be a significant carbon source to the marine atmosphere and warrants further investigation into the speciated VOC composition from different seawater samples and the reactivities and secondary organic aerosol (SOA) yields of these molecules in marine-relevant, low NOx conditions. 
    more » « less
  5. A C-N cross-coupling approach involving oxidative amidations of aromatic aldehydes in the presence of an amide-based nickel(II) pincer catalyst (2) is demonstrated. Upon optimization, quick reaction times (15 min) and an ideal temperature (25 °C) were established and implemented for the conversion of 33 different amide products using only 0.2 mol% of catalyst. Moderate to good turnover numbers (TONs) were obtained for secondary benzamide products, and moderate TONs were obtained for tertiary benzamide products, with the highest turnover number calculated for the 4-chloro-N-(3-phenylpropyl)benzamide product (4i, 309). Gas chromatographic–mass spectrometric (GC–MS) analysis also indicates the formation of alcohols in different reactions, indicating an oxidative amidation process. Kinetic studies were performed by varying the amount of catalyst, aldehyde, LiHMDS base, and amine substrate to determine the order of reaction for each component. Benzaldehyde and benzaldehyde-d6 were reacted with benzylamine, and the kH/kD ratio was determined to understand the rate-determining step. Isotope labeling further revealed that deuterium was being transferred to both the alcohol side product and the target amide product. With the help of kinetic data and UV–visible spectra, a mechanism for the amidation process via the catalyst (2) is proposed through a Ni(I)–Ni(III) pathway. 
    more » « less