An official website of the United States government
Atmospheric cold fronts can periodically generate storm surges and affect sediment transport in the Northern Gulf of Mexico (NGOM). In this paper, we evaluate water circulation spatiotemporal patterns induced by six atmospheric cold front events in the Wax Lake Delta (WLD) in coastal Louisiana using the 3-D hydrodynamic model ECOM-si. Model simulations show that channelized and inter-distributary water flow is significantly impacted by cold fronts. Water volume transport throughout the deltaic channel network is not just constrained to the main channels but also occurs laterally across channels accounting for about a quarter of the total flow. Results show that a significant landward flow occurs across the delta prior to the frontal passage, resulting in a positive storm surge on the coast. The along-channel current velocity dominates while cross-channel water transport occurs at the southwest lobe during the post-frontal stage. Depending on local weather conditions, the cold-front-induced flushing event lasts for 1.7 to 7 days and can flush 32–76% of the total water mass out of the system, a greater range of variability than previous reports. The magnitude of water flushed out of the system is not necessarily dependent on the duration of the frontal events. An energy partitioning analysis shows that the relative importance of subtidal energy (10–45% of the total) and tidal energy (20–70%) varies substantially from station to station and is linked to the weather impact. It is important to note that within the WLD region, the weather-induced subtidal energy (46–66% of the total) is much greater than the diurnal tidal energy (13–25% of the total). The wind associated with cold fronts in winter is the main factor controlling water circulation in the WLD and is a major driver in the spatial configuration of the channel network and delta progradation rates.
more »
« less
This content will become publicly available on February 1, 2026
Frontal Maintenance in Submesoscale Flows
Abstract Classic deformation theory includes parameters—divergence, total strain, and vorticity—that are invariant to changes in the coordinate system. However, these parameters are sometimes ambiguous with respect to characterizing how fronts are formed and maintained because the presence of a front imposes a reference coordinate system. To help remedy this ambiguity, we propose a framework in frontal coordinates based on along- and cross-front velocity gradients to better characterize frontal maintenance, which can also be used to define divergence and normal strain in frontal coordinates. The framework with these four parameters (along-, cross-front velocity gradients, divergence, and normal strain in frontal coordinate) defines eight characteristic flow types at a front, providing a complete characterization of the flow that strengthens or weakens a front. This framework highlights the importance of the “strain efficiency” concept, which unambiguously defines the contribution of total strain to frontogenesis. Two examples, one based on a realistic simulation of submesoscales in the northern Gulf of Mexico and the other based on an idealized model with similar flow characteristics, are provided to demonstrate how this framework can be used to enhance our understanding of frontal dynamics in submesoscale flows.
more »
« less
- Award ID(s):
- 1851470
- PAR ID:
- 10630340
- Publisher / Repository:
- American Geophysical Union
- Date Published:
- Journal Name:
- Journal of Physical Oceanography
- Volume:
- 55
- Issue:
- 2
- ISSN:
- 0022-3670
- Page Range / eLocation ID:
- 175 to 190
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Locally enhanced biological production and increased carbon export are persistent features at oceanic density fronts. Studies often assume biological properties are uniform along fronts or hypothesize that along‐ and across‐front gradients reflect physical‐biological processes occurring in the front. However, the residence times of waters in fronts are often shorter than biological response times. Thus, an alternate—often untested—hypothesis is that observed biological patchiness originates upstream of a front. To test these two hypotheses, we explore an eddy‐associated front in the California Current System sampled during two surveys, separated by 3 weeks. Patches of high phytoplankton biomass were found at the northern ends of both surveys, and phytoplankton biomass decreased along the front. While these patches occurred in similar locations, it was unclear whether the same patch was sampled twice, or whether the two patches were different. Using an advection‐reaction framework combined with field and satellite data, we found that variations in along‐front gradients in dissolved oxygen, particle biovolume, and salinity support the conclusion that the two phytoplankton patches were different. They were only coincidentally sampled in similar locations. Backward‐ and forward‐in‐time tracking of water parcels showed that these phytoplankton patches had distinct origins, associated with specific, strong coastal upwelling pulses upstream of the front. Phytoplankton grew in these recently upwelled waters as they advected into and along the frontal system. By considering both local and upstream physical‐biological forcings, this approach enables better characterizations of critical physical and biogeochemical processes that occur at fronts across spatial and temporal scales.more » « less
-
Abstract Observations from a tidal estuary show that tidal intrusion fronts occur regularly during flood tides near topographic features including constrictions and bends. A realistic model is used to study the generation of these fronts and their influence on stratification and mixing in the estuary. At the constriction, flow separation occurs on both sides of the jet flow downstream of the narrow opening, leading to sharp lateral salinity gradients and baroclinic secondary circulation. A tidal intrusion front, with a V-shaped convergence zone on the surface, is generated by the interaction between secondary circulation and the jet flow. Stratification is created at the front due to the straining of lateral salinity gradients by secondary circulation. Though stratification is expected to suppress turbulence, strong turbulent mixing is found near the surface front. The intense mixing is attributed to enhanced vertical shear due to both frontal baroclinicity and the twisting of lateral shear by secondary circulation. In the bend, flow separation occurs along the inner bank, resulting in lateral salinity gradients, secondary circulation, frontogenesis, and enhanced mixing near the front. In contrast to the V-shaped front at the constriction, an oblique linear surface convergence front occurs in the bend, which resembles a one-sided tidal intrusion front. Moreover, in addition to baroclinicity, channel curvature also affects secondary circulation, frontogenesis, and mixing in the bend. Overall in the estuary, the near-surface mixing associated with tidal intrusion fronts during flood tides is similar in magnitude to bottom boundary layer mixing that occurs primarily during ebbs.more » « less
-
ABSTRACT A trithiol‐triacrylate gel system for frontal polymerization was explored to establish the gelation time, shelf life, and frontal kinetics. The free‐standing gels were created by triethylamine‐catalyzed Michael addition of trimethylolpropane tris(3‐mercaptopropionate) to trimethylolpropane triacrylate such that sufficient acrylate functional groups were left unreacted to allow free‐radical frontal polymerization with the initiator 1,1‐bis(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane (Luperox 231). Systems with gelation times between 30 and 60 min that support frontal polymerization after up to 28 days of storage were achieved. The front velocity was found to depend on the 1,1‐bis(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane concentration. However, the amount of triethylamine, which was used to catalyze gel formation, did not significantly affect front velocity. The gel diameter and addition of milled carbon fiber (Zoltek px35) affected the front velocity. Cracks during frontal polymerization were reduced when Zoltek px35 was added to the formulation, which also increased the mechanical strength. Complex geometries of free‐standing gels were successfully polymerized. This system is potentially useful in situations where molding and reshaping gels are required prior to frontal polymerization, as well as enabling the ability to examine how mechanical forces like stretching and compression can affect front kinetics.more » « less
-
Coastal Autonomous Underwater Vehicles (AUVs) are Mobile Assets that survey the area in and around the array of moorings at the Coastal Pioneer MAB Array. Two Coastal AUVs (HII REMUS-600 AUVs) travel along transects across the shelf-break frontal system extending beyond the mooring array, covering an area approximately 1000 square kilometers in size centered on the array of moorings. The primary role of the AUVs is to resolve cross- and along-front “eddy fluxes” due to frontal instabilities, wind forcing, and mesoscale variability. These AUVs travel along saw-toothed transects, penetrating the sea surface and diving down to a maximum depth of 600 meters.more » « less
