skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on February 21, 2026

Title: Making nanomaterial-enabled nitrate sensors useful for real water systems: user-centric design perspectives
Water quality monitoring is essential for identifying risks to environmental and human health. Nitrate monitoring is of particular importance, as its anthropogenic point and nonpoint sources are common globally and have deleterious effects on water quality and usability as well as aquatic ecosystem health. Standard methods for assessing nitrate concentrations in water generally involve laboratory techniques, as methods available for field testing face significant tradeoffs between cost, precision, and portability. Given its relatively ubiquitous nature and the widespread regulation of nitrate pollution, it is a prime target for sensor development. The growing field of nanomaterials (e.g., nanoparticles, nanotubes, and 2-dimensional materials) offers the potential to eliminate these tradeoffs through a new generation of field-ready nitrate sensors. However, transitioning nano-sensors from the lab to the field remains challenging. In this perspective we examine the challenges of lab-to-field transition of nano-sensors for nitrate, highlighting the importance of a user-centered design approach under the framework of FOCUS (form factor, operational robustness, cost, user interface, and sensitivity).  more » « less
Award ID(s):
2125510
PAR ID:
10633242
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Frontiers
Date Published:
Journal Name:
Frontiers in Sensors
Volume:
6
ISSN:
2673-5067
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, PLOS ONE)
    Larsen, Stefano (Ed.)
    Real-time monitoring usingin-situsensors is becoming a common approach for measuring water-quality within watersheds. High-frequency measurements produce big datasets that present opportunities to conduct new analyses for improved understanding of water-quality dynamics and more effective management of rivers and streams. Of primary importance is enhancing knowledge of the relationships between nitrate, one of the most reactive forms of inorganic nitrogen in the aquatic environment, and other water-quality variables. We analysed high-frequency water-quality data fromin-situsensors deployed in three sites from different watersheds and climate zones within the National Ecological Observatory Network, USA. We used generalised additive mixed models to explain the nonlinear relationships at each site between nitrate concentration and conductivity, turbidity, dissolved oxygen, water temperature, and elevation. Temporal auto-correlation was modelled with an auto-regressive–moving-average (ARIMA) model and we examined the relative importance of the explanatory variables. Total deviance explained by the models was high for all sites (99%). Although variable importance and the smooth regression parameters differed among sites, the models explaining the most variation in nitrate contained the same explanatory variables. This study demonstrates that building a model for nitrate using the same set of explanatory water-quality variables is achievable, even for sites with vastly different environmental and climatic characteristics. Applying such models will assist managers to select cost-effective water-quality variables to monitor when the goals are to gain a spatial and temporal in-depth understanding of nitrate dynamics and adapt management plans accordingly. 
    more » « less
  2. ; ; ; ; (, CSAC2021: 1st International Electronic Conference on Chemical Sensors and Analytical Chemistry, session Materials for Chemical Sensing.)
    Paper-based microfluidic technology is a relatively new field of research that provides low-cost platforms and sensors for point-of-care diagnostics. While the majority of research in this field has been for biomedical applications, more and more paper-based devices and platforms are being designed and developed for environmental applications such as water quality monitoring and assessment. One such application is the detection of nitrate in water samples. Colorimetric detection of nitrate by paper-based devices using the Griess assay requires the reduction of nitrate to nitrite before undergoing the reaction. In this paper, we measured the performance of a paper-based dip strip for detecting nitrate and nitrite by calculating its limit of detection and limit quantification. We also calculated the reduction efficiency of vanadium (III) chloride in the dip strip for detecting nitrate. Our results show that the reduction time of nitrate via vanadium (III) chloride is much longer than that when using zinc microparticles. Our results also show that the performance of the dip strip using vanadium (III) chloride for nitrate detection is not as good as more intricate paper-based devices that have a separate reaction zone with zinc microparticles. The limits of detection and quantification calculated were 3.352 ppm and 7.437 ppm and the nitrate reduction efficiency varied over the range of nitrate concentrations tested. 
    more » « less
  3. ; (, Hydrological Processes)
    Abstract Midwestern cities require forecasts of surface nitrate loads to bring additional treatment processes online or activate alternative water supplies. Concurrently, networks of nitrate monitoring stations are being deployed in river basins, co‐locating water quality observations with established stream gauges. However, tools to evaluate the future value of expanded networks to improve water quality forecasts remains challenging. Here, we construct a synthetic data set of stream discharge and nitrate for the Wabash River Basin—one of the United States’ most nutrient polluted basins—using the established Agro‐IBIS and THMB models. Synthetic data enables rapid, unbiased and low‐cost assessment of potential sensor placements to support management objectives, such as near‐term forecasting. Using the synthetic data, we established baseline 1‐day forecasts for surface water nitrate at 12 cities in the basin using support vector machine regression (SVMR; RMSE 0.48–3.3 ppm). Next, we used the SVMRs to evaluate the improvement in forecast performance associated with deployment of additional nitrate sensors. We identified the optimal sensor placement to improve forecasts at each city, and the relative value of sensors at each candidate location. Finally, we assessed the co‐benefit realized by other cities when a sensor is deployed to optimize a forecast at one city, finding significant positive externalities in all cases. Ultimately, our study explores the potential for machine learning to make near‐term predictions and critically evaluate the improvement realized by expanding a monitoring network. While we use nitrate pollution in the Wabash River Basin as a case study, this approach could be readily applied to any problem where the future value of sensors and network design are being evaluated. 
    more » « less
  4. ; ; (, JAWRA Journal of the American Water Resources Association)
    ABSTRACT Agricultural nitrate pollution is a major threat to water quality in Iowa. Iowa uses a majority of its land for row crop agriculture and maintains a large livestock population, which together cause high nitrate loads in streams. High‐frequency stream nitrate data can aid policy decisions for reducing nitrate emissions by identifying streams with high nitrate loads, historical trends of improvement or deterioration in nitrate loads, and land use or practice changes that affect water quality. We developed a time series regression model framework to supplement existing sensor data and predict daily nitrate loads in Iowa streams lacking nitrate monitoring. Using nitrate data from statewide and national resources, this framework was trained and validated using 11 study sites of diverse geography and land use in Iowa. Partial least squares regression (PLSR) was used with geographical predictors, including land use, hydrogeology, and meteorology, to predict streamflow‐nitrate load relationships across the study sites. The developed PLSR model, combined with daily streamflow data, was then used to predict daily nitrate loads with high accuracy over a three‐year study period with a mean Kling–Gupta Efficiency of 0.74. Our framework was then used to estimate mean nitrate concentrations at 34 sites that lack nitrate sensors, demonstrating a low‐cost, facile method for the accurate prediction of daily nitrate loads in Iowa streams. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Chemical Physics Letters)
    The adoption of single-use plastics for fabricating lab-on-chip devices used in sensors, chemical and biomedical processes is escalating into a major environmental issue. To address the global need for developing long-term sustainable solutions, we present wood microfluidics as an alternative for electrochemical sensing. The lab-on- wood-chip (LOWC) device developed in this study demonstrated (i) versatility in electrochemical applications (electropolymerization and corrosion analysis), (ii) stability under highly acidic (pH 0.5), basic (pH 14.0) and varied temperature (4◦–60 ◦C) conditions (iii) long-term consistency in performance (>12 months), and (iv) potential for on-field nitrate sensing towards environmental monitoring – in a cost-effective, simple and sustainable manner. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email