skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Importance of gas heating in capacitively coupled radiofrequency plasma-assisted synthesis of carbon nanomaterials
Abstract In pursuit of diamond nanoparticles, a capacitively-coupled radio frequency flow-through plasma reactor was operated with methane-argon gas mixtures. Signatures of the final product obtained microscopically and spectroscopically indicated that the product was an amorphous form of graphite. This result was consistent irrespective of combinations of the macroscopic reactor settings. To explain the observed synthesis output, measurements of C2and gas properties were carried out by laser-induced fluorescence and optical emission spectroscopy. Strikingly, the results indicated a strong gas temperature gradient of 100 K per mm from the center of the reactor to the wall. Based on additional plasma imaging, a model of hot constricted region (filamentation region) was then formulated. It illustrated that, while the hot constricted region was present, the bulk of the gas was not hot enough to facilitate diamondsp3formation: characterized by much lower reaction rates, when compared tosp2,sp3formation kinetics are expected to become exponentially slow. This result was further confirmed by experiments under identical conditions but with a H2/CH4mixture, where no output material was detected: if graphiticsp2formation was expected as the main output material from the methane feedstock, atomic hydrogen would then be expected to etch it awayin situ, such that the net production of thatsp2-hybridized solid material is nearly a zero. Finally, the crucial importance of gas heating was corroborated by replacing RF with microwave source whereby facilesp3production was attained with H2/CH4gas mixture.  more » « less
Award ID(s):
2333452
PAR ID:
10633958
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
IOP Publishing
Date Published:
Journal Name:
Journal of Physics D: Applied Physics
Volume:
57
Issue:
47
ISSN:
0022-3727
Page Range / eLocation ID:
475205
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Energy Technology)
    Dielectric barrier discharge (DBD) plasma is a promising technology for catalysis due to its low‐temperature operation, cost‐effectiveness, and silent operation. This review comprehensively analyzes the design and operational parameters of DBD plasma reactors for three key catalytic applications: CH4conversion, CO2splitting, and dry reforming of methane (DRM). While catalyst selection is crucial for achieving desired product selectivity, reactor design and reaction parameters such as discharge power, electrode gap, reactor length, frequency, dielectric material thickness, and feed gas flow rate, significantly influence discharge characteristics and reaction mechanisms. This review also explores the influence of less prominent factors, such as electrode shape and applied voltage waveforms. Additionally, this review addresses the challenges of DBD plasma catalysis, including heat loss, temperature effects on discharge characteristics, and strategies for enhancing overall efficiency. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Discover Applied Sciences)
    Abstract Deeply fractured rocks of meteorite impact craters are suggested as prime niches for subsurface microbial colonization. Methane can be a product of such microbial communities and seeps of methane from impact craters on Earth are of strong interest as they act as analogs for Mars. Previous studies report signs of ancient microbial methanogenesis in the Devonian Siljan meteorite impact structure in Sweden, but the proportion of microbial methane, metabolic pathways, and potential modern activity remain elusive. In this study, gas composition, hydrochemistry, oil organic geochemistry, and microbial community analyses are reported in 400 m deep fractures of the Siljan impact structure. The results showed a dominantly microbial origin for methane, which was supported by highly negative δ13CCH4and positive δ13CCO2values along with multiply substituted isotopologues (Δ13CH3D) that indicated disequilibrium fractionation due to microbial kinetic isotope effects. The presence of C2to C5hydrocarbons suggested a minor thermogenic input in the gas mix. Characterization of the microbial community via 16S rRNA gene amplicon sequencing and real-time PCR indicated a low abundance of several methanogenic archaeal populations, which is common for settings with active methanogenesis. Evidence of oil biodegradation suggested that secondary microbial hydrocarbon utilization was involved in the methanogenesis. Low sulfate and high alkalinity in the groundwaters also suggested a dominantly microbial methane formation driven by infiltration of freshwater that was coupled to sulfate reduction and secondary utilization of early mature thermogenic hydrocarbons. 
    more » « less
  3. ; ; ; ; ; ; (, Journal of Materials Science: Materials in Electronics)
    The effect of precursor stoichiometry is reported on morphology, phase purity, and texture formation of polycrystalline diamond films. The diamond films were deposited on 100-mm Si (100) substrates using hot filament chemical vapor deposition at substrate temperature 720–750 °C using a mixture of methane and hydrogen. The gas mixture was varied with methane concentrations 1.5% to 4.5%. Diamond film thickness and average grain size both increase with increasing methane concentration. Diamond quality was checked using surface and cross-section by ultraviolet micro-Raman spectroscopy. The data show consistent diamond properties across the surface of the film and along the cross-section. XRD pole figure analyses of the films show that 3.0% methane results in preferential orientation of diamond in the〈111〉direction, whereas films deposited with 4.5% methane showed texture along the〈220〉direction in addition to〈111〉which was tilted ~ 23° with respect to the surface normal. 
    more » « less
  4. ; ; ; ; ; (, AIChE Journal)
    Abstract In this work, we demonstrate plasma‐catalytic synthesis of hydrogen and acrylonitrile (AN) from CH4and N2. The process involves two steps: (1) plasma synthesis of C2H2and HCN in a nominally 1:1 stoichiometric ratio with high yield up to 90% and (2) downstream thermocatalytic reaction of these intermediates to make AN. The effect of process parameters on product distributions and specific energy requirements are reported. If the catalytic conversion of C2H2and HCN in the downstream thermocatalytic step to AN were perfect, which will require further improvements in the thermocatalytic reactor, then at the maximum output of our 1 kW radiofrequency 13.56 MHz transformer, a specific energy requirement of 73 kWh kgAN−1was determined. The expectation is that scaling up the process to higher throughputs would result in decreases in specific energy requirement into the predicted economically viable range less than 10 kWh kgAN−1. 
    more » « less
  5. ; (, Environmental Research Letters)
    Abstract Reservoirs of14C-depleted methane (CH4), a potent greenhouse gas, residing beneath permafrost are vulnerable to escape where permafrost thaw creates open-talik conduits. However, little is known about the magnitude and variability of this methane source or its response to climate change. Remote-sensing detection of large gas seeps would be useful for establishing a baseline understanding of sub-permafrost methane seepage, as well as for monitoring these seeps over time. Here we explored synthetic aperture radar’s (SAR) response to large sub-permafrost gas seeps in an interior Alaskan lake. In SAR scenes from 1992 to 2011, we observed high perennial SAR L-band backscatter (σ0) from a ∼90 m-wide feature in the winter ice of interior Alaska’s North Blair Lake (NBL). Spring and fall optical imagery showed holes in the ice at the same location as the SAR anomaly. Through field work we (1) confirmed gas bubbling at this location from a large pockmark in the lakebed, (2) measured flux at the location of densest bubbles (1713 ± 290 mg CH4m−2d−1), and (3) determined the bubbles’ methane mixing ratio (6.6%), radiocarbon age (18 470 ± 50 years BP), and δ13CCH4values (−44.5 ± 0.1‰), which together may represent a mixture of sources and processes. We performed a first order comparison of SARσ0from the NBL seep and other known sub-permafrost methane seeps with diverse ice/water interface shapes in order to evaluate the variability of SAR signals from a variety of seep types. Results from single-polarized intensity and polarimetric L-band SAR decompositions as well as dual-polarized C-band SAR are presented with the aim to find the optimal SAR imaging parameters to detect large methane seeps in frozen lakes. Our study indicates the potential for SAR remote sensing to be used to detect and monitor large, sub-permafrost gas seeps in Arctic and sub-Arctic lakes. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email