An official website of the United States government
An engineered 3D architectural network of the biopolymeric hydrogel can mimic the native cell environment that promotes cell infiltration and growth. Among several bio-fabricated hydrogel structures, core–shell microcapsules inherit the potential of cell encapsulation to ensure the growth and transport of cells and cell metabolites. Herein, a co-axial electrostatic encapsulation strategy is used to create and encapsulate the cells into chitin nanofibrils integrated alginate hydrogel microcapsules. Three parameters that are critical in the electrostatic encapsulation process, hydrogel composition, flow rate, and voltage were optimized. The physicochemical characterization including structure, size, and stability of the core–shell microcapsules was analyzed by scanning electron microscope (SEM), FTIR, and mechanical tests. The cellular responses of the core–shell microcapsules were evaluated through in vitro cell studies by encapsulating NIH/3T3 fibroblast cells. Notably, the bioactive microcapsule showed that the cell viability was found excellent for more than 2 weeks. Thus, the results of this core–shell microcapsule showed a promising approach to creating 3D hydrogel networks suitable for different biomedical applications such as in vitro tissue models for toxicity studies, wound healing, and tissue repair.
more »
« less
Electrospun Polycaprolactone–Gelatin Fibrils Enabled 3D Hydrogel Microcapsules for Biomedical Applications
Microcapsules provide a microenvironment by improving the protection and delivery of cells and drugs to specific tissue areas, promoting cell integration and tissue regeneration. Effective microcapsules must not only be permeable for micronutrient diffusion but mechanically stable. Alginate hydrogel is one of the commonly used biomaterials for fabricating microcapsules due to its gel-forming ability and low toxicity. However, its mechanical instability, inertness, and excessive porosity have impeded its use. Embedding nanofibrils in the alginate hydrogel microcapsules improves their biological and mechanical properties. In this research, electrospun composite nanofibers of PCL–gelatin (PG) were first fabricated, characterized, and cryoground. The filtered and cryoground powder solution was mixed with the alginate solution and through electrospray, fabricated into microcapsules. Parameters such as flow rate, voltage, and hydrogel composition, which are critical in the electrostatic encapsulation process, were optimized. The microcapsules were further immersed in different solvent environments (DI water, complete media, and PBS), which were observed and compared for their morphology, size distribution, and mechanical stability properties. The average diameters of the PG nanofibers ranged between 0.2 and 2 μm, with an average porosity between 58 and 73%. The average size of the microcapsules varied between 300 and 900 μm, depending on the solvent environment. Overall, results showed an improved alginate 3D hydrogel network suitable for biomedical applications.
more »
« less
- Award ID(s):
- 2100739
- PAR ID:
- 10635716
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Journal of Functional Biomaterials
- Volume:
- 16
- Issue:
- 3
- ISSN:
- 2079-4983
- Page Range / eLocation ID:
- 85
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Effective design of cell-delivery scaffolds is of key importance for regenerative medicine technologies to meet their full potential, especially when considering cell delivery to wounds of complex architecture or directly into the biological environment. Few studies, however, focus on a systematic approach to understanding the cell, polymer scaffold, and final biomaterial properties of this composite material. In this work, we report on the systematic analysis of a supramolecular hydrogel composed of ionically crosslinked peptide amphiphile (PA) nanofibers, optimized for high-shear delivery of therapeutic cells, and compare the performance of this biomaterial to a covalent polymer hydrogel of ionically cross-linked alginate. Using a full factorial design of experiments (DoE), we investigated the interplay between polymer concentration and cell loading to determine the impact on mechanical properties, structural integrity, substrate adhesion, and sprayability of the hydrogel. The shear-thinning and thixotropic nature of the supramolecular hydrogels enabled effective deposition through a spray nozzle, not possible with the alginate hydrogel, while preserving cell viability and hydrogel mechanical properties. The supramolecular backbone of the PA nanofibers enabled remarkable mechanical resilience and full recovery post-spray, even at cell loadings as high as 2 million cells/mL, while significant loss of gel integrity was observed with the alginate hydrogel at equivalent cell loadings. Our findings establish a robust structure−property relationship framework for the formulation of cell-laden supramolecular hydrogels capable of high-shear delivery, highlighting their potential as customizable platforms for regenerative medicine, advanced wound care, and 3D printing applications.more » « less
-
Abstract Alginate hydrogels are widely used as biomaterials for cell culture and tissue engineering due to their biocompatibility and tunable mechanical properties. Reducing alginate molecular weight is an effective strategy for modulating hydrogel viscoelasticity and stress relaxation behavior, which can significantly impact cell spreading and fate. However, current methods like gamma irradiation to produce low molecular weight alginates suffer from high cost and limited accessibility. Here, a facile and cost‐effective approach to reduce alginate molecular weight in a highly controlled manner using serial autoclaving is presented. Increasing the number of autoclave cycles results in proportional reductions in intrinsic viscosity, hydrodynamic radius, and molecular weight of the polymer while maintaining its chemical composition. Hydrogels fabricated from mixtures of the autoclaved alginates exhibit tunable mechanical properties, with inclusion of lower molecular weight alginate leading to softer gels with faster stress relaxation behaviors. The method is demonstrated by establishing how viscoelastic relaxation affects the spreading of encapsulated fibroblasts and glioblastoma cells. Results establish repetitive autoclaving as an easily accessible technique to generate alginates with a range of molecular weights and to control the viscoelastic properties of alginate hydrogels, and demonstrate utility across applications in mechanobiology, tissue engineering, and regenerative medicine.more » « less
-
Babski-Reeves, K; Eksioglu, B; Hampton, D. (Ed.)Extrusion-based three-dimensional (3D) bio-printing is one of the several 3D bioprinting methods that is frequently used in current times. This method enables the accurate deposition of cell-laden bio-ink while ensuring a predetermined scaffold architecture that may allow living tissue regeneration. Natural hydrogels are a strong choice for bio-ink formulation for the extrusion-based 3D bioprinting method because they have a combination of unique properties, which include biocompatibility, reduced cell toxicity, and high-water content. However, due to its low mechanical integrity, hydrogel frequently struggles to retain structural stability. To overcome this challenge, we evaluated the rheological characteristics of distinct hybrid hydrogels composed of carboxymethyl cellulose (CMC), a widely used alginate, and nanofibers generated from cellulose (TEMPO-mediated nano-fibrillated cellulose, TONFC). Therefore, to examine the rheological properties, a set of compositions was developed incorporating CMC (1%–4%), alginate (1%–4%), and higher and lower contents of TONFC (0.5%) and (0.005%) respectively. From the flow diagram, the shear thinning coefficients of n and K were calculated, which were later linked to the 3D printability. With the guidance of diverse nanofiber ratios, it is possible to regulate the rheological properties and create 3D bioprinted scaffolds with well-defined scaffold architecture.more » « less
-
Abstract Microgels have recently received widespread attention for their applications in a wide array of domains such as tissue engineering, regenerative medicine, and cell and tissue transplantation because of their properties like injectability, modularity, porosity, and the ability to be customized in terms of size, form, and mechanical properties. However, it is still challenging to mass (high-throughput) produce microgels with diverse sizes and tunable properties. Herein, we utilized an air-assisted co-axial device (ACAD) for continuous production of microgels in a high-throughput manner. To test its robustness, microgels of multiple hydrogels and their combination, including alginate (Alg), gelatin methacrylate (GelMA) and Alg–GelMA, were formed at a maximum production rate of ∼65 000 microgels s −1 while retaining circularity and a size range of 50–500 µ m based on varying air pressure levels. The ACAD platform allowed single and multiple cell encapsulation with 74 ± 6% efficiency. These microgels illustrated appealing rheological properties such as yield stress, viscosity, and shear modulus for bioprinting applications. Specifically, Alg microgels have the potential to be used as a sacrificial support bath while GelMA microgels have potential for direct extrusion both on their own or when loaded in a bulk GelMA hydrogel. Generated microgels showed high cell viability (>90%) and proliferation of MDA-MB-231 and human dermal fibroblasts over seven days in both encapsulation and scaffolding applications, particularly for GelMA microgels. The developed strategy provides a facile and rapid approach without any complex or expensive consumables and accessories for scalable high-throughput microgel production for cell therapy, tissue regeneration and 3D bioprinting applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.3390/jfb16030085
