An official website of the United States government
Abstract We report a novel approach for realizing tunable/reconfigurable terahertz (THz) mesh filters on the basis of micromachined mesa‐array structures. In this approach, different filter patterns are generated virtually using photogenerated free carriers in a semiconducting mesa‐array structure to achieve superior tunability and reconfigurability. Micromachined mesa‐array structures enable the formation of high fidelity, optically generated mesh filter structures for THz frequencies. To evaluate the proposed filter designs, the optically patterned spatial modulation properties of mesa‐array structures were first evaluated. Reconfigurable mesh filter prototypes were then designed and simulated using silicon mesa arrays with 50 × 50 μm2square mesa unit cells. Simulations show that reconfigurable bandpass filters (BPFs) operating in the frequency range of 108–489 GHz with insertion losses of 0.82–1.13 dB can be achieved. By employing smaller unit cells, the frequency tuning range and filtering performance can be further improved. In addition to BPFs, other filter functionalities can also be realized utilizing the proposed approach. The wide tuning range and reconfigurability of the mesh filters demonstrate that the proposed approach is promising for developing tunable/reconfigurable circuits and components for advanced THz sensing, imaging, and communications.
more »
« less
Photonically driven pseudo-continuous and broadband THz phase shifting using spatially resolved photoconductivity modulation
We report what we believe to be a novel and unique approach for achieving high-performance and broadband THz phase shifting based on spatially-resolved photoconductivity modulation (SRPM). By changing the illumination area on a hybrid Au-Ge mesa-array (AGMA) structure in front of an indium tin oxide (ITO) layer for local photoconductivity modulation, the phase difference between the incident- and reflected-waves can be tuned nearly continuously with extremely low reflection loss. For a prototype demonstration, a photonically-driven THz phase shifting device based on the WR-5.1 (140-220 GHz) waveguide configuration was designed, modeled and simulated. To achieve phase tuning in the range of 0° to -180° at 180 GHz (band center frequency), a mesa-array consisting of 12 × 6 unit cells (each 105 μm × 105 μm) was designed, and a distancedof 250 μm between the AGMA and ITO was used. The SRPM is accomplished using computer-generated light patterns from a closely-coupled micro-LED array for through-ITO illumination, without the need for any biasing circuitry. Full wave simulation results have shown that pseudo-continuous and broadband phase shifting can be achieved in the entire WR-5.1 band, and a shifting range of 0° to -180° at 180 GHz can be realized as designed. In addition, by using light patterns of different combinations of vertical strips, a fine phase tuning step as small as ∼0.05° can be demonstrated. For all phase tuning states, the simulated reflection loss is generally less than 1 dB with low loss variation. The proposed technology for high-performance THz phase modulation is promising and powerful, while offering far more design flexibility and frequency scalability than the current state-of-the-art since it requires no biasing wires thus eliminating parasitic-related performance degradation. Therefore, this technology is suitable for the development of large-scale THz phased-arrays, reconfigurable reflectarrays, and tunable metasurfaces for dynamic beam steering/forming required in next generation (6G or beyond) wireless communications.
more »
« less
- Award ID(s):
- 2223949
- PAR ID:
- 10636483
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 33
- Issue:
- 19
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 40801
- Size(s):
- Article No. 40801
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We report a novel approach for dynamically tuning and reconfiguring microwave bandpass filters (BPFs) based on optically controlled switching elements using photoconductivity modulation in semiconductors. For a prototype demonstration, a BPF circuit featuring a second‐order design using two closely coupled split‐ring resonators embedded with multiple silicon chips (as switching elements) was designed, fabricated, and characterized. The silicon chips were optically linked to fiber‐coupled laser diodes (808 nm light) for switching/modulation, enabling dynamic tuning and reconfiguring of the BPF without any complex biasing circuits. By turning on and off the two laser diodes simultaneously, the BPF response can be dynamically reconfigured between bandpass and broadband suppression. Moreover, the attenuation level of the passband can be continuously adjusted (from 0.7 to 22 dB at the center frequency of 3.03 GHz) by varying the light intensity from 0 to 40 W/cm2. The tuning/reconfiguring 3‐dB bandwidth is estimated to be ~200 kHz. In addition, the potential and limitations of the proposed approach using photoconductivity modulation are discussed. With the strong tuning/reconfiguring capability demonstrated and the great potential for high‐frequency operation, this approach holds promise for the development of more advanced tunable filters and other adaptive circuits for next‐generation sensing, imaging, and communication systems.more » « less
-
Abstract Devices designed to dynamically control the transmission, reflection, and absorption of terahertz (THz) radiation are essential for the development of a broad range of THz technologies. A viable approach utilizes materials which undergo an insulator‐to‐metal transition (IMT), switching from transmissive to reflective upon becoming metallic. However, for many applications, it is undesirable to have spurious reflections that can scatter incident light and induce noise to the system. We present an electrically actuated, broadband THz switch which transitions from a transparent state with low reflectivity, to an absorptive state for which both the reflectivity and transmission are strongly suppressed. Our device consists of a patterned high‐resistivity silicon metamaterial layer that provides broadband reflection suppression by matching the impedance of free space. This is integrated with a VO2ground plane, which undergoes an IMT by means of a DC bias applied to an interdigitated electrode. THz time domain spectroscopy measurements reveal an active bandwidth of 700 GHz with suppressed reflection and more than 90% transmission amplitude modulation with a low insertion loss. We utilize finite‐difference time domain (FDTD) simulations in order to examine the loss mechanisms of the device, as well as the sensitivity to polarization and incident angle. This device validates a general approach toward suppressing unwanted reflections in THz modulators and switches which can be easily adapted to a broad array of applications through straightforward modifications of the structural parameters.more » « less
-
This paper presents the design of a 23.7 to 29.9 GHz wide tuning range VCO (Voltage Controlled Oscillator) designed using a 180 nm CMOS process. In order to achieve a good phase noise performance and get a wide frequency tuning range, cross-coupling and gate biasing techniques are utilized in the proposed cross-coupled LC VCO architecture. The simulated phase noise of −130 dBc/Hz is achieved at a 1 MHz offset. With the supply voltage of 1.8 V, the total power consumption of the VCO is 32.04 mW. The proposed VCO has good performance in terms of low-phase noise and has a wide frequency tuning range, which makes it highly suitable for millimeter wave-based applications.more » « less
-
This paper presents a low phase noise 28 GHz voltage-controlled oscillator (VCO) using a transformer-based active impedance converter to enhance the quality factor (Q) of the capacitor in the resonator. The active impedance converter can enhance the Q of a capacitor bank and varactor by 25-40% across the VCO’s tuning range. The proposed VCO is fabricated using the proposed transformer-based Q-enhancement impedance converter in a standard 65 nm CMOS process. The VCO achieves a 15.9% measured fractional frequency tuning range and phase noise of −107.6 dBc/Hz at 1 MHz offset from 28 GHz oscillation frequency while occupying only 0.05 mm2 area (200 μm × 250 μm). The VCO consumes 5.1 mW power, resulting in an excellent figure-of-merit (FoM) of 189.4 dBc/Hz and a figure-of-merit-with-area (FoMA) of 202.8 dBc/Hz.more » « less
