An official website of the United States government
Abstract CTEA (N,N‐bis[2‐(carboxylmethyl)thioethyl]amine) is a mixed donor ligand that has been incorporated into multiple fluorescent sensors such as NiSensor‐1 that was reported to be selective for Ni2+. Other metal ions such as Zn2+do not produce an emission response in aqueous solution. To investigate the coordination chemistry and selectivity of this receptor, we prepared NiCast, a photocage containing the CTEA receptor. Cast photocages undergo a photoreaction that decreases electron density on a metal‐bound aniline nitrogen atom, which shifts the binding equilibrium toward unbound metal ion. The unique selectivity of CTEA was examined by measuring the binding affinity of NiCast and the CTEA receptor for Ni2+, Zn2+, Cd2+and Cu2+under different conditions. In aqueous solution, Ni2+binds more strongly to the aniline nitrogen atom than Cd2+; however, in CH3CN, the change in affinity virtually disappears. The crystal structure of [Cu(CTEA)], which exhibits a Jahn–Teller–distorted square pyramidal structure, was also analyzed to gain more insight into the underlying coordination chemistry. These studies suggest that the fluorescence selectivity of NiSensor‐1 in aqueous solution is due to a stronger interaction between the aniline nitrogen atom and Ni2+compared to other divalent metal ions except Cu2+.
more »
« less
This content will become publicly available on October 1, 2026
Chelating 5′-(p-hydroxyphenyl)pyridylthiazoles as ratiometric fluorescence probes for d10 metal ions
Three fluorescent 5’-(p-hydroxyphenyl)pyridylthiazoles (HPPT) with different chelating groups at the 4’ position were synthesized and evaluated for their ability to detect transition metal ions in acetonitrile and aqueous buffers, based on changes in fluorescence intensity and intramolecular charge transfer (ICT). Both 4’-O-picolyloxy-HPPT (Pic-HPPT) and 4’-O-(o-carboxypicolyl)-HPPT (CPic-HPPT) respond strongly to Zn(II), Cd(II), and Pb(II) in CH3CN with a bathochromic shift in emission up to 68 nm, whereas 4’-O-carboxymethyl-HPPT (CM-HPPT) is unresponsive. Only CPic-HPPT responds to d10 metal ions in aqueous phosphate buffered solution (PBS, pH 7.4), attributable to the added chelating power of the ortho-carboxylate. CPic-HPPT forms a 2:1 complex with Zn(II) and a 1:1 complex with Cd(II) and Pb(II) in CH3CN, whereas a 1:1 complex forms with Zn(II), Cd(II), and Hg(II) ions in PBS. X-ray structural analysis of 1:1 Pic-HPPT–metal ion complexes reveals a planar tridentate binding motif with Zn(II) but a nonplanar tridentate geometry with the larger Cd(II) ion. Fluorescence titration of CPic-HPPT in PBS with Zn(NO3)2 established sub-micromolar sensitivity with a limit of quantitation at 50 nM. These results show that CPic-HPPT has promise as a fluorescent probe for d10 metal ions in physiologically relevant media.
more »
« less
- Award ID(s):
- 2204206
- PAR ID:
- 10638050
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Tetrahedron Letters
- Volume:
- 169
- Issue:
- C
- ISSN:
- 0040-4039
- Page Range / eLocation ID:
- 155743
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)A highly porous adsorbent based on a metal–organic framework was successfully designed and applied as an innovative adsorbent in the solid phase for the heavy metal removal. MIL-125 was densely decorated by 2-imino-4-thiobiuret functional groups, which generated a green, rapid, and efficacious adsorbent for the uptake of Hg( ii ) and Pb( ii ) from aqueous solutions. ITB-MIL-125 showed a high adsorption affinity toward mercury( ii ) ions of 946.0 mg g −1 due to covalent bond formation with accessible sulfur-based functionality. Different factors were studied, such as the initial concentration, pH, contact time, and competitive ions, under same circumstances at the room temperature. Moreover, the experimental adsorption data were in excellent agreement with the Langmuir adsorption isotherm and pseudo-second order kinetics. At a high concentration of 100 ppm mixture of six metals, ITB-MIL-125 exhibited a high adsorption capacity, reaching more than 82% of Hg( ii ) compared to 62%, 30%, 2%, 1.9%, and 1.6% for Pb( ii ), Cu( ii ), Cd( ii ), Ni( ii ), and Zn( ii ), respectively.more » « less
-
null (Ed.)Heavy metal ions are highly toxic and widely spread as environmental pollutants. This work reports the development of two novel chelating adsorbents, based on the chemical modifications of graphene oxide and zirconium phosphate by functionalization with melamine-based chelating ligands for the effective and selective extraction of Hg( ii ) and Pb( ii ) from contaminated water sources. The first adsorbent melamine, thiourea-partially reduced graphene oxide (MT-PRGO) combines the heavier donor atom sulfur with the amine and triazine nitrogen's functional groups attached to the partially reduced GO nanosheets to effectively capture Hg( ii ) ions from water. The MT-PRGO adsorbent shows high efficiency for the extraction of Hg( ii ) with a capacity of 651 mg g −1 and very fast kinetics resulting in a 100% removal of Hg( ii ) from 500 ppb and 50 ppm concentrations in 15 second and 30 min, respectively. The second adsorbent, melamine zirconium phosphate (M-ZrP), is designed to combine the amine and triazine nitrogen's functional groups of melamine with the hydroxyl active sites of zirconium phosphate to effectively capture Pb( ii ) ions from water. The M-ZrP adsorbent shows exceptionally high adsorption affinity for Pb( ii ) with a capacity of 681 mg g −1 and 1000 mg g −1 using an adsorbent dose of 1 g L −1 and 2 g L −1 , respectively. The high adsorption capacity is also coupled with fast kinetics where the equilibrium time required for the 100% removal of Pb( ii ) from 1 ppm, 100 ppm and 1000 ppm concentrations is 40 seconds, 5 min and 30 min, respectively using an adsorbent dose of 1 g L −1 . In a mixture of six heavy metal ions at a concentration of 10 ppm, the removal efficiency is 100% for Pb( ii ), 99% for Hg( ii ), Cd( ii ) and Zn( ii ), 94% for Cu( ii ), and 90% for Ni( ii ) while at a higher concentration of 250 ppm the removal efficiency for Pb( ii ) is 95% compared to 23% for Hg( ii ) and less than 10% for the other ions. Because of the fast adsorption kinetics, high removal capacity, excellent regeneration, stability and reusability, the MT-PRGO and M-ZrP are proposed as top performing remediation adsorbents for the solid phase extraction of Hg( ii ) and Pb( ii ), respectively from contaminated water.more » « less
-
Transmembrane P 1B -type ATPase pumps catalyze the extrusion of transition metal ions across cellular lipid membranes to maintain essential cellular metal homeostasis and detoxify toxic metals. Zn( ii )-pumps of the P 1B-2 -type subclass, in addition to Zn 2+ , select diverse metals (Pb 2+ , Cd 2+ and Hg 2+ ) at their transmembrane binding site and feature promiscuous metal-dependent ATP hydrolysis in the presence of these metals. Yet, a comprehensive understanding of the transport of these metals, their relative translocation rates, and transport mechanism remain elusive. We developed a platform for the characterization of primary-active Zn( ii )-pumps in proteoliposomes to study metal selectivity, translocation events and transport mechanism in real-time, employing a “multi-probe” approach with fluorescent sensors responsive to diverse stimuli (metals, pH and membrane potential). Together with atomic-resolution investigation of cargo selection by X-ray absorption spectroscopy (XAS), we demonstrate that Zn( ii )-pumps are electrogenic uniporters that preserve the transport mechanism with 1 st -, 2 nd - and 3 rd -row transition metal substrates. Promiscuous coordination plasticity, guarantees diverse, yet defined, cargo selectivity coupled to their translocation.more » « less
-
In a simple, one-step reaction, we have synthesized a pyridoxal-based chemosensor by reacting tris(hydroxymethyl)aminomethane (TRIS) together with pyridoxal hydrochloride to yield a Schiff-base ligand that is highly selective for the detection of Zn( ii ) ion. Both the ligand and the Zn( ii ) complex have been characterized by 1 H & 13 C NMR, ESI-MS, CHN analyses, and X-ray crystallography. The optical properties of the synthesized ligand were investigated in an aqueous buffer solution and found to be highly selective and sensitive toward Zn( ii ) ion through a fluorescence turn-on response. The competition studies reveal the response for zinc ion is unaffected by all alkali and alkaline earth metals; and suppressed by Cu( ii ) ion. The ligand itself shows a weak fluorescence intensity (quantum yield, Φ = 0.04), and the addition of zinc ion enhanced the fluorescence intensity 12-fold (quantum yield, Φ = 0.48). The detection limit for zinc ion was 2.77 × 10 −8 M, which is significantly lower than the WHO's guideline (76.5 μM). Addition of EDTA to a solution containing the ligand–Zn( ii ) complex quenched the fluorescence, indicating the reversibility of Zn( ii ) binding. Stoichiometric studies indicated the formation of a 2 : 1 L 2 Zn complex with a binding constant of 1.2 × 10 9 M −2 (±25%). The crystal structure of the zinc complex shows the same hydrated L 2 Zn complex, with Zn( ii ) ion binding with an octahedral coordination geometry. We also synthesized the copper( ii ) complex of the ligand, and the crystal structure showed the formation of a 1 : 1 adduct, revealing 1-dimensional polymeric networks with octahedral coordinated Cu( ii ). The ligand was employed as a sensor to detect zinc ion in HEK293 cell lines derived from human embryonic kidney cells grown in tissue culture which showed strong luminescence in the presence of Zn( ii ). We believe that the outstanding turn-on response, sensitivity, selectivity, lower detection limit, and reversibility toward zinc ion will find further application in chemical and biological science.more » « less
