An official website of the United States government
Abstract Surface segregation, whereby the surface composition of an alloy differs systematically from the bulk, has historically been hard to study, because it requires experimental and modeling methods that span alloy composition space. In this work, we study surface segregation in catalytically relevant noble and platinum‐group metal alloys with a focus on three ternary systems: AgAuCu, AuCuPd, and CuPdPt. We develop a data set of 2478 fcc slabs with those compositions including all three low‐index crystallographic orientations relaxed with Density Functional Theory using the PBEsol functional with D3 dispersion corrections. We fine‐tune a machine learning model on this data and use the model in a series of 1800 Monte Carlo simulations spanning ternary composition space for each surface orientation and ternary chemical system. The results of these simulations are validated against prior experimental surface segregation data collected using composition spread alloy films for AgAuCu and AuCuPd. Our findings reveal that simulations conducted using the (110) orientation most closely match experimentally observed surface segregation trends, and while predicted trends qualitatively match observation, biases in the PBEsol functional limit numeric accuracy. This study advances understanding of surface segregation and the utility of computational studies and highlights the need for further improvements in simulation accuracy.
more »
« less
This content will become publicly available on February 12, 2026
Accelerating active learning materials discovery with FAIR data and workflows: A case study for alloy melting temperatures
Active learning (AL) is a powerful sequential optimization approach that has shown great promise in the discovery of new materials. However, a major challenge remains the acquisition of the initial data and the development of workflows to generate new data at each iteration. In this study, we demonstrate a significant speedup in an optimization task by reusing a published simulation workflow available for online simulations and its associated data repository, where the results of each workflow run are automatically stored. Both the workflow and its data follow FAIR (findable, accessible, interoperable, and reusable) principles using nanoHUB’s infrastructure. The workflow employs molecular dynamics to calculate the melting temperature of multi-principal component alloys. We leveraged all prior data not only to develop an accurate machine learning model to start the sequential optimization but also to optimize the simulation parameters and accelerate convergence. Prior work showed that finding the alloy composition with the highest melting temperature required testing several alloy compositions, and establishing the melting temperature for each composition took, on average, multiple simulations. By developing a workflow that utilizes the FAIR data in the nanoHUB database, we reduced the number of simulations per composition to one and found the alloy with the lowest melting temperature testing only three compositions. This second optimization, therefore, shows a speedup of 10x as compared to models that do not access the FAIR databases
more »
« less
- Award ID(s):
- 2226416
- PAR ID:
- 10639653
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Computational materials science
- ISSN:
- 1879-0801
- Subject(s) / Keyword(s):
- 10.1016/j.commatsci.2024.113640
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
High-throughput screening (HTS) can significantly accelerate the design of new materials, allowing for automatic testing of a large number of material compositions and process parameters. Using HTS in Integrated Computational Materials Engineering (ICME), the computational evaluation of multiple combinations can be performed before empirical testing, thus reducing the use of material and resources. Conducting computational HTS involves the application of high-throughput computing (HTC) and developing suitable tools to handle such calculations. Among multiple ICME methods compatible with HTS and HTC, the calculation of phase diagrams known as the CALPHAD method has gained prominence. When combining thermodynamic modeling with kinetic simulations, predicting the entire history of precipitation behavior is possible. However, most reported CALPHAD-based HTS frameworks are restricted to thermodynamic modeling or not accessible. The present work introduces CAROUSEL—an open-sourCe frAmewoRk fOr high-throUghput microStructurE simuLations. It is designed to explore various alloy compositions, processing parameters, and CALPHAD implementations. CAROUSEL offers a graphical interface for easy interaction, scripting workflow for advanced simulations, the calculation distribution system, and simulation data management. Additionally, CAROUSEL incorporates visual tools for exploring the generated data and integrates through-process modeling, accounting for the interplay between solidification and solid-state precipitation. The application area is various metal manufacturing processes where the precipitation behavior is crucial. The results of simulations can be used in upscale material models, thus covering different microstructural phenomena. The present work demonstrates how CAROUSEL can be used for additive manufacturing (AM), particularly for investigating different chemical compositions and heat treatment parameters (e.g., temperature, durationmore » « less
-
Multicomponent refractory alloys have the potential to operate in high-temperature environments. Alloys with heterogeneous/composite microstructure exhibit an optimal combination of high strength and ductility. The present work generates designed compositions using high-throughput computational and machine-learning (ML) models based on elements Mo-Nb-Ti-V-W-Zr manufactured utilizing vacuum arc melting. The experimentally observed phases were consistent with CALPHAD and Scheil simulations. ML models were used to predict the room temperature mechanical properties of the alloy and were validated with experimental mechanical data obtained from the three-point bending and compression tests. This work collectively showcases a data-driven, inverse design methodology that can effectively identify new promising multicomponent refractory alloys.more » « less
-
The global metal market, expected to exceed $18.5 trillion by 2030, faces costly inefficiencies from defects in alloy manufacturing. Although microstructure analysis has improved alloy performance, current numerical models struggle to accurately simulate solidification. In this research, we thus introduce AlloyGAN - the first domain-driven Conditional Generative Adversarial Network (cGAN) involving domain prior for generating alloy microstructures of previously not considered chemical and manufactural compositions. AlloyGAN improves cGAN process by involving prior factors from solidification reaction to generate scientifically valid images of alloy microstructure given basic alloy manufacturing compositions. It achieves a faster and equally accurate alternative to traditional material science methods for assessing alloy microstructures. We contribute (1) a novel Alloy-GAN design for rapid alloy optimization; (2) unique methods that inject prior knowledge of the chemical reaction into cGAN-based models; and (3) metrics from machine learning and chemistry for generation evaluation. Our approach highlights the promise of GAN-based models in the scientific discovery of materials. AlloyGAN has successfully transitioned into an AIGC startup with a core focus on model-generated metallography. We open its interactive demo at: https://deepalloy.com/more » « less
-
Abstract. We present new models for the activity of iron (γFe) in solid face-centered cubic (fcc) and liquid FePt alloy at high temperature and pressure to facilitate their use as sliding buffer redox sensors under extreme conditions. Numerous experimental studies of γFe in FePt alloy at 100 kPa have produced a wide spread of values. By favoring high-temperature studies that are more likely to have produced equilibrium measurement and excluding experiments for compositions and temperatures that probably encountered ordered or unmixed low-temperature phases, we regress an asymmetric Margules activity–composition model with parameters WFePtfcc=-121.5±2.1 kJ mol−1 and WPtFefcc=-93.3±4.3 kJ mol−1. These values are close to the widely used model of Kessel et al. (2001), but for Pt-rich compositions they predict larger Fe activities and correspondingly more reduced oxygen fugacities. Activity–composition relations in liquid FePt are calibrated from direct measurements of activities and, most sensitively, from the trace of the Fe–Pt liquidus. Together, these yield asymmetric Margules parameters of WFePtliq=-124.5 kJ mol−1 and WPtFeliq=-94.0 kJ mol−1. The effects of pressure on both fcc and liquid FePt alloy are considered from excess-volume relations. Both solid and liquid alloy display significant positive excess volumes of mixing. Extraction of the excess volume of mixing for fcc FePt alloy requires filtering data for ordered low-temperature phases and corrections for the effects of magnetostriction on Fe-rich compositions which exhibit “Invar” behavior. Applied at high temperatures and pressures, both solid and liquid FePt alloys have strongly negative deviations from ideality at low pressure, which become closer to ideal at high pressure. These models provide a provisional basis for the calculation of aFe in high-temperature, high-pressure experiments that, when combined with estimates of aFeO, allow characterization of fO2 under conditions relevant to magma oceans, core formation, and differentiation processes in the lower mantle of Earth or on other terrestrial planets. Improvements in these models require new constraints on the equation of state of FePt fcc alloy and documentation of the high-pressure melting relations in the system Fe–Pt.more » « less
