skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Engineering Inorganic Perovskite Films by X Values of DMAPbI x toward Large Area Photovoltaic Devices by Slot‐Die Coating
Title: Engineering Inorganic Perovskite Films by X Values of DMAPbI x toward Large Area Photovoltaic Devices by Slot‐Die Coating
Abstract Dimethylammonium lead iodide (DMAPbIx) has the potential to address the phase stability issue of inorganic perovskite solar cells (PSCs). In this study, the crystallinity, phase structure, defect states, and crystal growth habits of DMAPbIxare controlled by adjusting thexvalue during synthesis, where N,N‐dimethylacetamide (DMAC) is used as the solvent to regulate perovskite film growth. Furthermore, large‐area CsPbI2.85Br0.15perovskite films with preferred oriented growth are achieved using the optimizedxvalue in DMAPbIxthrough the slot‐die coating method. The inorganic PSCs, with a n‐i‐p structure and the active area of 0.04 cm2, achieve a champion power conversion efficiency (PCE) of 19.82%, with an open‐circuit voltage (Voc) of 1.16 V based on perovskite films formed by slot‐die coating. This work provides important insights into the DMAPbIx‐based method for fabricating high‐quality inorganic perovskite films, and paves the way for large‐area inorganic PSCs fabrication for practical applications.  more » « less
Award ID(s):
2305112 2242467 2326788 2423854
PAR ID:
10640855
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley -VCH
Date Published:
Journal Name:
Small
Volume:
21
Issue:
33
ISSN:
1613-6810
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract The performance of large‐area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI3), using a blade coater, slot‐die coater, solution shearing, ink‐jet printing, and thermal evaporation. However, the fabrication of large‐area all‐inorganic perovskite films is not well developed. This study develops, for the first time, an eco‐friendly solvent engineered all‐inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2‐methoxyethanol (2‐ME), or a mixture of ACN and 2‐ME to fabricate large‐area CsPbI2.77Br0.23films with slot‐die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. The optimized slot‐die‐coated CsPbI2.77Br0.23perovskite film, which is prepared from the eco‐friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices. 
    more » « less
  2. ; ; (, Journal of the American Ceramic Society)
    Abstract This study employs a data‐driven machine learning approach to investigate specific ferroelectric properties of Al1−xScxN thin films, targeting their application in next‐generation nonvolatile memory (NVM) devices. This approach analyzes a vast design space, encompassing over a million data points, to predict a wide range of coercive field values that are crucial for optimizing Al1−xScxN‐based NVM devices. We evaluated seven machine learning models to predict the coercive field across a range of conditions, identifying the random forest algorithm as the most accurate, with a testR2value of 0.88. The model utilized five key features: film thickness, measurement frequency, operating temperature, scandium concentration, and growth temperature to predict the design space. Our analysis spans 13 distinct scandium concentrations and 13 growth temperatures, encompassing thicknesses from 9–1000 nm, frequencies from 1 to 100 kHz, and operating temperatures from 273 to 700 K. The predictions revealed dominant coercive field values between 3.0 and 4.5 MV/cm, offering valuable insights for the precise engineering of Al1−xScxN‐based NVM devices. This work underscores the potential of machine learning in guiding the development of advanced ferroelectric materials with tailored properties for enhanced device performance. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract The optimal selection of alkyl chains and halogen ions in ammonium salts for addressing specific defect types in perovskite films remains unclear, although ammonium salts emerged as a promising strategy to enhance the performance of perovskite solar cells (PSCs). Herein, four ammonium salts are introduced with different alkyl chain types and halogen ions to passivate perovskite films. Branched‐alkyl chain ammonium salts exhibited superior passivation effects compared to linear‐alkyl chain salts, with the alkyl chain structure having a more significant impact on device performance than the halogen ion component. In addition, DFT calculations are performed to investigate which defect types in perovskite films are most effectively passivated by different alkyl chain types and halogen ions in ammonium salts. Branched‐alkyl chain ammonium salts demonstrated superior passivation effects on VPband VFAdefects in perovskite films compared to linear‐alkyl chain salts, while exhibiting similar passivation effects for VIdefects. PSCs passivated with tert‐OAI achieved an impressive efficiency of 25.49%, with a Vocof 1.19 V, a Jscof 25.40 mA cm−2, and an FF of 84.34%. This work highlights a targeted ammonium salt passivation strategy tailored to address different defect types in perovskite films, accounting for variations in perovskite composition and fabrication environments. 
    more » « less
  4. ; ; ; ; ; (, physica status solidi (RRL) – Rapid Research Letters)
    Growths of monoclinic (AlxGa1−x)2O3thin films up to 99% Al contents are demonstrated via metalorganic chemical vapor deposition (MOCVD) using trimethylgallium (TMGa) as the Ga precursor. The utilization of TMGa, rather than triethylgallium, enables a significant improvement of the growth rates (>2.5 μm h−1) of β‐(AlxGa1−x)2O3thin films on (010), (100), and (01) β‐Ga2O3substrates. By systematically tuning the precursor molar flow rates, growth of coherently strained phase pure β‐(AlxGa1−x)2O3films is demonstrated by comprehensive material characterizations via high‐resolution X‐ray diffraction (XRD) and atomic‐resolution scanning transmission electron microscopy (STEM) imaging. Monoclinic (AlxGa1−x)2O3films with Al contents up to 99, 29, and 16% are achieved on (100), (010), and (01) β‐Ga2O3substrates, respectively. Beyond 29% of Al incorporation, the (010) (AlxGa1−x)2O3films exhibit β‐ to γ‐phase segregation. β‐(AlxGa1−x)2O3films grown on (01) β‐Ga2O3show local segregation of Al along (100) plane. Record‐high Al incorporations up to 99% in monoclinic (AlxGa1−x)2O3grown on (100) Ga2O3are confirmed from XRD, STEM, electron nanodiffraction, and X‐ray photoelectron spectroscopy measurements. These results indicate great promises of MOCVD development of β‐(AlxGa1−x)2O3films and heterostructures with high Al content and growth rates using TMGa for next‐generation high‐power and high‐frequency electronic devices. 
    more » « less
  5. ; (, Energies)
    Perovskite photovoltaic technology carries immense opportunity for the solar industries because of its remarkable efficiency and prospect for cost-effective production. However, the successful deployment of perovskite solar modules (PSMs) in the solar market necessitates tackling stability-based obstacles, scalability, and environmental considerations. This paper unveils a comprehensive examination of the cutting-edge advancements in the manufacturing of perovskite solar cells (PSCs) and modules, with an emphasis on high-speed, large-area printing. The paper underscores the substantial progress achieved in printed PSCs and PSMs, demonstrating promising electrical performance and long-term device durability. This review paper categorizes printing techniques compatible with large-area high-speed manufacturing into three distinct families: blade coating, slot die coating, and screen printing, as these common printing practices offer precise control, scalability, cost-effectiveness, high resolution, and efficient material usage. Additionally, this paper presents an in-depth investigation and comparison of superior PSCs and PSMs fabricated by printing on power conversion efficiency (PCE), stability, and scalability. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email