skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Advancements in Manufacturing of High-Performance Perovskite Solar Cells and Modules Using Printing Technologies
Perovskite photovoltaic technology carries immense opportunity for the solar industries because of its remarkable efficiency and prospect for cost-effective production. However, the successful deployment of perovskite solar modules (PSMs) in the solar market necessitates tackling stability-based obstacles, scalability, and environmental considerations. This paper unveils a comprehensive examination of the cutting-edge advancements in the manufacturing of perovskite solar cells (PSCs) and modules, with an emphasis on high-speed, large-area printing. The paper underscores the substantial progress achieved in printed PSCs and PSMs, demonstrating promising electrical performance and long-term device durability. This review paper categorizes printing techniques compatible with large-area high-speed manufacturing into three distinct families: blade coating, slot die coating, and screen printing, as these common printing practices offer precise control, scalability, cost-effectiveness, high resolution, and efficient material usage. Additionally, this paper presents an in-depth investigation and comparison of superior PSCs and PSMs fabricated by printing on power conversion efficiency (PCE), stability, and scalability.  more » « less
Award ID(s):
2053954
PAR ID:
10595686
Author(s) / Creator(s):
;
Publisher / Repository:
Energies
Date Published:
Journal Name:
Energies
Volume:
17
Issue:
24
ISSN:
1996-1073
Page Range / eLocation ID:
6344
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Advanced Energy and Sustainability Research)
    Recent manufacturing of perovskite solar cells (PSC) is moving beyond a spin coating technique. Among several new methods of the large‐area PSCs, inkjet printing (IJP) has emerged as a promising alternative to spin coating due to the high degree of control on printed film area and low material waste. In the IJP of PSCs, one important question is how to remove redundant excess solvent and facilitate the crystallization of the perovskite phase. Along with IJP, an antisolvent bathing is employed. This work reports how the IJP parameters and antisolvent bathing compositions affect the microstructure and initial efficiency of inkjet‐printed PSCs. The halide perovskite films are submerged in the antisolvent of different temperatures to observe the formation of an intermediate phase and the evolution of perovskite phase. By observing the phase evolution using X‐Ray diffraction, an optimized antisolvent bath duration is achieved for diethyl ether (DE) condition. An enhanced power conversion efficiency (PCE) and larger grain size with two sequential passes of inkjet‐deposited perovskite are also reported, and the dissolution of homogeneous nucleation sites as a mechanism for larger grains is proposed. Finally, with multipass IJP and cold antisolvent DE bathing, a champion device with 15.02% PCE is achieved. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Small)
    Abstract Dimethylammonium lead iodide (DMAPbIx) has the potential to address the phase stability issue of inorganic perovskite solar cells (PSCs). In this study, the crystallinity, phase structure, defect states, and crystal growth habits of DMAPbIxare controlled by adjusting thexvalue during synthesis, where N,N‐dimethylacetamide (DMAC) is used as the solvent to regulate perovskite film growth. Furthermore, large‐area CsPbI2.85Br0.15perovskite films with preferred oriented growth are achieved using the optimizedxvalue in DMAPbIxthrough the slot‐die coating method. The inorganic PSCs, with a n‐i‐p structure and the active area of 0.04 cm2, achieve a champion power conversion efficiency (PCE) of 19.82%, with an open‐circuit voltage (Voc) of 1.16 V based on perovskite films formed by slot‐die coating. This work provides important insights into the DMAPbIx‐based method for fabricating high‐quality inorganic perovskite films, and paves the way for large‐area inorganic PSCs fabrication for practical applications. 
    more » « less
  3. ; ; ; ; (, Energy Technology)
    Rapid chemistry and processing development has increased the performance of perovskite solar cells (PSCs) in an unprecedented manner, yet postdeposition annealing impedes high‐throughput manufacturing. Herein, SnO2and carbon charge transport films are fabricated entirely through an integrated robotic setup utilizing inkjet printing and intense pulse light (IPL) as a high‐speed postprocess annealing method; hence, process optimization is crucial for successful fabrication of PSCs. This work investigates the role of inkjet deposition parameters as well as IPL annealing on the morphology and uniformity of films with aid of spectroscopy and spectrophotometry. Initially PSCs exceeding 13% efficiency are developed by only fabricating the SnO2film through the robotic setup, but spin coating all other films followed by IPL annealing to demonstrate successful fabrication of SnO2layer. Finally, SnO2and carbon back contact films are entirely fabricated through the integrated robotic setup in a high humid ambient environment (>60%), resulting in PSCs exceeding 5% efficiency. Unlike successful direct annealing of SnO2wet films, IPL annealing of wet carbon severely damaged the phase and morphology necessitating rapid solvent removal before IPL annealing. This work establishes pioneering steps towards utilizing IPL in an entirely automated fabrication line, allowing for scalable fabrication of PSCs through non‐roll‐to‐roll. 
    more » « less
  4. ; (, 15th International Manufacturing Science and Engineering Conference)
    Rapid advancements within photovoltaics realm necessitates swift fabrication of the modules using cheap materials through cost effective manufacturing processes to achieve short cost payback time. Photovoltaics manufacturing includes chemical processing of the materials followed by thermal annealing. Yet, long-term annealing of the materials using high temperature furnaces have remained the prevalent post-processing approach in industry which necessitates alternative methods to achieve high performance modules through rapid and economical processes. Intense pulse light (IPL) has been successfully applied as a promising rapid post-process annealing for various thin film photovoltaics, particularly to process the organic-inorganic perovskite solar cell (PSC) layers. In this paper, several results pertinent to the application of IPL on perovskite and SnO2 electron transport thin films are presented and the role of IPL on rapid thermal annealing (RTA) is explained. We show that swift fabrication of PSCs through IPL can result in efficiencies exceeding 16% when the Perovskite film is annealed with aid of CH2I2 alkyl halide additive in the ambient with 60% relative humidity. In addition, the synergy of IPL-alkyl halide interaction for other perovskite chemistries is introduced. We show that achieving to PSCs exceeding 12% efficiency was possible when the perovskite and SnO2 ETL was annealed sequentially through IPL. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Materials Horizons)
    Efficient charge collection is critical in large area (quasi-) planar configuration perovskite solar cells (PSCs) as the cell operation relies on the diffusion of photo-generated charge carriers to charge collector layers. Many defects/traps in the polycrystalline perovskite absorber layer strongly affect the charge collection efficiency because the 2D-like top charge collection layer barely penetrates into the 3D grain boundaries in the perovskite layer to efficiently collect the charge carrier. Inspired by blood capillaries for efficient mass exchange, a charge-collection nano-network for efficient charge collection was incorporated into the perovskite absorber using low-cost, stable amino-functionalized graphene (G-NH 2 ). The integration of such an unprecedented structure enables very efficient charge collection, leading to the significant enhancement of the power conversion efficiency of 1 × 1 cm 2 MAPbI 3 PSCs from 14.4 to 18.7% with higher reproducibility, smaller hysteresis and enhanced stability. The physicochemical mechanisms underlying the role of this nano charge-collection nano-network in boosting the charge collection in PSCs are elucidated comprehensively, using a combined experimental and theoretical approach, pointing to a new direction towards up-scaling of high-efficiency PSCs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email