An official website of the United States government
Abstract Spin waves, collective dynamic magnetic excitations, offer crucial insights into magnetic material properties. Rare‐earth iron garnets offer an ideal spin‐wave (SW) platform with long propagation length, short wavelength, gigahertz frequency, and applicability to magnon spintronic platforms. Of particular interest, thulium iron garnet (TmIG) has attracted huge interest recently due to its successful growth down to a few nanometers, observed topological Hall effect, and spin‐orbit torque‐induced switching effects. However, there is no direct spatial measurement of its SW properties. This work uses diamond nitrogen‐vacancy (NV) magnetometry in combination with SW electrical transmission spectroscopy to study SW transport properties in TmIG thin films. NV magnetometry allows probing spin waves at the sub‐micrometer scale, seen by the amplification of the local microwave magnetic field due to the coupling of NV spin qubits with the stray magnetic field produced by the microwave‐excited spin waves. By monitoring the NV spin resonances, the SW properties in TmIG thin films are measured as a function of the applied magnetic field, including their amplitude, decay length (≈50 µm), and wavelength (0.8–2 µm). These results pave the way for studying spin qubit‐magnon interactions in rare‐earth magnetic insulators, relevant to quantum magnonics applications.
more »
« less
Mechanical and Electrical Properties of Free‐standing Polycrystal Diamond Membranes
Abstract In this study, we demonstrate a novel approach for synthesizing free‐standing and transferable polycrystalline diamond membranes (PCDm) to overcome these constraints, thus enabling a much wider spectrum of applications. Two types of PCDm cantilevers —Top‐Surface‐Up (TSU) and Bottom‐Surface‐Up (BSU) are fabricated, each with two different sets of dimensions: 150 µm (width) × 1200 µm (length) and 300 µm (width) × 2000 µm (length). Their mechanical and electrical properties are systematically investigated. Atomic Force Microscopy (AFM) analysis revealed that TSU‐PCDm has a higher elastic modulus than BSU‐PCDm, attributed to differences in grain size and defect distribution. Despite these differences, all PCDms in our work exhibit consistently high modulus values with minimal mechanical degradation across various cantilever geometries. Bandgap measurements using X‐ray Photoelectron Spectroscopy (XPS) and UV–vis absorption spectroscopy indicated a lower bandgap for TSU‐PCDm due to boron incorporation, while BSU‐PCDm exhibited a higher bandgap due to increased hydrogen content. Electrical characterization showed that the sheet resistance of TSU‐PCDm decreases under strain, whereas BSU‐PCDm maintains stable resistance. These findings unveil the material properties of PCDm and their potential usage for myriad diamond‐based electronic applications.
more »
« less
- Award ID(s):
- 2231026
- PAR ID:
- 10641332
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Science
- Volume:
- 12
- Issue:
- 32
- ISSN:
- 2198-3844
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Rare‐earth iron garnets have distinctive spin‐wave (SW) properties such as low magnetic damping and long SW coherence length making them ideal candidates for magnonics. Among them, thulium iron garnet (TmIG) is a ferrimagnetic insulator with unique magnetic properties including perpendicular magnetic anisotropy (PMA) and topological hall effect at room temperature when grown down to a few nanometers, extending its application to magnon spintronics. Here, the SW propagation properties of TmIG films (thickness of 7–34 nm) grown on GGG and sGGG substrates are studied at room temperature. Magnetic measurements show in‐plane magnetic anisotropy for TmIG films grown on GGG and out‐of‐plane magnetic anisotropy for films grown on sGGG substrates with PMA. SW electrical transmission spectroscopy measurements on TmIG/GGG films unveil magnetostatic surface spin waves (MSSWs) propagating up to 80 µm with a SW group velocity of 2–8 km s−1. Intriguingly, these MSSWs exhibit nonreciprocal propagation, opening new applications in SW functional devices. TmIG films grown on sGGG substrates exhibit forward volume spin waves with a reciprocal propagation behavior up to 32 µm.more » « less
-
Abstract A free‐standing β‐Ga2O3, also called β‐Ga2O3nanomembrane (NM), is an important next‐generation wide bandgap semiconductor that can be used for myriad high‐performance future flexible electronics. However, details of structure‐property relationships of β‐Ga2O3NM under strain conditions have not yet investigated. In this paper, the electrical properties of β‐Ga2O3NM under different uniaxial strain conditions using various surface analysis methods are systematically investigated and layer‐delamination and fractures are revealed. The electrical characterization shows that the presence of nanometer‐sized gaps between fractured pieces in β‐Ga2O3NM causes a severe property degradation due to higher resistance and uneven charge distribution in β‐Ga2O3NM which is also confirmed by the multiphysics simulation. Interestingly, the degraded performance in β‐Ga2O3NM is substantially recovered by introducing excessive OH‐bonds in fractured β‐Ga2O3NM via the water vapor treatment. The X‐ray photoelectron spectroscopy study reveals that a formation of OH‐bonds by the water vapor treatment chemically connects nano‐gaps. Thus, the treated β‐Ga2O3samples exhibit reliable and stable recovered electrical properties up to ≈90% of their initial values. Therefore, this result offers a viable route for utilizing β‐Ga2O3NMs as a next‐generation material for a myriad of high‐performance flexible electronics and optoelectronic applications.more » « less
-
Wide-bandgap semiconductors have unique electron emission properties by virtue of having high-lying conduction bands. Among these, diamond stands out because of its chemical stability, allowing it to serve as a solid-state electron source in vacuum and non-vacuum environments, including water. However, the underlying mechanisms of electron emission are not well understood. Here, we report investigations of the mechanisms of electron emission from H-terminated and oxidized surfaces of single-crystal boron-doped diamond(111) in vacuum and in water using both sub-bandgap (4.75 eV and 3.05 eV) and above-bandgap (21.2 eV) excitation. Energy-resolved photoemission spectra in vacuum using different incident photon energies reveal two distinct energy distributions, reflecting different emission pathways. While oxidation greatly reduces electron emission into vacuum using both sub-bandgap and above-bandgap sources, facile electron emission into water persists on the oxidized samples using sub-bandgap excitation and is directly observed through transient optical absorption measurements using sub-bandgap excitation. Low-energy inverse photoemission spectroscopy shows that oxidation leads to broad distribution of surface states throughout the diamond bandgap. Our studies highlightmore » « less
-
Grafting polymer chains to the surface of nanoparticles overcomes the challenge of nanoparticle dispersion within nanocomposites and establishes high-volume fractions that are found to enable enhanced material mechanical properties. This study utilizes coarse-grained molecular dynamics simulations to quantify how the shear modulus of polymer-grafted nanoparticle (PGN) systems in their glassy state depends on parameters such as strain rate, nanoparticle size, grafting density, and chain length. The results are interpreted through further analysis of the dynamics of chain conformations and volume fraction arguments. The volume fraction of nanoparticles is found to be the most influential variable in deciding the shear modulus of PGN systems. A simple rule of mixture is utilized to express the monotonic dependence of shear modulus on the volume fraction of nanoparticles. Due to the reinforcing effect of nanoparticles, shortening the grafted chains results in a higher shear modulus in PGNs, which is not seen in linear systems. These results offer timely insight into calibrating molecular design parameters for achieving the desired mechanical properties in PGNs.more » « less
