skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 10:00 PM ET on Friday, February 6 until 10:00 AM ET on Saturday, February 7 due to maintenance. We apologize for the inconvenience.


Title: Modifying Inorganic Structure through Hydration in Vapor Phase Infiltrated AlO x H y -PIM-1 Hybrid Membranes: Implications for Solvent Stability, Permeance, and Selectivity
Vapor-phase infiltration (VPI) presents a promising approach to enhancing the stability of organic membranes in organic solvents while maintaining critical properties, such as membrane permeance and selectivity. However, the precise chemical structure of the infiltrated inorganics and their impact on solvent stability remain poorly understood, limiting efforts to improve VPI treated hybrid membrane technology for organic solvent reverse osmosis (OSRO). This study uses X-ray absorption spectroscopy alongside X-ray photoelectron spectroscopy (XPS) to elucidate the inorganic cluster structure within PIM-1/AlOxHy. By analyzing the H2O ratio via XPS and assessing the first and second shell Al coordination numbers from Al K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy, we propose that aluminum oxyhydroxide tends to form nonlinear networked structures. X-ray absorption near-edge spectroscopy (XANES) analysis confirms a predominantly six-coordinate structure in the first shell, while EXAFS analysis of the second shell reveals the presence of three aluminum atoms, suggesting clusters significantly larger than simple dimers or trimers, similar to larger aluminum hydroxide and oxyhydroxide crystal structures. Furthermore, we demonstrate that postprocessing techniques, such as dehydration and rehydration, can be utilized to control this network structure and membrane permeance and selectivity without compromising solvent stability.  more » « less
Award ID(s):
1921873
PAR ID:
10653319
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
ACS
Date Published:
Journal Name:
Chemistry of Materials
Volume:
37
Issue:
11
ISSN:
0897-4756
Page Range / eLocation ID:
3959 to 3968
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Vapor phase infiltration (VPI) is a vapor processing technique that converts polymers into organic–inorganic hybrid materials with modified properties. VPI of polymer membranes stabilizes against dissolution and swelling in organic liquids, opening up new opportunities for use in organic solvent reverse osmosis (OSRO) separations. However, the precise chemical structure of the infiltrated inorganic components remains poorly understood, limiting the potential to fully exploit process–structure–property relations for materials design and slowing the development of new hybrid membranes. This study explores the structural characteristics contributing to the chemical stability of PIM-1/ZnOxHy hybrid membranes through advanced spectroscopic techniques to clarify the chemistry and inorganic cluster formation in these materials that lead to enhanced stability in solvents that otherwise swell or dissolve the pure polymer. X-ray photoelectron spectroscopy (XPS) indicates a predominantly zinc hydroxide chemistry with higher proportions of oxide forming only at increasing cycle counts. Extended X-ray absorption fine structure (EXAFS) spectroscopy provides new understanding of the first and second coordination shells. These results indicate that the size of the clusters increases with prolonged VPI precursor exposure and additional VPI cycles, leading to improvements in membrane solvent stability. These findings offer a new understanding for how the physicochemical structure of these hybrid membranes can be characterized and then used to design for a desired performance. 
    more » « less
  2. A solvent-free post-treatment process known as vapor phase infiltration (VPI) is used to engineer the organic solvent reverse osmosis (OSRO) performance of polymer of intrinsic microporosity 1 (PIM-1) membranes via infiltration of trimethylaluminum (TMA) metal-organic vapor. The infiltration of inorganic aluminum constituents hybridizes the pure polymer PIM-1 into an organic-inorganic material (AlOxHy/PIM-1) with enhanced chemical stability. A homogenous distribution of inorganic loading in PIM-1 is achieved due to the reaction-limited infiltration mechanism, and the OSRO performance is enhanced as a result. OSRO separations of ethanol/isooctane mixtures using these membranes are shown to be capable of breaking the azeotropic composition with a separation factor for ethanol over isooctane greater than 5 and an ethanol permeance of 0.1 Lm–2h–1bar–1. Thus, these organic-inorganic hybrid membranes created via VPI show promise as an alternative method for separating azeotropic liquid mixtures. 
    more » « less
  3. The X-ray absorption spectroscopy including Extended X ray Absorption Fine Structure (EXAFS) , X ray Absorption Near Edge Structure (XANES) and X-ray absorption near edge and pre edge feature is used to analyze the nature and concentration of iron in plants, spinach and parsley. Primary data was collected at Cornell High Energy Synchrotron Source. Data analyses were done by community college students. EXAFS data analysis process include edge normalization, background subtraction, transformation to k space from energy, Fourier transformation, back transform of selected peaks, and curve fitting to identify type and number of near neighbor atoms. X-ray absorption pre=edge feature, which appears as very small absorption peak before the main peak, is used to study ironoxygen bonding and asymmetry of iron compounds. Pre edge data analysis include extraction of the pre-edge from main absorption spectrum, normalization to main edge height, and Lorentzian fit to back ground subtracted data. X-ray absorption data from spinach and parsley, as well as several iron supplements and the soil of which plants were grown was analyzed. The preliminary data analysis pre edge feature yields two forms of iron in both plants. One form has oxygen as near neighbor atoms and the other without oxygen. 
    more » « less
  4. null (Ed.)
    In this study, we show how strong metal–support interaction (SMSI) oxides in Pt–Nb/SiO 2 and Pt–Ti/SiO 2 affect the electronic, geometric and catalytic properties for propane dehydrogenation. Transmission electron microscopy (TEM), CO chemisorption, and decrease in the catalytic rates per gram Pt confirm that the Pt nanoparticles were partially covered by the SMSI oxides. X-ray absorption near edge structure (XANES), in situ X-ray photoelectron spectroscopy (XPS), and resonant inelastic X-ray scattering (RIXS) showed little change in the energy of Pt valence orbitals upon interaction with SMSI oxides. The catalytic activity per mol of Pt for ethylene hydrogenation and propane dehydrogenation was lower due to fewer exposed Pt sites, while turnover rates were similar. The SMSI oxides, however, significantly increase the propylene selectivity for the latter reaction compared to Pt/SiO 2 . In the SMSI catalysts, the higher olefin selectivity is suggested to be due to the smaller exposed Pt ensemble sites, which result in suppression of the alkane hydrogenolysis reaction; while the exposed atoms remain active for dehydrogenation. 
    more » « less
  5. Mo K-edge X-ray absorption spectroscopy (XAS) is used to probe the structure of wild-type Campylobacter jejuni nitrate reductase NapA and the C176A variant. The results of extended X-ray absorption fine structure (EXAFS) experiments on wt NapA support an oxidized Mo(VI) hexacoordinate active site coordinated by a single terminal oxo donor, four sulfur atoms from two separate pyranopterin dithiolene ligands, and an additional S atom from a conserved cysteine amino acid residue. We found no evidence of a terminal sulfido ligand in wt NapA. EXAFS analysis shows the C176A active site to be a 6-coordinate structure, and this is supported by EPR studies on C176A and small molecule analogs of Mo(V) enzyme forms. The SCys is replaced by a hydroxide or water ligand in C176A, and we find no evidence of a coordinated sulfhydryl (SH) ligand. Kinetic studies show that this variant has completely lost its catalytic activity toward nitrate. Taken together, the results support a critical role for the conserved C176 in catalysis and an oxygen atom transfer mechanism for the catalytic reduction of nitrate to nitrite that does not employ a terminal sulfido ligand in the catalytic cycle. 
    more » « less