An official website of the United States government
We investigate the impact of solvents on the microstructure of poly(methylhydrosiloxane)/divinylbenzene (PMHS/DVB) aerogels. The gels are obtained in highly diluted conditions via hydrosilylation reaction of PMHS bearing Si-H groups and cross-linking it with C=C groups of DVB. Polymer aerogels are obtained after solvent exchange with liquid CO2 and subsequent supercritical drying. Samples are characterized using microscopy and porosimetry. Common pore-formation concepts do not provide a solid rationale for the observed data. We postulate that solubility and swelling of the cross-linked polymer in various solvents are major factors governing pore formation of these PMHS/DVB polymer aerogels.
more »
« less
This content will become publicly available on June 1, 2026
Mitigating Shrinkage and Enhancing the Structure of Thermally Insulating Starch Aerogel via Solvent Exchange and Chitin Addition
Bio-based compostable starch aerogels have significant potential as a sustainable alternative to traditional polymer aerogels across various applications. However, they suffer from very significant shrinkage, shown in published work as 40–50% using existing processes. We hypothesized that the shrinkage is largely caused by pore collapse through the solvent exchange process, during which the water used to fabricate the starch matrix is replaced with ethanol. To mitigate this issue, this work introduces two strategies: (1) implementing a deep-freezing protocol (DFP) prior to the solvent exchange, followed by pure ethanol solvent exchanges instead of water/ethanol mixtures, and (2) incorporating chitin as a structural additive. As a baseline, we fabricated potato starch aerogels (PSAs) using conventional processes of mixing, heating, and retrogradation. By applying a DFP before pure ethanol exchanges, shrinkage was reduced from 44% to 10% in pure PSA samples. Furthermore, the addition of chitin reduced shrinkage to 8% in potato starch-chitin aerogels. Porosity, density, surface area, pore size distribution, thermal decomposition temperature, thermal conductivities, and scanning electron microscopy images demonstrate a correlation between reduced shrinkage and desired thermal material properties.
more »
« less
- Award ID(s):
- 1950672
- PAR ID:
- 10654620
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Macromol
- Volume:
- 5
- Issue:
- 2
- ISSN:
- 2673-6209
- Page Range / eLocation ID:
- 28
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Nano-porous aerogels are an advantageous approach to produce low-density materials with high surface area, particularly when using biobased materials. Frequently, most biobased aerogels are synthesized through a bottom-up approach, which requires high energy inputs to break and rebuild the raw materials, and for elimination of water. To curb this, this work focused on generating aerogels by a top-down approach through the delignification of a wood substrate while eliminating water by solvent exchange. To diversify the surface chemistry for use in water treatment, the delignified wood–nanowood-was coated with a chitosan–cyclodextrin co-polymer and tested in the capture of microcystin-LR. The generated nanowood structure had 75% porosity after coating, with up to 339% water swelling and an adsorption capacity of 0.12 mg g −1 of the microcystin. This top-down technique enables the generation of low-cost aerogels by reducing steps, using a biobased self-assembled coating with hydrophobic active sites, and avoiding costly energetic input.more » « less
-
Abstract Aerogels are highly porous structures produced by replacing the liquid solvent of a gel with air without causing a collapse in the solid network. Unlike conventional fabrication methods, additive manufacturing (AM) has been applied to fabricate 3D aerogels with customized geometries specific to their applications, designed pore morphologies, multimaterial structures, etc. To date, three major AM technologies (extrusion, inkjet, and stereolithography) followed by a drying process have been proposed to additively manufacture 3D functional aerogels. 3D‐printed aerogels and porous scaffolds showed great promise for a variety of applications, including tissue engineering, electrochemical energy storage, controlled drug delivery, sensing, and soft robotics. In this review, the details of steps included in the AM of aerogels and porous scaffolds are discussed, and a general frame is provided for AM of those. Then, the different postprinting processes are addressed to achieve the porosity (after drying); and mechanical strength, functionality, or both (after postdrying thermal or chemical treatments) are provided. Furthermore, the applications of the 3D‐printed aerogels/porous scaffolds made from a variety of materials are also highlighted. The review is concluded with the current challenges and an outlook for the next generation of 3D‐printed aerogels and porous scaffolds.more » « less
-
Abstract The 3D freeze printing (3DFP) of nanocellulose aerogels are demonstrated with large‐scale aligned pore orientations as a sustainable alternative to current acoustical materials. In contrast with the unidirectional pore network orientations obtained from current 3DFP techniques, a bidirectional orientation is achieved by using an inhomogeneous printing substrate to alter the thermal gradient within the print volume. The microstructural morphology shows that bidirectional printing results in a 2D pore orientation, with comparatively thinner pore walls and larger pore widths. Acoustic measurements reveal that altering the pore network characteristics significantly affects the acoustical behavior of the printed CNC aerogels; the wider pores allow the bidirectional CNC aerogels to provide higher sound absorption performance at lower frequencies than the unidirectional samples. Notably, both 3D Freeze printed CNC aerogels provide substantially higher sound transmission loss performance as compared to current acoustical materials. The unidirectional pore structure results in CNC aerogels with higher stiffness and improved energy absorption performance, with both 3D freeze printed CNC aerogels outperforming other CNC aerogel materials in their stiffness‐to‐density ratios. The ability to simultaneously control their pore orientation and macrostructural geometry paves the way for printing complex shaped CNC aerogel structures for multifunctional noise control applications.more » « less
-
Extraction of valuable chemicals from food waste via computational solvent screening and experimentsVlachos, Dionisios G. (Ed.)About 1.3 billion tons of global food production end up in landfills and composting, leading to significant anthropogenic greenhouse gas (GHG) emissions. Extracting antioxidant and antimicrobial chemicals (flavonoids, phenolic acids, etc.) from food waste is an economically lucrative valorization strategy but is hindered by efficient solvent selection. Here we perform in silico high throughput screening to identify high solubility solvents for key phenolics and reveal >100+ higher-performing solvents than the traditional ethanol and methanol. Solubilities of nine shortlisted solvents are measured and found in reasonable agreement with model predictions. Analysis of the Conductor like Screening Model for Real Solvents (COSMO-RS) σ-profiles and Hansen Solubility Parameters reveals that polarity and hydrogen bonding make dimethylformamide (DMF) an excellent single solvent. We showcase the replacement of high-solubility toxic solvents with green mixtures and demonstrate the approach to potato peel waste. Our work provides a blueprint for solvent selection and generates new insights into extraction from food waste.more » « less
