An official website of the United States government
Truck platooning and related autonomous vehicle coordination concepts have been proposed as sustainable ways to increase profits and improve service quality. Recently the concept of truck caravanning, a hybrid truck platooning with only one truck driver required per platoon, has been proposed in the literature. This paper describes the research effort in developing a model that can estimate the cost savings of truck caravanning. The motivation of the proposed model is to investigate if substantial monetary savings exist to justify the initial capital investment (both in equipment and infrastructure) required for the implementation of the truck caravanning concept. A linear programming model is developed and used to evaluate different size networks. Results from numerical experiments indicate that a caravan size of four trucks or greater is needed for significant cost savings to be achieved and that driver compensation is the most critical factor dictating profitability.
more »
« less
This content will become publicly available on November 1, 2026
Truck drivers and autonomous trucks: a topic modeling analysis of truck driver posts
- Award ID(s):
- 2041215
- PAR ID:
- 10656634
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Transportation Research Interdisciplinary Perspectives
- Volume:
- 34
- Issue:
- C
- ISSN:
- 2590-1982
- Page Range / eLocation ID:
- 101765
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Utility trucks with boom equipment function on environmentally sensitive areas and severe terrains where off-road conditions may cause significant damage to the trucks’ mobility and their safe operation. Indeed, considerable variations of landscape elevation and dynamic changes of terrain properties lead to extensive differences in the wheel normal reactions, drastic fluctuations of the rolling resistance at each tire, and finally, substantial changes in the total resistance to motion, which includes both the tire rolling resistance and the resistance due to the truck gravity component. Additionally, lateral forces caused by truck inclinations can lead to instability in motion, too. As a result, a utility truck can become immobilized in either longitudinal or lateral direction of movement because of one or the combination of the following events – loss of longitudinal mobility due to extensive tire slippage at some/all wheels, loss of lateral mobility due to tire side skid or rollover of the truck. To eliminate the above-listed causes that can lead to the utility truck immobilization, this study suggests a novel approach to managing the input/output factors that influence both longitudinal and lateral forces of the utility truck. In fact, the 3D morphing of the boom equipment is proposed as the input factor for managing the wheel normal reactions as the outputs. Ultimately, a changeable positioning of the boom equipment relative to the truck frame results in variable wheel normal reactions, which are the main contributors to the normal tire deformation and soil compaction, and thus, to the rolling resistance of each and all tires. This paper presents and discusses the method and results of computational simulations of the F450-based utility truck with boom equipment on medium mineral soil. The normal reaction at each wheel is evaluated under which the boom equipment morphs safely without causing roll over of the truck and, consequently, the total resistance to the motion force is determined. Modeling and simulation of the truck were conducted with the use of terramechanics-based tire-terrain models. This research study of the rolling resistance contributes to a research project on morphing utility truck, dynamics in severe terrain conditions. Keywords: Utility Truck, Morphing, Terrain Mobilitymore » « less
