skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Impact of Salt on Cohesive Sediment Transport
The erosion and transport of cohesive sediment are more difficult to study than non-cohesive sediment, largely because these processes vary with the salt in the water. Clay minerals are the major components that contribute to the cohesiveness of cohesive sediment because they have significantly larger surface charges and surface area-to-volume ratio than non-cohesive sediment. The electrochemically active clay surfaces can adsorb ions on their surfaces, form an electrical double layer, and cause clay particles to aggregate or form a gel. In this chapter, we first discuss the properties of clay minerals, including the structure of clay primary particles, their surface charge and area, and their interaction with ions in water. The surface charges and surface areas of clay are several orders of magnitude larger than non-cohesive sand, thus predisposing it to interactions with salt in aqueous environments. Second, we summarize studies that reveal the role of salts, specifically salinity and sodium absorption ratio (SAR), on sediment aggregation, stability, and settling speed. An increase in salinity from 0.15 to 1.5 ppt has been shown to increase the erosion threshold of smectite clay by more than 10 times. These findings underscore the crucial role of salt in shaping cohesive sediment transport.  more » « less
Award ID(s):
2150796
PAR ID:
10656935
Author(s) / Creator(s):
;
Publisher / Repository:
IntechOpen
Date Published:
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Frontiers in Marine Science)
    null (Ed.)
    Biophysical cohesive particles in aquatic systems, such as extracellular polymeric substances (EPS) and clay minerals, play an important role in determining the transport of spilled oil contamination and its eventual fate, particularly given that suspended sediment and microbial activities are often prevalent and diverse in natural environments. A series of stirring jar tests have been conducted to understand the multiple structures characteristics of the oil-mineral aggregates (OMAs) and EPS-oil-mineral aggregates (EPS-OMAs). OMAs and EPS-OMAs have been successfully generated in the laboratory within artificial seawater using: Texas crude oil (Dynamic viscosity: 7.27 × 10 –3 Pa⋅s at 20°C), two natural clay minerals (Bentonite and Kaolin clay), and Xanthan gum powder (a proxy of natural EPS). A magnetic stirrer produced a homogeneous turbulent flow with a high turbulence level similar to that under natural breaking waves. High-resolution microscopy results show that EPS, kaolinite, and bentonite lead to distinguished oil floc structures because of the different stickiness character of EPS and mineral clay particles. With relatively low stickiness, kaolinite particles tend to attach to an oil droplets surface (droplet OMAs) and become dominant in small-sized flocs in the mixture sample. In contrast, the more cohesive bentonite particles stickiness could adsorb with oil droplets and are thus dominated by larger sized flocs. Biological EPS, with the highest stickiness, demonstrated that it could bond multiple small oil droplets and form a web structure trapping oil and minerals. Generally, adding EPS leads to flake/solid OMAs formation, and individual oil droplets are rarely observed. The inclusion of ESP within the matrix, also reduced the dependence of settling velocity on floc size and mineral type. 
    more » « less
  2. ; ; (, Journal of Geophysical Research: Earth Surface)
    Abstract Clay is the main component that contributes to sediment cohesiveness. Salinity impacts its transport, which controls the electrochemical force among the sediment grains. Here, we quantify the impacts of salinity on the erosion threshold, yield stress, and the microstructures of a fluorescently labeled smectite clay, laponite, by combining flume experiments, rheometer measurements, and macro‐ and microscopic imaging. We show that the critical shear stress for clay erosion,τb,crit, increases by one order of magnitude with increasing salinity when salinity <1.5 ppt and slightly decreases when salinity >1.5 ppt showing a weaker dependency upon salinity. We further show that the yield stress,τy, of the clay remains roughly a constant at salinity less than 1.5 ppt and decreases by over one order of magnitude at salinity larger than 1.5 ppt. This change in the dependency ofτb,critand yield stress on salinity corresponds to a change in the gelatinous state of clay, from gel‐like structures to phase‐separated structures as salinity increases. Our results provide a quantitative characterization of the dependency of clay erosion threshold and yield stress on salinity and highlight the importance of the clay gelatinous state in controlling clay transport. 
    more » « less
  3. ; ; ; ; (, Water Resources Research)
    Abstract Sand‐clay mixtures are common in both freshwater and saltwater environments, yet how they behave under different levels of salinity remains poorly understood. Here, we demonstrate the impact of salinity on the rheological properties and erosion threshold of sand‐clay mixtures through systematically controlled flume experiments and rheological measurements. Mixtures with a representative bentonite‐to‐sand ratio typical of natural estuarine and coastal sediments were prepared at salinities ranging from 0 to 35 parts per thousand (ppt), spanning freshwater to seawater conditions. We measured viscosity, flow‐point stress, and yield stress of the mixtures using a rheometer and determined the critical bed shear stress in a water‐recirculating flume. Our results indicate that as salinity increases from 0 to 35 ppt, the critical bed shear stress decreases by about two orders of magnitude, from about 60 Pa at 0 ppt to less than 1 Pa at 35 ppt. Similarly, both the flow‐point stress and yield stress decreased by over two orders of magnitude with increasing salinity. These changes correspond to a salinity‐induced transition of the sand‐bentonite mixture from a cohesive, strong‐gel state in freshwater (0 ppt), to a weak‐gel state between 3 and 10 ppt, and finally to a fluid‐like state above 10 ppt. Our research highlights the important role of salt in controlling the rheological properties and erosion threshold of fresh, non‐consolidated deposits of sand‐clay mixtures, with implications for predicting coastal landscape evolution and designing erosion‐control strategies. 
    more » « less
  4. ; ; ; ; (, Frontiers in Earth Science)
    The flocculation behavior of clay minerals in aquatic environments is an important process in estuarine and riverine dynamics, where strong gradients in salinity can locally occur. Various contradicting observations have been reported in the literature on the impact of salt concentration on the settling process of cohesive sediments. To address this issue in a systematic manner, we investigate the settling behavior of clay minerals as a function of the salt concentration of the ambient water. Specifically, we focus on montmorillonite as a prototype clay mineral with a high cation exchange capacity (CEC). To this end, we study suspensions of Wyoming bentonite (Volclay SPV) as a very important constituent for many constructional and industrial purposes. We perform an experimental campaign to study the settling behavior of moderately turbid montmorillonite concentrations in monovalent salt solutions with different salinities (sodium chloride) to represent different environments ranging from deionized to ocean water, respectively. The subsequent settling process was monitored by taking pictures by a camera in regular time intervals over a total observation time up to 48 h. In addition, a modified hydrometer analysis is conducted to determine the grain size distribution (in terms of an equivalent diameter) of the flocculated clay suspension in salt water. Despite the rather high cation exchange capacity of the investigated clay (CEC=88.1), our results show that the settling speed drastically increases within a range of 0.6–1.0 PSU and stays approximately constant for higher salinities. This critical salt concentration is defined here as the critical coagulation concentration (CCC) and lies well below the salinity of natural open water bodies. The hydrometer analysis revealed that 60% of the agglomerates exceed the equivalent grain size of 20 μm. Finally, the findings of this study are supplemented with experiments studying the effect of Extracellular Polymeric Substances (EPS) on the flocculation behavior of bentonite in salt water. Our results demonstrate that salinity is the original trigger for flocculation, whereas EPS allows for even larger floc size but it does not play a significant role for the settling processes of bentonite in estuarine environments. 
    more » « less
  5. ; ; (, Journal of Geophysical Research: Biogeosciences)
    Abstract Particle size greatly influences the fate of phosphorus (P) in estuaries as P adheres more readily to the larger surface area in smaller sized particles. Here, data on two size fractions of particulate matter, permanently suspended particulate matter (PSPM, ≤40 μm) and resuspended particulate matter (RSPM, >40 μm), from field and controlled laboratory erosion experiments were analyzed to determine their relative contribution to water column P in the mouth of the Susquehanna River in the upper Chesapeake Bay. Based on the composition of sequentially extracted P pools, C and N isotopes, and elemental data, all PSPM and the majority of RSPM are most likely derived from allochthonous sources through river transport. A minor fraction of particulate matter in the water column was derived from sediment resuspension, which had a dominant role above the sediment‐water interface in the river's mouth. The proportion of biologically available P pools to recalcitrant P pools in suspended particulate matter decreased with water column depth, indicating their preferential removal or biological utilization during settling. Suspended particulate matter (SPM) mobilized during sediment erosion experiments, regardless of particle size, was richer in biologically available P pools than SPM in the field, suggesting higher mobility of these pools in the field. These complementary results from field and field‐simulated laboratory erosion experiments provide unique insights into the composition of particulate matter under different hydrodynamic regimes in the river estuary. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email