skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on June 22, 2026

Title: Comparative Analysis of the Dual-Path Hybrid Switched-Capacitor DC-DC Converter and the 3-Level Buck Converter
Dual-Path (DP) DC-DC converters have been proposed as an alternative to traditional hybrid switched capacitor (SC) converters that can operate with a smaller, lower-quality, or higher effective series-resistance ESR inductor. The dual-path approach uses a partially hard-switched flying capacitor to reduce DC inductor current and associated resistive conduction losses. However, the SC hard-charging losses and higher inductor current ripple can partially or completely offset the advantage of reduced inductor DC current depending on the operating conditions and component parameters. In this work, we develop a unified model for all four 2:1 SC-based DP converters that captures SC hard-charging loss and inductor conduction loss as a function of conversion ratio, switching frequency, flying capacitance, and inductor ESR with fixed-volume inductor scaling. While there are regimes where the DP approach has advantages, there are also many scenarios where the traditional hybrid approach outperforms the respective dual-path alternative.  more » « less
Award ID(s):
2333329 2431868
PAR ID:
10659438
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
IEEE
Date Published:
Page Range / eLocation ID:
1 to 8
Subject(s) / Keyword(s):
DC-DC converter, switched capacitor, flying capacitor multilevel converter FCML, three-level buck, dual path
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, 2018 IEEE Energy Conversion Congress and Exposition (ECCE))
    This paper presents a new dual inductor hybrid converter (DIHC) that is capable of efficient direct non-isolated DC-DC conversions with extremely large voltage conversion ratios. The converter employs two interleaved inductors and a switched-capacitor (SC) network to bring several significant topological benefits. Capacitance of the flying capacitors of this new topology can be optimally sized to achieve natural, complete soft-charging for all capacitors. This novel capacitor soft-charging feature is a key contribution of this work and can be exploited to overcome the limitations of conventional SC converters suffering from capacitor hard charging losses. The converter topology and its operation are verified in an 36-W converter prototype for 40-120V input to 0.9V-1.8V output up to 20A of current load that achieves peak efficiencies of 91.5% for 120V-to-1.8V and 87.3% for 120V-to-0.9V conversion. Its advantages and performance at extreme conversion ratios push the limit of point-of-load converters, reducing complexity and cost for bus voltage distributions, as well as enabling fewer conversion stages and thus higher efficiency for data centers and high-performance digital systems. 
    more » « less
  2. ; ; ; ; ; (, 2019 20th Workshop on Control and Modeling for Power Electronics (COMPEL))
    This paper presents a modeling method to accurately predict DC and ripple values of flying capacitor voltages and inductor currents in hybrid converters by recognizing a key relationship between median and average values of these state variables. The method is demonstrated for the Dual-Phase Multi-Inductor Hybrid (DP-MIH) converter and 3-Level Buck converter. Analytical details and intuitive explanations are presented for the well-known balancing problem of flying capacitor voltages and inductor current fluctuations in hybrid converters. Simulation results for the converters at different operating conditions are provided to verify the method and analytical results. 
    more » « less
  3. ; (, 2019 IEEE Applied Power Electronics Conference and Exposition (APEC))
    This paper describes the topology, fundamental operations, and key characteristics of a Dual-Phase Multi-Inductor Hybrid (DP-MIH) Converter for Point of Load (POL) telecommunication and data center applications. The circuit topology employs a unique configuration of switched-inductor and capacitor pairs to achieve complete soft charging and native voltage balancing of flying capacitors regardless of mismatches and variations in capacitor and inductor values. The converter topology and its operation are verified by a five-level DP-MIH converter prototype capable of delivering maximum load of 100A at 1V-5V regulated output voltages from a 48V input supply. It achieves 90.9% peak efficiency and 440 w/in3 power density for 48V-to-1V conversion and 95.3% and 2200W/in3 for a 48V-to-5V conversion. 
    more » « less
  4. ; (, IEEE International Solid- State Circuits Conference (ISSCC))
    null (Ed.)
    Efficient high-conversion-ratio power delivery is needed for many portable computing applications which require sub-volt supply rails but operate from batteries or USB power sources. In such applications, the power management unit should have a small volume, area, and height while providing fast transient response. Past work has shown favorable performance of hybrid switched-capacitor (SC) converters to reduce the size of needed inductor(s), which can soft-charge high-density SC networks while supporting efficient voltage regulation [1-5]. However, the hybrid approach has its own challenges including balancing the voltage of the flying capacitor and achieving safe but fast startup. Rapid supply transients, including startup, can cause voltage stress on power switches if flying capacitors are not quickly regulated. Past approaches such as precharge networks [3] or fast balancing control [5] have startup times that are on the order of milliseconds. This paper presents a two-stage cascaded hybrid SC converter that features a fast transient response with automatic flying capacitor balancing for low-voltage applications (i.e., 5V:0.4 to 1.2V from a USB interface). The converter is nearly standalone and all gate drive supplies are generated internally. Measured results show a peak efficiency of 96.9%, <; 36mV under/overshoot for 1A/μs load transients, and self-startup time on the order of 10μs (over 100× faster than previous works). 
    more » « less
  5. ; ; ; (, 2018 IEEE 61st International Midwest Symposium on Circuits and Systems (MWSCAS))
    This paper proposes a complementary topology for Switched-Capacitor (SC) DC-DC converter to enhance the dynamic response. For battery charging unit with faster charging time requirement, one of the major restrictions comes from the equivalent output resistance of the SC DC-DC converter. By connecting one completely symmetric SC converter as complementary topology with the original single converter, the proposed SC DC-DC converter topology decreases the equivalent output resistance down to half. Simulated in 0.13-μm standard CMOS process, the simulation results show that this complementary SC converter gains faster dynamic response, shorter charging time, and higher energy-conversion efficiency. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email