skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.
Attention:The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 7:00 AM ET to 7:30 AM ET on Friday, April 24 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • In situ monitoring of polarons in a mixed conducting polymer using ultrafast transient absorption spectroelectrochemistry
Title: In situ monitoring of polarons in a mixed conducting polymer using ultrafast transient absorption spectroelectrochemistry
Organic mixed ionic–electronic conducting polymers remain at the forefront of materials development for bioelectronic device applications. During electrochemical operation, structural dynamics and variations in electrostatic interactions in the polymer occur, which affect dual transport of the ions and electronic charge carriers. Such effects remain unclear due to a lack of in situ spectroscopic methods capable of capturing these dynamics, which hinders the rational design of higher-performance polymers. Herein, we present the first in situ transient absorption spectroelectrochemical measurement of a conducting polymer in the near-infrared, where photoexcited charge carrier dynamics are used to directly probe their nanoscale environment and trapping behavior in working electrodes. In this method, voltage is applied to charge or discharge the polymer, and the picosecond relaxation dynamics of directly photoexcited charge carriers are spectroscopically monitored to relate their location within the heterogeneous polymer nanostructure to their transport behavior. Applying this technique to working PEDOT:PSS electrodes, we investigated the impacts of voltage-induced changes in polymer chain packing and ion–carrier interactions on charge trapping. At lower voltages, carriers initially form within J-aggregated PEDOT chains that are deeply trapped due to strong electrostatic coupling to PSS− counterions. At higher voltages, the PEDOT lamellae expand and charge–ion pairs enter the PEDOT-rich domains, where trapping is decreased and carriers delocalize among the more tightly stacked, H-aggregated PEDOT chains. Further, this in situ spectroscopic method can also be more broadly applied to study electrochemical dynamics in accumulation-mode and n-type polymer electrodes and electrochemical transistors.  more » « less
Award ID(s):
2441676
PAR ID:
10668072
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
Royal Society of Chemistry
Date Published:
Journal Name:
Chemical Science
Volume:
16
Issue:
38
ISSN:
2041-6520
Page Range / eLocation ID:
17839-17849
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, SPIE Digital Library)
    Son, Minjung; Muscarella, Loreta A (Ed.)
    Organic mixed ionic-electronic conducting polymers continue to emerge as promising next-generation materials for electrochemical applications ranging from bioelectronics to energy storage. However, we lack a clear understanding of how electrostatic and nanostructural changes in the polymer, which evolve during electrochemical device operation, influence charge and ion conductivity. In this work, we applied ultrafast near-infrared pump-probe spectroscopy, which is sensitive to the local nanostructure and electronic environment of charge carriers (polarons), to an electrochemically doped poly(3-hexylthiophene-2,5-diyl) [P3HT] model polymer system. The impact of electrolyte infiltration on carrier trapping was tested by comparing its photoexcited polaron dynamics to those measured in a chemically doped P3HT film lacking electrolyte and containing the same polaron mole fraction (~15%) and ClO4 − counterions. The transient absorption spectra revealed the presence of Coulombically free and trapped (ion-bound) polarons in both the electrochemically and chemically doped P3HT films, with a greater relative number of free polarons in the latter. However, the ion-bound polarons were less deeply trapped on average in the electrochemically doped film, suggesting that charge trapping was suppressed due to electrostatic screening by the electrolyte. This study highlights how fundamental knowledge gained from past chemically doped polymer studies cannot directly be applied to understand conductivity in mixed conducting polymers, encouraging future spectroscopic studies of charge trapping behavior in their electrochemically active states. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, The Journal of Chemical Physics)
    Mixtures of layered perovskite quantum wells with different sizes form prototypical light-harvesting antenna structures in solution-processed films. Gradients in the bandgaps and energy levels are established by concentrating the smallest and largest quantum wells near opposing electrodes in photovoltaic devices. Whereas short-range energy and charge carrier funneling behaviors have been observed in layered perovskites, our recent work suggests that such light-harvesting processes do not assist long-range charge transport due to carrier trapping at interfaces between quantum wells and interstitial organic spacer molecules. Here, we apply a two-pulse time-of-flight technique to a family of layered perovskite systems to explore the effects that interstitial organic molecules have on charge carrier dynamics. In these experiments, the first laser pulse initiates carrier drift within the active layer of a photovoltaic device, whereas the second pulse probes the transient concentrations of photoexcited carriers as they approach the electrodes. The instantaneous drift velocities determined with this method suggest that the rates of trap-induced carrier deceleration increase with the concentrations of organic spacer cations. Overall, our experimental results and model calculations suggest that the layered perovskite device efficiencies primarily reflect the dynamics of carrier trapping at interfaces between quantum wells and interstitial organic phases. 
    more » « less
  3. ; ; ; (, AU Scholarly Repository)
    Charge carrier mobility is a key factor underlying the performance of conjugated polymers as conductive materials for flexible and lightweight electronics. Chemical doping is typically used to improve polymer conductivity by increasing the carrier density. However, doping consequently induces both morphological and electrostatic changes within the polymer that impact charge mobility, the extent to which remains unclear. Using regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) polymer films with tuned morphology and controlled ion-carrier distance, we investigated the influence of nanoscale chain ordering on the device-scale mobility of its chemically-induced carriers. Grazing-incidence x-ray diffraction measurements revealed that chemically doping the films resulted in a similar lamellar d-spacing of ~18.5 Å, despite differences in chain ordering within their nanocrystalline domains. Transient absorption (TA) spectroscopy was used to examine the relaxation of hole polarons excited with 0.62 eV (2000 nm) light to study their trapping behavior, and the results were compared with field-effect mobility measurements. Despite a 4-fold difference in hole mobility, the average relaxation times of the mobile and trapped polarons were identically ~0.1 ps and 17 ps, respectively, between the two films. The TA results only showed qualitative differences in the ratio of mobile to trapped polarons, indicating that ordered nanocrystalline domains facilitate the formation of free polarons, which enhance the hole mobility. The results from this study suggest that TA spectroscopy can be used as an electrode-free method of assessing the local mobility of doping-induced charge carriers, and that nanoscale chain ordering – and not just mesoscale structure or ion-carrier distance – is essential to control for improving the device-scale mobility of polarons. 
    more » « less
  4. ; ; ; (, Physical Chemistry Chemical Physics)
    Charge carrier mobility is a key factor underlying the performance of conjugated polymers as conductive materials for flexible and lightweight electronics. Chemical doping is typically used to improve polymer conductivity by increasing the carrier density. However, doping consequently induces both morphological and electrostatic changes within the polymer that impact charge mobility, the extent to which remains unclear. Using regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) polymer films with tuned morphology and controlled ion-carrier distance, we investigated the influence of nanoscale chain ordering on the device-scale mobility of its chemically-induced carriers. Grazing-incidence X-ray diffraction measurements revealed that chemically doping the films resulted in a similar lamellar d-spacing of ∼18.5 Å, despite differences in chain ordering within their nanocrystalline domains. Transient absorption (TA) spectroscopy was used to examine the relaxation of hole polarons excited with 0.62 eV (2000 nm) light to study their trapping behavior, and the results were compared with field-effect mobility measurements. Despite a 4-fold difference in hole mobility, the average relaxation times of the mobile and trapped polarons were identically ∼0.1 ps and 17 ps, respectively, between the two films. The TA results only showed qualitative differences in the ratio of mobile to trapped polarons, indicating that ordered nanocrystalline domains facilitate the formation of free polarons, which enhance the hole mobility. The results from this study suggest that TA spectroscopy can be used as an electrode-free method of assessing the local mobility of doping-induced charge carriers, and that nanoscale chain ordering – and not just mesoscale structure or ion-carrier distance – is essential to control for improving the device-scale mobility of polarons. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials Interfaces)
    Abstract Semiconducting polymers are of interest due to their solution processibility and broad electronic applications. Electrochemistry allows these wide bandgap semiconductors to be converted to conducting polymers by doping such polymers at various potentials. When polymers arep‐doped to improve their conductivity via electrochemical oxidation, various positively‐charged carriers are created, including polarons (singly‐charged) and bipolarons (doubly‐charged). Carrier creation is accompanied by anion intercalation from the electrolyte for charge balance, and this insertion requires ion mobility. In this work, poly(3‐hexylthiophene) (P3HT) with different regioregularities is used to understand the relationship between solvent swelling, which affects anion intercalation, and electrochemical doping. Cyclic voltammetry, optical absorption spectroscopy, and grazing incidence wide‐angle X‐ray scattering (GIWAXS) measurements are used to correlate the doping level with structural changes. In situ electrochemical quartz crystal microbalance (EQCM) measurements are used to quantify the swelling of the polymers dynamically during electrochemical cycling. Lastly, in situ conductivity measurements are done to measure the effect of swelling on the ionic and electronic conductivity. The results indicate that solvent swelling is required for bipolaron formation, and that swelling facilitates both the small structural changes need for polaron formation and the disordering required for bipolaron formation. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email