Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
This paper presents a Discrete Variable Stiffness Actuator (DVSA) based on a Variable Stiffness Parallel Beam (VSPB), where stiffness modulation is achieved through block insertion and cross-sectional reconfiguration. The actuator employs a solenoid-driven planar push-push mechanism to enable rapid and synchronized switching among three discrete stiffness levels. A theoretical stiffness model is established and validated through comparisons among analytical calculations, simulation results, and experimental measurements. The results demonstrate that the proposed model provides high predictive accuracy within practical parameter ranges. A prototype actuator is fabricated, and torque control experiments are conducted under different stiffness configurations. The system achieves a stiffness variation ratio of 78. A PID-based closed-loop controller ensures stable torque tracking performance. By introducing a rollback-assisted strategy, online stiffness switching is realized under closed-loop operation without compromising system stability. Owing to its compact structure, low energy consumption, and reconfigurable stiffness capability, the proposed DVSA is suitable for safety-critical cobots and humanoid robotic systems, providing an effective solution for applications requiring both compliance and high stiffness.more » « lessFree, publicly-accessible full text available October 29, 2027
-
Conventional hand rehabilitation devices typically provide a single open-close motion therapy, limiting their ability to perform complex joint-specific exercises that have been shown to improve recovery outcomes for stroke patients. This paper presents the design, fabrication, and experimental validation of a second-generation Variable Stiffness Soft Actuator (VSSA-2) integrated into an exoskeleton glove for multi-grip hand rehabilitation. The VSSA-2 employs a PneuNet-based bending mechanism with a sliding stiffness beam to selectively block individual finger joints, enabling alternative rehabilitation therapies including the straight fist, hook fist, and table-top fist. The actuator is fabricated using silicone molding with a two-part mold process, addressing the air leakage issues encountered in the prior 3D-printed prototype. A Yeoh second-order hyperelastic material model is employed for Finite Element Analysis (FEA) simulations, which are validated against experimental deformation trajectories across three joint-blocking configurations. The results demonstrate close agreement between FEA and experiments, with RMSE values of 4.953, 1.314, and 0.400 mm for the three configurations. Performance tests comparing the VSSA-2 glove against a commercially available hand rehabilitation device (CAHRD) show that the VSSA-2 generates 2.43 times greater fingertip force while providing the unique capability of joint-selective actuation. The proposed device demonstrates the feasibility of variable stiffness technology for personalized, multi-grip hand rehabilitation.more » « lessFree, publicly-accessible full text available July 21, 2027
-
Free, publicly-accessible full text available August 1, 2027
-
Liu, H.; Yin, Z.; Liu, L.; Jiang, L.; Gu, G.; Wu, X.; Ren, W. (Ed.)Variable stiffness grippers can adapt to objects with different shapes and gripping forces. This paper presents a novel variable stiffness gripper (VSG) based on the Fin Ray effect that can adjust stiffness discretely. The main structure of the gripper includes the compliant frame, rotatable ribs, and the position limit components attached to the compliant frame. The stiffness of the gripper can be adjusted by rotating the specific ribs in the frame. There are four configurations for the gripper that were developed in this research: a) all ribs OFF (Flex) mode; b) upper ribs ON and lower ribs OFF (Hold) mode; c) upper ribs OFF and lower ribs ON (Pinch) mode; d) all ribs ON (Clamp) mode. Different configurations can provide various stiffness for the gripper’s finger to adapt the objects with different shapes and weights. To optimize the design, the stiffness analysis under various configurations and force conditions was implemented by finite element analysis (FEA). The 3-D printed prototypes were constructed to verify the feature and performance of the design concept of the VSG compared with the FEA results. The design of the VSG provides a novel idea for industrial robots and collaborative robots on adaptive grasping.more » « less
-
Bijker, R; Marín Lámbarri, DJ; Yépez Martínez, TC (Ed.)The Cabibbo-Kobayashi-Maskawa quark mixing matrix currently does not satisfy unitarity at the 2σ-level. This could be the result of an inaccurate value of one or both of its largest matrix elementsVusandVud. In the case ofVud, the most precise measurement is obtained from thef t-value measurements of superallowed beta-transitions between 0+states. The accuracy of this determination can, in turn, be tested by extractingVudin other transitions including superallowed transitions between mirror nuclei. The Superallowed Transition Beta-Neutrino Decay Ion Coincidence Trap (St. Benedict) is currently under construction at the Nuclear Science Laboratory of the University of Notre Dame to perform such a determination, with the goal of shedding more light on this tension with unitarity. St. Benedict will take a radioactive ion beam produced byTwinSol, thermalize it in a large volume gas catcher, then transport it in two separate differentially-pumped volumes using a radio-frequency (RF) carpet and a radio-frequency quadrupole (RFQ) ion guide before injecting it in an RFQ trap to create cool ion bunches for injection in the measurement Paul trap. In this paper, we detail the installation of the beam preparation components of St. Benedict, and present the results of the first RIBs successfully stopped and extracted from its gas catcher.more » « less
An official website of the United States government
